Deploy a Kubernetes cluster for free, using K3s and Oracle always free resources.
- Important notes
- Requirements
- Supported OS
- Example RSA key generation
- Project setup
- Oracle provider setup
- Pre flight checklist
- Notes about OCI always free resources
- Notes about K3s
- Infrastructure overview
- Cluster resource deployed
- Deploy
- Deploy a sample stack
- Clean up
- Known Bugs
Note choose a region with enough ARM capacity
- This is repo shows only how to use terraform with the Oracle Cloud infrastructure and use only the always free resources. This examples are not for a production environment.
- At the end of your trial period (30 days). All the paid resources deployed will be stopped/terminated
- At the end of your trial period (30 days), if you have a running compute instance it will be stopped/hibernated
To use this repo you will need:
- an Oracle Cloud account. You can register here
Once you get the account, follow the Before you begin and 1. Prepare step in this document.
This module was tested with:
- Ubuntu 20.04, 22.04 (ubuntu remote user)
- Oracle Linux 8, 9 (opc remote user)
Is always recommended to create a separate user an group to use with Terraform. This user must have less privileges possible (Zero trust policy). This is an example policy that allow terraform-group to manage all the resources needed by this module:
Allow group terraform-group to manage virtual-network-family in compartment id <compartment_ocid>
Allow group terraform-group to manage instance-family in compartment id <compartment_ocid>
Allow group terraform-group to manage compute-management-family in compartment id <compartment_ocid>
Allow group terraform-group to manage volume-family in compartment id <compartment_ocid>
Allow group terraform-group to manage load-balancers in compartment id <compartment_ocid>
Allow group terraform-group to manage network-load-balancers in compartment id <compartment_ocid>
Allow group terraform-group to manage dynamic-groups in compartment id <compartment_ocid>
Allow group terraform-group to manage policies in compartment id <compartment_ocid>
Allow group terraform-group to read network-load-balancers in compartment id <compartment_ocid>
See how to find the compartment ocid. The user and the group have to be manually created before using this module. To create the user go to Identity & Security -> Users, then create the group in Identity & Security -> Groups and associate the newly created user to the group. The last step is to create the policy in Identity & Security -> Policies.
To use terraform with the Oracle Cloud infrastructure you need to generate an RSA key. Generate the rsa key with:
openssl genrsa -out ~/.oci/<your_name>-oracle-cloud.pem 4096
chmod 600 ~/.oci/<your_name>-oracle-cloud.pem
openssl rsa -pubout -in ~/.oci/<your_name>-oracle-cloud.pem -out ~/.oci/<your_name>-oracle-cloud_public.pem
replace <your_name> with your name or a string you prefer.
NOTE ~/.oci/<your_name>-oracle-cloud_public.pem this string will be used on the terraform.tfvars used by the Oracle provider plugin, so please take note of this string.
Clone this repo and go in the example/ directory:
git clone https://github.com/garutilorenzo/k3s-oci-cluster.git
cd k3s-oci-cluster/example/
Now you have to edit the main.tf file and you have to create the terraform.tfvars file. For more detail see Oracle provider setup and Pre flight checklist.
Or if you prefer you can create an new empty directory in your workspace and create this three files:
- terraform.tfvars - More details in Oracle provider setup
- main.tf
- provider.tf
The main.tf file will look like:
variable "compartment_ocid" {
}
variable "tenancy_ocid" {
}
variable "user_ocid" {
}
variable "fingerprint" {
}
variable "private_key_path" {
}
variable "region" {
default = "<change_me>"
}
module "k3s_cluster" {
region = var.region
availability_domain = "<change_me>"
compartment_ocid = var.compartment_ocid
my_public_ip_cidr = "<change_me>"
cluster_name = "<change_me>"
environment = "staging"
source = "github.com/garutilorenzo/k3s-oci-cluster"
}
output "k3s_servers_ips" {
value = module.k3s_cluster.k3s_servers_ips
}
output "k3s_workers_ips" {
value = module.k3s_cluster.k3s_workers_ips
}
output "public_lb_ip" {
value = module.k3s_cluster.public_lb_ip
}
For all the possible variables see Pre flight checklist
The provider.tf will look like:
provider "oci" {
tenancy_ocid = var.tenancy_ocid
user_ocid = var.user_ocid
private_key_path = var.private_key_path
fingerprint = var.fingerprint
region = var.region
}
Now we can init terraform with:
terraform init
terraform init
Initializing modules...
