Hydra.nvim

This is the Neovim implementation of the famous Emacs Hydra package.

Description for Poets

Once you summon the Hydra through the prefixed binding (the body + any one head), all heads can be called in succession with only a short extension.

The Hydra is vanquished once Hercules, any binding that isn't the Hydra's head, arrives. Note that Hercules, besides vanquishing the Hydra, will still serve his original purpose, calling his proper command. This makes the Hydra very seamless.

Description for Pragmatics

Imagine you want to change the size of your current window. Vim allows you to do it with <C-w>+, <C-w>-, <C-w><, <C-w>> bindings. So, you have to press <C-w>+<C-w>+<C-w>+<C-w><<C-w><<C-w><... as many times as you need (I know about count prefixes, but I was never fond of them). Hydra allows you to press <C-w> just once and then get access to any <C-w>... bindings without pressing the prefix again: <C-w>+++++--<<<<. Or buffer side scrolling: instead of zlzlzlzlzlzl... press zlllllllllhhhl to freely scroll buffer left and right. Any key other than bind to a hydra will stop hydra state and do what they should.

Hydra also allows assigning a custom hint to such group of keybindings to allows you an easy glance at what you can do.

If you want to quickly understand the concept, you can watch the original Emacs Hydra video demo

• Installation
• Creating a New Hydra
• Config
  • Default Configuration
• Hint
  • Hint Configuration
• Heads
• Colors
  • Amaranth
  • Blue and Teal
  • Pink
• Hooks
  • Meta Accessors
• Public methods
• Highlights
• Keymap Utility Functions
• Statusline
• Limitations
• How it works under the hood

Installation

To install with lazy.nvim use:

{
    "nvimtools/hydra.nvim",
    config = function()
        -- create hydras in here
    end
}

Creating a New Hydra

To create a hydra you need to call Hydra's constructor with a parameters table of the form:

local Hydra = require("hydra")
Hydra({
    -- string? only used in auto-generated hint
    name = "Hydra's name",

    -- string | string[] modes where the hydra exists, same as `vim.keymap.set()` accepts
    mode = "n",

    -- string? key required to activate the hydra, when excluded, you can use
    -- Hydra:activate()
    body = "<leader>o",

    -- these are explained below
    hint = [[ ... ]],
    config = { ... },
    heads = { ... },
})

The more complex fields are described below:

• hint
• config
• heads

Config

With this table, you can set the behavior of the whole hydra.

config = {
    -- see :h hydra-heads
    exit = false, -- set the default exit value for each head in the hydra

    -- decides what to do when a key which doesn't belong to any head is pressed
    --   nil: hydra exits and foreign key behaves normally, as if the hydra wasn't active
    --   "warn": hydra stays active, issues a warning and doesn't run the foreign key
    --   "run": hydra stays active, runs the foreign key
    foreign_keys = nil,

    -- see `:h hydra-colors`
    color = "red", -- "red" | "amaranth" | "teal" | "pink"

    -- define a hydra for the given buffer, pass `true` for current buf
    buffer = nil,

    -- when true, summon the hydra after pressing only the `body` keys. Normally a head is
    -- required
    invoke_on_body = false,

    -- description used for the body keymap when `invoke_on_body` is true
    desc = nil, -- when nil, "[Hydra] .. name" is used

    -- see :h hydra-hooks
    on_enter = nil, -- called when the hydra is activated
    on_exit = nil, -- called before the hydra is deactivated
    on_key = nil, -- called after every hydra head

    -- timeout after which the hydra is automatically disabled. Calling any head
    -- will refresh the timeout
    --   true: timeout set to value of 'timeoutlen' (:h 'timeoutlen')
    --   5000: set to desired number of milliseconds
    timeout = false, -- by default hydras wait forever

    -- see :h hydra-hint-hint-configuration
    hint = false,
}

Default Configuration

The above discusses per-hydra configuration. But Hydra.nvim also allows you to set default values for the config table. These defaults are automatically applied to new hydras, but can still be overridden on a per-hydra basis.

This is useful for setting config that you want to apply to all of your hydras, like common floating window borders, or common hooks.

Only applies to hydras that are created after you call the setup method

require('hydra').setup({
    debug = false,
    exit = false,
    foreign_keys = nil,
    color = "red",
    timeout = false,
    invoke_on_body = false,
    hint = {
        show_name = true,
        position = { "bottom" },
        offset = 0,
        float_opts = { },
    },
    on_enter = nil,
    on_exit = nil,
    on_key = nil,
})

Hint

The hint for a hydra can let you know that it's active, and remind you of the hydra's heads.

The string for the hint is passed directly to the hydra:

Hydra({
    hint = [[ some multiline string ]]
})

By default, a one line hint is generated and displayed in the cmdline. Heads and their descriptions are placed in the order they were passed into the heads table. Heads with { opts = { desc = false }} don't appear in auto-generated hints.

