Task1 in my software engineering internship at Imagry, the Idea of this task is to get hands on C++ Language, and designing concepts. In this task, we are required to build a project in C++ so that we read a specific sequence of instructions from a text file and store them in ROM (it can only be written to once to store the instructions) and then deal with the instructions separately and execute them as required including This involves storing values in memory and reading from them. With emphasis on taking into account Clean and Maintainable Code.
we have a set of instructions in the Assembly language as follows:
- SET address value -> Store the value at the specified address
- ADD address1 address2 address3 -> address3 value = address1 value + address2 value .
- ADDI address1 value address2 -> address2 value = address1 value + imm value .
- JUMP address -> go to the specified address
- EXIT exit the program
- PRINT address -> print the content that store in this memory address
To install the project, run the following command in the terminal:
git clone https://github.com/faris771/Imagry_Task1.git
cd Imagry_Task1
To run the program, run the following commands in the terminal
Make sure Cmake is installed on your machine:
sudo snap install cmake --classicAfter installing Cmake:
mkdir build
cd build
cmake ..
make
./Faris