Downloading git::https://github.com/garutilorenzo/k3s-oci-cluster.git for k3s_cluster...
- k3s_cluster in .terraform/modules/k3s_cluster
Initializing the backend...
Initializing provider plugins...
- Reusing previous version of hashicorp/oci from the dependency lock file
- Reusing previous version of hashicorp/template from the dependency lock file
- Using previously-installed hashicorp/template v2.2.0
- Using previously-installed hashicorp/oci v4.64.0
Terraform has been successfully initialized!
You may now begin working with Terraform. Try running "terraform plan" to see
any changes that are required for your infrastructure. All Terraform commands
should now work.
If you ever set or change modules or backend configuration for Terraform,
rerun this command to reinitialize your working directory. If you forget, other
commands will detect it and remind you to do so if necessary.
In the example/ directory of this repo you need to create a terraform.tfvars file, the file will look like:
fingerprint = "<rsa_key_fingerprint>"
private_key_path = "~/.oci/<your_name>-oracle-cloud_public.pem"
user_ocid = "<user_ocid>"
tenancy_ocid = "<tenency_ocid>"
compartment_ocid = "<compartment_ocid>"
To find your tenency_ocid in the Ocacle Cloud console go to: Governance and Administration > Tenency details, then copy the OCID.
To find you user_ocid in the Ocacle Cloud console go to User setting (click on the icon in the top right corner, then click on User settings), click your username and then copy the OCID
The compartment_ocid is the same as tenency_ocid.
The fingerprint is the fingerprint of your RSA key, you can find this vale under User setting > API Keys
Once you have created the terraform.tfvars file edit the main.tf file (always in the example/ directory) and set the following variables:
| Var | Required | Desc |
|---|---|---|
region |
yes |
set the correct OCI region based on your needs |
availability_domain |
yes |
Set the correct availability domain. See how to find the availability domain |
compartment_ocid |
yes |
Set the correct compartment ocid. See how to find the compartment ocid |
cluster_name |
yes |
the name of your K3s cluster. Default: k3s-cluster |
my_public_ip_cidr |
yes |
your public ip in cidr format (Example: 195.102.xxx.xxx/32) |
environment |
yes |
Current work environment (Example: staging/dev/prod). This value is used for tag all the deployed resources |
os_image_id |
yes |
Image id to use. See how to list all available OS images |
k3s_version |
no |
K3s version. Default: latest |
k3s_subnet |
no |
Subnet where K3s will be exposed. Rquired if the subnet is different from the default gw subnet (Eg. 192.168.1.0/24). Default: default_route_table |
compute_shape |
no |
Compute shape to use. Default VM.Standard.A1.Flex. NOTE Is mandatory to use this compute shape for provision 4 always free VMs |
oci_core_vcn_dns_label |
no |
VCN DNS label. Default: defaultvcn |
oci_core_subnet_dns_label10 |
no |
First subnet DNS label. Default: defaultsubnet10 |
oci_core_subnet_dns_label11 |
no |
Second subnet DNS label. Default: defaultsubnet11 |
oci_core_vcn_cidr |
no |
VCN CIDR. Default: oci_core_vcn_cidr |
oci_core_subnet_cidr10 |
no |
First subnet CIDR. Default: 10.0.0.0/24 |
oci_core_subnet_cidr11 |
no |
Second subnet CIDR. Default: 10.0.1.0/24 |
oci_identity_dynamic_group_name |
no |
Dynamic group name. This dynamic group will contains all the instances of this specific compartment. Default: Compute_Dynamic_Group |
oci_identity_policy_name |
no |
Policy name. This policy will allow dynamic group 'oci_identity_dynamic_group_name' to read OCI api without auth. Default: Compute_To_Oci_Api_Policy |
k3s_load_balancer_name |
no |
Internal LB name. Default: k3s internal load balancer |
public_load_balancer_name |
no |
Public LB name. Default: K3s public LB |
kube_api_port |
no |
Kube api default port Default: 6443 |
public_lb_shape |
no |
