Release of version 0.14.0 (#2754)

docs/source/pythonapi/base.rst

@@ -160,6 +160,7 @@ Geometry Plotting
    :template: myclass.rst
 
    openmc.Plot
+   openmc.ProjectionPlot
    openmc.Plots
 
 Running OpenMC

docs/source/releasenotes/index.rst

@@ -7,6 +7,7 @@ Release Notes
 .. toctree::
   :maxdepth: 1
 
+  0.14.0
   0.13.3
   0.13.2
   0.13.1

docs/source/usersguide/plots.rst

@@ -126,27 +126,29 @@ will depend on the 3D viewer, but should be straightforward.
 Projection Plots
 ----------------
 
-.. image:: ../_images/hexlat_anim.gif
-   :width: 200px
-
-The :class:`openmc.ProjectionPlot` class presents an alternative method
-of producing 3D visualizations of OpenMC geometries. It was developed to
-overcome the primary shortcoming of voxel plots, that an enormous number
-of voxels must be employed to capture detailed geometric features.
-Projection plots perform volume rendering on material or
-cell volumes, with colors specified in the same manner as slice plots.
-This is done using the native ray tracing capabilities within OpenMC,
-so any geometry in which particles successfully run without overlaps
-or leaks will work with projection plots.
-
-One drawback of projection plots is that particle tracks cannot be overlaid
-on them at present. Moreover, checking for overlap regions is not currently possible with projection plots. The image heading this section can
-be created by adding the following code to the hexagonal lattice example packaged
-with OpenMC, before exporting to plots.xml.
+.. only:: html
+
+   .. image:: ../_images/hexlat_anim.gif
+     :width: 200px
+
+The :class:`openmc.ProjectionPlot` class presents an alternative method of
+producing 3D visualizations of OpenMC geometries. It was developed to overcome
+the primary shortcoming of voxel plots, that an enormous number of voxels must
+be employed to capture detailed geometric features. Projection plots perform
+volume rendering on material or cell volumes, with colors specified in the same
+manner as slice plots. This is done using the native ray tracing capabilities
+within OpenMC, so any geometry in which particles successfully run without
+overlaps or leaks will work with projection plots.
+
+One drawback of projection plots is that particle tracks cannot be overlaid on
+them at present. Moreover, checking for overlap regions is not currently
+possible with projection plots. The image heading this section can be created by
+adding the following code to the hexagonal lattice example packaged with OpenMC,
+before exporting to plots.xml.
 
 ::
 
-  r = 5 
+  r = 5
   import numpy as np
   for i in range(100):
       phi = 2 * np.pi * i/100
@@ -162,48 +164,46 @@ with OpenMC, before exporting to plots.xml.
       thisp.xs[iron] = 1.0
       thisp.wireframe_domains = [fuel]
       thisp.wireframe_thickness = 2
-  
+
       plot_file.append(thisp)
 
-This generates a sequence of png files which can be joined to form a gif.
-Each image specifies a different camera position using some simple periodic
-functions to create a perfectly looped gif. :attr:`ProjectionPlot.look_at`
-defines where the camera's centerline should point at.
-:attr:`ProjectionPlot.camera_position` similarly defines where the camera
-is situated in the universe level we seek to plot. The other settings
-resemble those employed by :class:`openmc.Plot`, with the exception of
-the :class:`ProjectionPlot.set_transparent` method and :attr:`ProjectionPlot.xs`
-dictionary. These are used to control volume rendering of material
-volumes. "xs" here stands for cross section, and it defines material
-opacities in units of inverse centimeters. Setting this value to a
-large number would make a material or cell opaque, and setting it to
-zero makes a material transparent. Thus, the :class:`ProjectionPlot.set_transparent`
-can be used to make all materials in the geometry transparent. From there,
-individual material or cell opacities can be tuned to produce the
-desired result.
-
-Two camera projections are available when using these plots, perspective
-and orthographic. The default, perspective projection,
-is a cone of rays passing through each pixel which radiate from the camera
-position and span the field of view in the x and y positions. The horizontal
-field of view can be set with the :attr: `ProjectionPlot.horizontal_field_of_view` attribute,
-which is to be specified in units of degrees. The field of view only influences
-behavior in perspective projection mode.
+This generates a sequence of png files which can be joined to form a gif. Each
+image specifies a different camera position using some simple periodic functions
+to create a perfectly looped gif. :attr:`ProjectionPlot.look_at` defines where
+the camera's centerline should point at. :attr:`ProjectionPlot.camera_position`
+similarly defines where the camera is situated in the universe level we seek to
+plot. The other settings resemble those employed by :class:`openmc.Plot`, with
+the exception of the :class:`ProjectionPlot.set_transparent` method and
+:attr:`ProjectionPlot.xs` dictionary. These are used to control volume rendering
+of material volumes. "xs" here stands for cross section, and it defines material
+opacities in units of inverse centimeters. Setting this value to a large number
+would make a material or cell opaque, and setting it to zero makes a material
+transparent. Thus, the :class:`ProjectionPlot.set_transparent` can be used to
+make all materials in the geometry transparent. From there, individual material
+or cell opacities can be tuned to produce the desired result.
+
+Two camera projections are available when using these plots, perspective and
+orthographic. The default, perspective projection, is a cone of rays passing
+through each pixel which radiate from the camera position and span the field of
+view in the x and y positions. The horizontal field of view can be set with the
+:attr: `ProjectionPlot.horizontal_field_of_view` attribute, which is to be
+specified in units of degrees. The field of view only influences behavior in
+perspective projection mode.
 
