build(deps-dev): bump lint-staged from 13.3.0 to 15.2.4

[dependabot]

Bumps lint-staged from 13.3.0 to 15.2.4.

Release notes

Sourced from lint-staged's releases.

v15.2.4

Patch Changes

• 4f4537a Thanks @​iiroj! - Fix release issue with previous version; update dependencies

v15.2.3

Patch Changes

• #1407 d698162 Thanks @​iiroj! - Update dependencies

v15.2.2

Patch Changes

• #1391 fdcdad4 Thanks @​iiroj! - Lint-staged no longer tries to load configuration from files that are not checked out. This might happen when using sparse-checkout.

v15.2.1

Patch Changes

• #1387 e4023f6 Thanks @​iiroj! - Ignore stdin of spawned commands so that they don't get stuck waiting. Until now, lint-staged has used the default settings to spawn linter commands. This means the stdin of the spawned commands has accepted input, and essentially gotten stuck waiting. Now the stdin is ignored and commands will no longer get stuck. If you relied on this behavior, please open a new issue and describe how; the behavior has not been intended.

v15.2.0

Minor Changes

• #1371 f3378be Thanks @​iiroj! - Using the --no-stash flag no longer discards all unstaged changes to partially staged files, which resulted in inadvertent data loss. This fix is available with a new flag --no-hide-partially-staged that is automatically enabled when --no-stash is used.

Patch Changes

• #1362 17bc480 Thanks @​antonk52! - update [email protected]

• #1368 7c55ca9 Thanks @​iiroj! - Update most dependencies

• #1368 777d4e9 Thanks @​iiroj! - To improve performance, only use lilconfig when searching for config files outside the git repo. In the regular case, lint-staged finds the config files from the Git index and loads them directly.

• #1373 85eb0dd Thanks @​iiroj! - When determining git directory, use fs.realpath() only for symlinks. It looks like fs.realpath() changes some Windows mapped network filepaths unexpectedly, causing issues.

v15.1.0

Minor Changes

• #1344 0423311 Thanks @​danielbayley! - Add support for loading configuration from package.yaml and package.yml files, supported by pnpm.

Patch Changes

• #1355 105d901 Thanks @​iiroj! - Suppress some warnings when using the "--quiet" flag

v15.0.2

Patch Changes

• #1339 8e82364 Thanks @​iiroj! - Update dependencies, including [email protected] to fix an upstream issue affecting lint-staged.

v15.0.1

... (truncated)

Changelog

Sourced from lint-staged's changelog.

15.2.4

Patch Changes

• 4f4537a Thanks @​iiroj! - Fix release issue with previous version; update dependencies

15.2.3

Patch Changes

• #1407 d698162 Thanks @​iiroj! - Update dependencies

15.2.2

Patch Changes

• #1391 fdcdad4 Thanks @​iiroj! - Lint-staged no longer tries to load configuration from files that are not checked out. This might happen when using sparse-checkout.

15.2.1

Patch Changes

• #1387 e4023f6 Thanks @​iiroj! - Ignore stdin of spawned commands so that they don't get stuck waiting. Until now, lint-staged has used the default settings to spawn linter commands. This means the stdin of the spawned commands has accepted input, and essentially gotten stuck waiting. Now the stdin is ignored and commands will no longer get stuck. If you relied on this behavior, please open a new issue and describe how; the behavior has not been intended.

15.2.0

Minor Changes

• #1371 f3378be Thanks @​iiroj! - Using the --no-stash flag no longer discards all unstaged changes to partially staged files, which resulted in inadvertent data loss. This fix is available with a new flag --no-hide-partially-staged that is automatically enabled when --no-stash is used.

Patch Changes

• #1362 17bc480 Thanks @​antonk52! - update [email protected]

• #1368 7c55ca9 Thanks @​iiroj! - Update most dependencies

• #1368 777d4e9 Thanks @​iiroj! - To improve performance, only use lilconfig when searching for config files outside the git repo. In the regular case, lint-staged finds the config files from the Git index and loads them directly.

• #1373 85eb0dd Thanks @​iiroj! - When determining git directory, use fs.realpath() only for symlinks. It looks like fs.realpath() changes some Windows mapped network filepaths unexpectedly, causing issues.

15.1.0

Minor Changes

• #1344 0423311 Thanks @​danielbayley! - Add support for loading configuration from package.yaml and package.yml files, supported by pnpm.

Patch Changes

• #1355 105d901 Thanks @​iiroj! - Suppress some warnings when using the "--quiet" flag

... (truncated)

Commits

• 8be6c8e chore(changeset): release (#1419)
• 4f4537a build(husky): fix release issue with Husky
• 95d096d chore(changeset): release (#1411)
• 72483cb docs: fix typo (#1417)
• 86fba6f build(deps): update dependencies (#1418)
• 1353320 test: add e2e test for linting difficult filename with ESLint + Prettier (#1413)
• 28cc901 ci(release): disable Husky hooks in release action
• d698162 build(deps): update dependencies
• ab263ba docs: fix typo (#1408)
• 6a14c53 chore(release): add empty changeset
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[coderabbitai]

Important

Review Skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

---

Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media?

Share

• X
• Mastodon
• Reddit
• LinkedIn

Tips

Chat

There are 3 ways to chat with CodeRabbit:

• Review comments: Directly reply to a review comment made by CodeRabbit. Example:
  • I pushed a fix in commit <commit_id>.
  • Generate unit testing code for this file.
  • Open a follow-up GitHub issue for this discussion.
• Files and specific lines of code (under the "Files changed" tab): Tag @coderabbitai in a new review comment at the desired location with your query. Examples:
  • @coderabbitai generate unit testing code for this file.
  • @coderabbitai modularize this function.
• PR comments: Tag @coderabbitai in a new PR comment to ask questions about the PR branch. For the best results, please provide a very specific query, as very limited context is provided in this mode. Examples:
  • @coderabbitai generate interesting stats about this repository and render them as a table.
  • @coderabbitai show all the console.log statements in this repository.
  • @coderabbitai read src/utils.ts and generate unit testing code.
  • @coderabbitai read the files in the src/scheduler package and generate a class diagram using mermaid and a README in the markdown format.

Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments.

CodeRabbit Commands (invoked as PR comments)

• @coderabbitai pause to pause the reviews on a PR.
• @coderabbitai resume to resume the paused reviews.
• @coderabbitai review to trigger a review. This is useful when automatic reviews are disabled for the repository.
• @coderabbitai resolve resolve all the CodeRabbit review comments.
• @coderabbitai help to get help.

Additionally, you can add @coderabbitai ignore anywhere in the PR description to prevent this PR from being reviewed.

CodeRabbit Configration File (.coderabbit.yaml)

• You can programmatically configure CodeRabbit by adding a .coderabbit.yaml file to the root of your repository.
• Please see the configuration documentation for more information.
• If your editor has YAML language server enabled, you can add the path at the top of this file to enable auto-completion and validation: # yaml-language-server: $schema=https://coderabbit.ai/integrations/schema.v2.json

Documentation and Community

• Visit our Documentation for detailed information on how to use CodeRabbit.
• Join our Discord Community to get help, request features, and share feedback.
• Follow us on X/Twitter for updates and announcements.

[dependabot]

Superseded by #221.