LB shape for the public LB. Default: flexible. NOTE is mandatory to use this kind of shape to provision two always free LB (public and private) |
http_lb_port |
no |
http port used by the public LB. Default: 80 |
https_lb_port |
no |
http port used by the public LB. Default: 443 |
k3s_server_pool_size |
no |
Number of k3s servers deployed. Default 2 |
k3s_worker_pool_size |
no |
Number of k3s workers deployed. Default 2 |
install_nginx_ingress |
no |
Boolean value, install kubernetes nginx ingress controller instead of Traefik. Default: true. For more information see Nginx ingress controller |
| nginx_ingress_controller_http_nodeport | ||
nginx_ingress_controller_http_nodeport |
no |
NodePort where nginx ingress will listen for http traffic. Default 30080 |
nginx_ingress_controller_https_nodeport |
no |
NodePort where nginx ingress will listen for https traffic. Default 30443 |
install_longhorn |
no |
Boolean value, install longhorn "Cloud native distributed block storage for Kubernetes". Default: true. To use longhorn set the k3s_version < v1.25.x Ref. |
longhorn_release |
no |
Longhorn release. Default: v1.2.3 |
install_certmanager |
no |
Boolean value, install cert manager "Cloud native certificate management". Default: true |
certmanager_release |
no |
Cert manager release. Default: v1.8.2 |
certmanager_email_address |
no |
Email address used for signing https certificates. Defaul: [email protected] |
install_argocd |
no |
Boolean value, install Argo CD "a declarative, GitOps continuous delivery tool for Kubernetes.". Default: true |
argocd_release |
no |
Argo CD release. Default: v2.4.11 |
install_argocd_image_updater |
no |
Boolean value, install Argo CD Image Updater "A tool to automatically update the container images of Kubernetes workloads that are managed by Argo CD.". Default: true |
argocd_image_updater_release |
no |
Argo CD release Image Updater. Default: v0.12.0 |
unique_tag_key |
no |
Unique tag name used for tagging all the deployed resources. Default: k3s-provisioner |
unique_tag_value |
no |
Unique value used with unique_tag_key. Default: https://github.com/garutilorenzo/k3s-oci-cluster |
expose_kubeapi |
no |
Boolean value, default false. Expose or not the kubeapi server to the internet. Access is granted only from my_public_ip_cidr for security reasons. |
PATH_TO_PUBLIC_KEY |
no |
Path to your public ssh key (Default: "~/.ssh/id_rsa.pub) |
To find the list of the availability domains run this command on che Cloud Shell:
oci iam availability-domain list
{
"data": [
{
"compartment-id": "<compartment_ocid>",
"id": "ocid1.availabilitydomain.oc1..xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
"name": "iAdc:EU-ZURICH-1-AD-1"
}
]
}
To filter the OS images by shape and OS run this command on che Cloud Shell. You can filter by OS: Canonical Ubuntu or Oracle Linux:
oci compute image list --compartment-id <compartment_ocid> --operating-system "Canonical Ubuntu" --shape "VM.Standard.A1.Flex"
{
"data": [
{
"agent-features": null,
"base-image-id": null,
"billable-size-in-gbs": 2,
"compartment-id": null,
"create-image-allowed": true,
"defined-tags": {},
"display-name": "Canonical-Ubuntu-20.04-aarch64-2022.01.18-0",
"freeform-tags": {},
"id": "ocid1.image.oc1.eu-zurich-1.aaaaaaaag2uyozo7266bmg26j5ixvi42jhaujso2pddpsigtib6vfnqy5f6q",
"launch-mode": "NATIVE",
"launch-options": {
"boot-volume-type": "PARAVIRTUALIZED",
"firmware": "UEFI_64",
"is-consistent-volume-naming-enabled": true,
"is-pv-encryption-in-transit-enabled": true,
"network-type": "PARAVIRTUALIZED",
"remote-data-volume-type": "PARAVIRTUALIZED"
},
"lifecycle-state": "AVAILABLE",
"listing-type": null,
"operating-system": "Canonical Ubuntu",
"operating-system-version": "20.04",
"size-in-mbs": 47694,
"time-created": "2022-01-27T22:53:34.270000+00:00"
},
In order to get the maximum resources available within the oracle always free tier, the max amount of the k3s servers and k3s workers must be 2. So the max value for k3s_server_pool_size and k3s_worker_pool_size is 2.
