on the road P4wnP1 ALOA menu
Installation instructions on boot partition edit config.txt to set I2C and SPI to active in termnial you can type nano /boot/config.txt find the section far away down and set :
dtparam=i2c_arm=on dtparam=i2c1=on
and find and set spi section
dtparam=spi=on
note : for the waveshare hat i used (and all gui.py is set like this) the inteface is SPI and not I2C if you have a I2C oled edit gui.py file and set on line 72 USER_I2C = 1 #set to 1 if your oled is I2C
GPIO 8 keys are default waveshare hat
you can edit to set to your hat if different GPIO KEY_UP_PIN : 6, KEY_DOWN_PIN : 19, KEY_LEFT_PIN : 5, KEY_RIGHT_PIN : 26, KEY_PRESS_PIN : 13, KEY1_PIN : 21, KEY2_PIN : 20, KEY3_PIN : 16
Remember this menu is in alpha version, not all function are ready
then to install , run sh install.sh and script will install all the files needed
in P4wnP1 web interface , if you want to menu start at "boot" create a trigger in you default template (by default startup) with : when service start => run script sh and choose runmenu.sh
enjoy