 In the orthographic projection, rays follow the same angle but originate from
-different points. The horizontal width of this plane of ray starting points
-may be set with the :attr: `ProjectionPlot.orthographic_width` element. If this element
-is nonzero, the orthographic projection is employed. Left to its default value
-of zero, the perspective projection is employed.
-
-Lastly, projection plots come packaged with wireframe generation that
-can target either all surface/cell/material boundaries in the geometry,
-or only wireframing around specific regions. In the above example, we
-have set only the fuel region from the hexagonal lattice example to have
-a wireframe drawn around it. This is accomplished by setting the
-:attr: `ProjectionPlot.wireframe_domains`, which may be set to either material
-IDs or cell IDs. The :attr:`ProjectionPlot.wireframe_thickness`
-attribute sets the wireframe thickness in units of pixels.
+different points. The horizontal width of this plane of ray starting points may
+be set with the :attr: `ProjectionPlot.orthographic_width` element. If this
+element is nonzero, the orthographic projection is employed. Left to its default
+value of zero, the perspective projection is employed.
+
+Lastly, projection plots come packaged with wireframe generation that can target
+either all surface/cell/material boundaries in the geometry, or only wireframing
+around specific regions. In the above example, we have set only the fuel region
+from the hexagonal lattice example to have a wireframe drawn around it. This is
+accomplished by setting the :attr: `ProjectionPlot.wireframe_domains`, which may
+be set to either material IDs or cell IDs. The
+:attr:`ProjectionPlot.wireframe_thickness` attribute sets the wireframe
+thickness in units of pixels.
 
 .. note:: When setting specific material or cell regions to have wireframes
           drawn around them, the plot must be colored by materials if wireframing

include/openmc/boundary_condition.h

@@ -18,6 +18,8 @@ class Surface;
 
 class BoundaryCondition {
 public:
+  virtual ~BoundaryCondition() = default;
+
   //! Perform tracking operations for a particle that strikes the boundary.
   //! \param p The particle that struck the boundary.  This class is not meant
   //!   to directly modify anything about the particle, but it will do so

include/openmc/version.h.in

@@ -10,7 +10,7 @@ namespace openmc {
 constexpr int VERSION_MAJOR {@OPENMC_VERSION_MAJOR@};
 constexpr int VERSION_MINOR {@OPENMC_VERSION_MINOR@};
 constexpr int VERSION_RELEASE {@OPENMC_VERSION_RELEASE@};
-constexpr bool VERSION_DEV {true};
+constexpr bool VERSION_DEV {false};
 constexpr std::array<int, 3> VERSION {VERSION_MAJOR, VERSION_MINOR, VERSION_RELEASE};
 // clang-format on
 

openmc/__init__.py

@@ -39,4 +39,4 @@
 from openmc.model import Model
 
 
-__version__ = '0.14.0-dev'
+__version__ = '0.14.0'

openmc/deplete/results.py

@@ -104,6 +104,8 @@ def get_activity(
     ) -> Tuple[np.ndarray, typing.Union[np.ndarray, List[dict]]]:
         """Get activity of material over time.
 
+        .. versionadded:: 0.14.0
+
         Parameters
         ----------
         mat : openmc.Material, str
@@ -220,6 +222,8 @@ def get_decay_heat(
     ) -> Tuple[np.ndarray, typing.Union[np.ndarray, List[dict]]]:
         """Get decay heat of material over time.
 
+        .. versionadded:: 0.14.0
+
         Parameters
         ----------
         mat : openmc.Material, str

openmc/model/surface_composite.py

@@ -1321,7 +1321,7 @@ def _plane(axis, name, value, boundary_type='transmission', albedo=1.0):
 class RectangularPrism(CompositeSurface):
     """Infinite rectangular prism bounded by four planar surfaces.
 
-    .. versionadded:: 0.13.4
+    .. versionadded:: 0.14.0
 
     Parameters
     ----------
@@ -1445,6 +1445,8 @@ def __neg__(self):
 class HexagonalPrism(CompositeSurface):
     """Hexagonal prism comoposed of six planar surfaces
 
+    .. versionadded:: 0.14.0
+
     Parameters
     ----------
     edge_length : float

openmc/plots.py

@@ -990,6 +990,8 @@ class ProjectionPlot(PlotBase):
     projections are more similar to a pinhole camera, and orthographic projections
     preserve parallel lines and distances.
 
+    .. versionadded:: 0.14.0
+
     Parameters
     ----------
     plot_id : int

openmc/source.py

@@ -121,6 +121,8 @@ def from_xml_element(cls, elem: ET.Element, meshes=None) -> openmc.SourceBase:
 class IndependentSource(SourceBase):
     """Distribution of phase space coordinates for source sites.
 
+    .. versionadded:: 0.14.0
+
     Parameters
     ----------
     space : openmc.stats.Spatial