In this setup we use two LB, one internal LB and one public LB (Layer 7). In order to use two LB using the always free resources, one lb must be a network load balancer an the other must be a load balancer. The public LB must use the flexible shape (public_lb_shape variable).
In this environment the High Availability of the K3s cluster is provided using the Embedded DB. More details here
The default installation of K3s install Traefik as ingress the controller. In this environment Traefik is replaced by Nginx ingress controller. To install Traefik as the ingress controller set the variable install_nginx_ingress to false. For more details on Nginx ingress controller see the Nginx ingress controller section.
The final infrastructure will be made by:
- two instance pool:
- one instance pool for the server nodes named "k3s-servers"
- one instance pool for the worker nodes named "k3s-workers"
- one internal load balancer that will route traffic to K3s servers
- one external load balancer that will route traffic to K3s workers
The other resources created by terraform are:
- two instance configurations (one for the servers and one for the workers) used by the instance pools
- one vcn
- two public subnets
- two security list
- one dynamic group
- one identity policy
This setup will automatically install longhorn. Longhorn is a Cloud native distributed block storage for Kubernetes. To disable the longhorn deployment set install_longhorn variable to false
NOTE to use longhorn set the k3s_version < v1.25.x Ref.
In this environment Nginx ingress controller is used instead of the standard Traefik ingress controller.
The installation is the bare metal installation, the ingress controller then is exposed via a NodePort Service.
---
apiVersion: v1
kind: Service
metadata:
name: ingress-nginx-controller-loadbalancer
namespace: ingress-nginx
spec:
selector:
app.kubernetes.io/component: controller
app.kubernetes.io/instance: ingress-nginx
app.kubernetes.io/name: ingress-nginx
ports:
- name: http
port: 80
protocol: TCP
targetPort: 80
nodePort: ${nginx_ingress_controller_http_nodeport} # default to 30080
- name: https
port: 443
protocol: TCP
targetPort: 443
nodePort: ${nginx_ingress_controller_https_nodeport} # default to 30443
type: NodePortTo get the real ip address of the clients using a public L4 load balancer we need to use the proxy protocol feature of nginx ingress controller:
---
apiVersion: v1
data:
allow-snippet-annotations: "true"
enable-real-ip: "true"
proxy-real-ip-cidr: "0.0.0.0/0"
proxy-body-size: "20m"
use-proxy-protocol: "true"
kind: ConfigMap
metadata:
labels:
app.kubernetes.io/component: controller
app.kubernetes.io/instance: ingress-nginx
app.kubernetes.io/managed-by: Helm
app.kubernetes.io/name: ingress-nginx
app.kubernetes.io/part-of: ingress-nginx
app.kubernetes.io/version: 1.1.1
helm.sh/chart: ingress-nginx-4.0.16
name: ingress-nginx-controller
namespace: ingress-nginxNOTE to use nginx ingress controller with the proxy protocol enabled, an external nginx instance is used as proxy (since OCI LB doesn't support proxy protocol at the moment). Nginx will be installed on each worker node and the configuation of nginx will:
- listen in proxy protocol mode
- forward the traffic from port 80 to nginx_ingress_controller_http_nodeport (default to 30080) on any server of the cluster
- forward the traffic from port 443 to nginx_ingress_controller_https_nodeport (default to 30443) on any server of the cluster
This is the final result:
Client -> Public L4 LB -> nginx proxy (with proxy protocol enabled) -> nginx ingress (with proxy protocol enabled) -> k3s service -> pod(s)
cert-manager is used to issue certificates from a variety of supported source. To use cert-manager take a look at nginx-ingress-cert-manager.yml and nginx-configmap-cert-manager.yml example. To use cert-manager and get the certificate you need set on your DNS configuration the public ip address of the load balancer.
We are now ready to deploy our infrastructure. First we ask terraform to plan the execution with:
terraform plan
...
...
+ id = (known after apply)
+ ip_addresses = (known after apply)
+ is_preserve_source_destination = false
+ is_private = true
+ lifecycle_details = (known after apply)
+ nlb_ip_version = (known after apply)
+ state = (known after apply)
+ subnet_id = (known after apply)
+ system_tags = (known after apply)
+ time_created = (known after apply)
+ time_updated = (known after apply)
+ reserved_ips {
+ id = (known after apply)
}
}
Plan: 27 to add, 0 to change, 0 to destroy.
Changes to Outputs:
+ k3s_servers_ips = [
+ (known after apply),
+ (known after apply),
]
+ k3s_workers_ips = [
+ (known after apply),
+ (known after apply),
]
+ public_lb_ip = (known after apply)
──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
Note: You didn't use the -out option to save this plan, so Terraform can't guarantee to take exactly these actions if you run "terraform apply" now.
now we can deploy our resources with:
terraform apply
...
...
+ is_preserve_source_destination = false
+ is_private = true
+ lifecycle_details = (known after apply)
+ nlb_ip_version = (known after apply)
+ state = (known after apply)
+ subnet_id = (known after apply)
+ system_tags = (known after apply)
+ time_created = (known after apply)
+ time_updated = (known after apply)
+ reserved_ips {
+ id = (known after apply)
}
}
Plan: 27 to add, 0 to change, 0 to destroy.
Changes to Outputs:
+ k3s_servers_ips = [
+ (known after apply),
+ (known after apply),
]
+ k3s_workers_ips = [
+ (known after apply),
+ (known after apply),
]
+ public_lb_ip = (known after apply)
Do you want to perform these actions?
Terraform will perform the actions described above.
Only 'yes' will be accepted to approve.
Enter a value: yes
...
...
module.k3s_cluster.oci_network_load_balancer_backend.k3s_kube_api_backend[0]: Still creating... [50s elapsed]
module.k3s_cluster.oci_network_load_balancer_backend.k3s_kube_api_backend[0]: Still creating... [1m0s elapsed]
module.k3s_cluster.oci_network_load_balancer_backend.k3s_kube_api_backend[0]: Creation complete after 1m1s [...]
Apply complete! Resources: 27 added, 0 changed, 0 destroyed.
Outputs:
k3s_servers_ips = [
"X.X.X.X",
"X.X.X.X",
]
k3s_workers_ips = [
"X.X.X.X",
"X.X.X.X",
]
public_lb_ip = tolist([
"X.X.X.X",
])
Now on one master node you can check the status of the cluster with:
ssh X.X.X.X -lubuntu
ubuntu@inst-iwlqz-k3s-servers:~$ sudo su -
root@inst-iwlqz-k3s-servers:~# kubectl get nodes
NAME STATUS ROLES AGE VERSION
inst-axdzf-k3s-workers Ready <none> 4m34s v1.22.6+k3s1
inst-hmgnl-k3s-servers Ready control-plane,etcd,master 4m14s v1.22.6+k3s1
inst-iwlqz-k3s-servers Ready control-plane,etcd,master 6m4s v1.22.6+k3s1
inst-lkvem-k3s-workers Ready <none> 5m35s v1.22.6+k3s1
We can now test the public load balancer, nginx ingress controller and the security list ingress rules. On your local PC run:
curl -v http://<PUBLIC_LB_IP>
* Trying PUBLIC_LB_IP:80...
* TCP_NODELAY set
* Connected to PUBLIC_LB_IP (PUBLIC_LB_IP) port 80 (#0)
> GET / HTTP/1.1
> Host: PUBLIC_LB_IP
> User-Agent: curl/7.68.0
> Accept: */*
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 404 Not Found
< Date: Fri, 25 Feb 2022 14:03:09 GMT
< Content-Type: text/html
< Content-Length: 146
< Connection: keep-alive
<
<html>
<head><title>404 Not Found</title></head>
<body>
<center><h1>404 Not Found</h1></center>
<hr><center>nginx</center>
</body>
</html>
* Connection #0 to host PUBLIC_LB_IP left intact
404 is a correct response since the cluster is empty. We can test also the https listener/backends:
curl -k -v https://<PUBLIC_LB_IP>
* Trying PUBLIC_LB_IP:443...
* TCP_NODELAY set
* Connected to PUBLIC_LB_IP (PUBLIC_LB_IP) port 443 (#0)
* ALPN, offering h2
* ALPN, offering http/1.1
* successfully set certificate verify locations:
* CAfile: /etc/ssl/certs/ca-certificates.crt
CApath: /etc/ssl/certs
* TLSv1.3 (OUT), TLS handshake, Client hello (1):
* TLSv1.3 (IN), TLS handshake, Server hello (2):
* TLSv1.2 (IN), TLS handshake, Certificate (11):
* TLSv1.2 (IN), TLS handshake, Server key exchange (12):
* TLSv1.2 (IN), TLS handshake, Server finished (14):
* TLSv1.2 (OUT), TLS handshake, Client key exchange (16):
* TLSv1.2 (OUT), TLS change cipher, Change cipher spec (1):
* TLSv1.2 (OUT), TLS handshake, Finished (20):
* TLSv1.2 (IN), TLS handshake, Finished (20):
* SSL connection using TLSv1.2 / ECDHE-RSA-AES256-GCM-SHA384
* ALPN, server accepted to use http/1.1
* Server certificate:
* subject: C=IT; ST=Italy; L=Brescia; O=GL Ltd; OU=IT; CN=testlb.domainexample.com; [email protected]
* start date: Feb 25 10:28:29 2022 GMT
* expire date: Feb 25 10:28:29 2023 GMT
* issuer: C=IT; ST=Italy; L=Brescia; O=GL Ltd; OU=IT; CN=testlb.domainexample.com; [email protected]
* SSL certificate verify result: self signed certificate (18), continuing anyway.
> GET / HTTP/1.1
> Host: PUBLIC_LB_IP
> User-Agent: curl/7.68.0
> Accept: */*
>
* Mark bundle as not supporting multiuse
< HTTP/1.1 404 Not Found
< Date: Fri, 25 Feb 2022 13:48:19 GMT
< Content-Type: text/html
< Content-Length: 146
< Connection: keep-alive
<
<html>
<head><title>404 Not Found</title></head>
<body>
<center><h1>404 Not Found</h1></center>
<hr><center>nginx</center>
</body>
</html>
* Connection #0 to host PUBLIC_LB_IP left intact
To check if longhorn was successfully installed run on one master nodes:
kubectl get ns
NAME STATUS AGE
default Active 9m40s
kube-node-lease Active 9m39s
kube-public Active 9m39s
kube-system Active 9m40s
longhorn-system Active 8m52s <- longhorn namespace
root@inst-hmgnl-k3s-servers:~# kubectl get pods -n longhorn-system
NAME READY STATUS RESTARTS AGE
csi-attacher-5f46994f7-8w9sg 1/1 Running 0 7m52s
csi-attacher-5f46994f7-qz7d4 1/1 Running 0 7m52s
csi-attacher-5f46994f7-rjqlx 1/1 Running 0 7m52s
csi-provisioner-6ccbfbf86f-fw7q4 1/1 Running 0 7m52s
csi-provisioner-6ccbfbf86f-gwmrg 1/1 Running 0 7m52s
csi-provisioner-6ccbfbf86f-nsf84 1/1 Running 0 7m52s
csi-resizer-6dd8bd4c97-7l67f 1/1 Running 0 7m51s
csi-resizer-6dd8bd4c97-g66wj 1/1 Running 0 7m51s
csi-resizer-6dd8bd4c97-nksmd 1/1 Running 0 7m51s
csi-snapshotter-86f65d8bc-2gcwt 1/1 Running 0 7m50s
csi-snapshotter-86f65d8bc-kczrw 1/1 Running 0 7m50s
csi-snapshotter-86f65d8bc-sjmnv 1/1 Running 0 7m50s
engine-image-ei-fa2dfbf0-6rpz2 1/1 Running 0 8m30s
engine-image-ei-fa2dfbf0-7l5k8 1/1 Running 0 8m30s
engine-image-ei-fa2dfbf0-7nph9 1/1 Running 0 8m30s
engine-image-ei-fa2dfbf0-ndkck 1/1 Running 0 8m30s
instance-manager-e-31a0b3f5 1/1 Running 0 8m26s
instance-manager-e-37aa4663 1/1 Running 0 8m27s
instance-manager-e-9cc7cc9d 1/1 Running 0 8m20s
instance-manager-e-f39d9f2c 1/1 Running 0 8m29s
instance-manager-r-1364d994 1/1 Running 0 8m26s
instance-manager-r-c1670269 1/1 Running 0 8m20s
instance-manager-r-c20ebeb3 1/1 Running 0 8m28s
instance-manager-r-c54bf9a5 1/1 Running 0 8m27s
longhorn-csi-plugin-2qj94 2/2 Running 0 7m50s
longhorn-csi-plugin-4t8jm 2/2 Running 0 7m50s
longhorn-csi-plugin-ws82l 2/2 Running 0 7m50s
longhorn-csi-plugin-zmc9q 2/2 Running 0 7m50s
longhorn-driver-deployer-784546d78d-s6cd2 1/1 Running 0 8m58s
longhorn-manager-l8sd8 1/1 Running 0 9m1s
longhorn-manager-r2q5c 1/1 Running 1 (8m30s ago) 9m1s
longhorn-manager-s6wql 1/1 Running 0 9m1s
longhorn-manager-zrrf2 1/1 Running 0 9m
longhorn-ui-9fdb94f9-6shsr 1/1 Running 0 8m59s
You can verify that all pods are running:
root@inst-hmgnl-k3s-servers:~# kubectl get pods -n argocd
NAME READY STATUS RESTARTS AGE
argocd-application-controller-0 1/1 Running 0 8m51s
argocd-applicationset-controller-7b74965f8c-mjl97 1/1 Running 0 8m53s
argocd-dex-server-7f75d56bc6-j62hb 1/1 Running 0 8m53s
argocd-notifications-controller-54dd686846-lggrz 1/1 Running 0 8m53s
argocd-redis-5dff748d9c-s5q2l 1/1 Running 0 8m52s
argocd-repo-server-5576f8d84b-sgbbt 1/1 Running 0 8m52s
argocd-server-76cf7d4c7b-jq9qx 1/1 Running 0 8m52s
To fetch the initial admin password, to be able to do this you need to expose your kubeapi-server (set expose_kubeapi variable to ture) and fetch the kubeconfig from one of the server nodes, it will be in (/var/lib/rancher/k3s/server/cred/admin.kubeconfig):
kubectl -n argocd get secret argocd-initial-admin-secret -o jsonpath="{.data.password}" | base64 -d
To connect to the UI (make sure to copy the kubeconfig to your local machine first):
kubectl -n argocd port-forward service/argocd-server -n argocd 8080:443
After that you should be able to visit the ArgoCD UI: https://localhost:8080
Finally to test all the components of the cluster we can deploy a sample stack. The stack is composed by the following components:
- MariaDB
- Nginx
- Wordpress
Each component is made by: one deployment and one service. Wordpress and nginx share the same persistent volume (ReadWriteMany with longhorn storage class). The nginx configuration is stored in four ConfigMaps and the nginx service is exposed by the nginx ingress controller.
Deploy the resources with:
kubectl apply -f https://raw.githubusercontent.com/garutilorenzo/k3s-oci-cluster/master/deployments/mariadb/all-resources.yml
kubectl apply -f https://raw.githubusercontent.com/garutilorenzo/k3s-oci-cluster/master/deployments/wordpress/all-resources.yml
NOTE The Wordpress installation is secured. To allow external traffic to /wp-admin, /xmlrpc.php and wp-login.php you have to edit the deployments/nginx/all-resources.yml and change this line:
- name: SECURE_SUBNET
value: 8.8.8.8/32 # change-mewhit your public ip address CIDR.
curl -o nginx-all-resources.yml https://raw.githubusercontent.com/garutilorenzo/k3s-oci-cluster/master/deployments/nginx/all-resources.yml
vi nginx-all-resources.yml
change SECURE_SUBNET and save the file
kubectl apply -f nginx-all-resources.yml
now check the status:
kubectl get deployments
NAME READY UP-TO-DATE AVAILABLE AGE
mariadb 1/1 1 1 92m
nginx 1/1 1 1 79m
wordpress 1/1 1 1 91m
kubectl get svc
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
kubernetes ClusterIP 10.43.0.1 <none> 443/TCP 5h8m
mariadb-svc ClusterIP 10.43.184.188 <none> 3306/TCP 92m
nginx-svc ClusterIP 10.43.9.202 <none> 80/TCP 80m
wordpress-svc ClusterIP 10.43.242.26 <none> 9000/TCP 91m
Now you are ready to setup WP, open the LB public ip and follow the wizard. NOTE nginx and the Kubernetes Ingress rule are configured without virthual host/server name.
To clean the deployed resources:
kubectl delete -f https://raw.githubusercontent.com/garutilorenzo/k3s-oci-cluster/master/deployments/mariadb/all-resources.yml
kubectl delete -f https://raw.githubusercontent.com/garutilorenzo/k3s-oci-cluster/master/deployments/nginx/all-resources.yml
kubectl delete -f https://raw.githubusercontent.com/garutilorenzo/k3s-oci-cluster/master/deployments/wordpress/all-resources.yml
terraform destroy
If you see this error during the infrastructure destruction:
Error: 409-Conflict, Invalid State Transition of NLB lifeCycle state from Updating to Updating
│ Suggestion: The resource is in a conflicted state. Please retry again or contact support for help with service: Network Load Balancer Listener
│ Documentation: https://registry.terraform.io/providers/oracle/oci/latest/docs/resources/network_load_balancer_listener
│ API Reference: https://docs.oracle.com/iaas/api/#/en/networkloadbalancer/20200501/Listener/DeleteListener
re-run terraform destroy
The runc version in k3s containerd version 1.6.6 contains a regression that prevents anyone from executing a command and attaching to the container's TTY (exec -it) whenever someone runs systemctl daemon-reload. Alternatively, the user may run into this issue on SELinux-enforced systems. Ref.
kubectl exec -it -n kube-system cilium-6lqp9 -- cilium status
Defaulted container "cilium-agent" out of: cilium-agent, mount-cgroup (init), apply-sysctl-overwrites (init), mount-bpf-fs (init), wait-for-node-init (init), clean-cilium-state (init)
error: Internal error occurred: error executing command in container: failed to exec in container: failed to start exec "b67e6e00172071996430dac5c97352e4d0c9fa3b3888e8daece5197c4649b4d1": OCI runtime exec failed: exec failed: unable to start container process: open /dev/pts/0: operation not permitted: unknown
To solve this issue downgrade to k3s v1.23