Values in the hint string are parsed with the following rules:

• anything between _ is considered a head, and will be highlighted with the corresponding head color.
• ^ is treated as an empty char and can be used to help align the hint (normally used on lines that don't have as many underscores as lines above or below)
• %{val} is a dynamic value, a function named val is called and its return value inserted into the hint
  • Updated each time a head is called
  • Pass these functions to config.hint.funcs (discussed below)
  • There are built-in functions located here

Heads not in the manually created hint, will be automatically added to the bottom of the hint window, following the same rules as auto-generated hint. You can avoid this with { desc = false }

Hint Configuration

The hint is configured with the hint key on the config table. You can disable the hint by setting this value to false.

Hydra({
    config = {
        -- either a table like below, or `false` to disable the hint
        hint = {
            -- "window" | "cmdline" | "statusline" | "statuslinemanual"
            --   "window": show hint in a floating window
            --   "cmdline": show hint in the echo area
            --   "statusline": show auto-generated hint in the status line
            --   "statuslinemanual": Do not show a hint, but return a custom status
            --                       line hint from require("hydra.statusline").get_hint()
            type = "window", -- defaults to "window" if `hint` is passed to the hydra
                             -- otherwise defaults to "cmdline"

            -- set the position of the hint window. one of:
            --    top-left   |   top    |  top-right
            --  -------------+----------+--------------
            --   middle-left |  middle  | middle-right
            --  -------------+----------+--------------
            --   bottom-left |  bottom  | bottom-right
            position = "bottom",

            -- Offset of the floating window from the nearest editor border
            offset = 0,

            -- options passed to `nvim_open_win()`, see :h nvim_open_win()
            -- Lets you set border, header, footer, etc etc.
            float_opts = {
                -- row, col, height, width, relative, and anchor should not be
                -- overridden
                style = "minimal",
                focusable = false,
                noautocmd = true,
            },

            -- show the hydras name (or "HYDRA:" if not given a name), at the
            -- beginning of an auto-generated hint
            show_name = true,
            
            -- if set to true, this will prevent the hydra's hint window from displaying
            -- immediately.
            -- Note: you can still show the window manually by calling Hydra.hint:show()
            -- and manually close it with Hydra.hint:close()
            hide_on_load = false,

            -- Table from function names to function. Functions should return
            -- a string. These functions can be used in hints with %{func_name}
            -- more in :h hydra-hint
            funcs = {},
        }
    }
})

Heads

Each Hydra's head has the form:

{ head, rhs, opts }

Similar to the vim.keymap.set() function.

The head is the "lhs" of the mapping (given as a string). These are the keys you press to perform the action.

The rhs is the action that gets performed. It can be a string, function or nil. when nil, the action is a no-op.

The opts table is empty by default.

opts = {
    -- "When the hydra hides, this head does not stick out"
    -- Private heads are unreachable outside of the hydra state.
    private = false,

    -- When true, stops the hydra after executing this head
    -- NOTE:
    --   - All exit heads are private
    --   - If no exit head is specified, esc is set by default
    exit = false,

    -- Like exit, but stops the hydra BEFORE executing the command
    exit_before = false,

    -- when set to false, config.on_key isn't run after this head
    ok_key = true,

    -- string | false - value shown in auto-generated hint. When false, this key
    -- doesn't show up in the auto-generated hint
    desc = nil,

    -- same as the builtin map options
    expr = false, -- :h :map-expression
    silent = false, -- :h :map-silent

    -- \/ For Pink Hydras only \/ --

    -- allows binding a key which will immediately perform its action and not wait
    -- `timeoutlen` for a possible continuation
    nowait = false,

    -- Override `mode` for this head
    mode = "n",
}

Colors

The color option is a shortcut for determining the exit and foreign_keys options. It sets them in the following way:

color	values
red
blue	exit = true
amaranth	foreign_keys = 'warn'
teal	foreign_keys = 'warn', exit = true
pink	foreign_keys = 'run'

Note

The exit and foreign_keys options are higher priority than the color option and can't be overridden by it. I.e, if manually set values of exit and foreign_keys contradict the color value, then the color value is ignored

Colors are also used to highlight heads in the hint, so you know how they will behave.

Each hydra head has a basic associated color, red or blue, that determines whether or not the hydra will continue after the head is called:

• reddish head will execute the command and continue the state
• blueish head will execute the command and stop the state

The hydra body can be one of five variants of the basic colors: amaranth, teal, pink, red, blue. They (according to basic color) determine the default behavior of all the heads; and determine what happens when a foreign key is pressed. The following table summarizes the effects of the different colors.

Body Color	Basic color	Executing NON-HEAD	Executing HEAD
amaranth	red	Disallow and Continue	Continue
teal	blue	Disallow and Continue	Quit
pink	red	Allow and Continue	Continue
red	red	Allow and Quit	Continue
blue	blue	Allow and Quit	Quit

Amaranth

The amaranth color wasn't chosen at random just because it is a variation of the color red. There is some lore — according to Wikipedia:

The word amaranth comes from the Greek word amaranton, meaning "unwilting" (from the verb marainesthai, meaning "wilt"). The word was applied to amaranth because it did not soon fade and so symbolized immortality.

Hydras with amaranth body are impossible to quit with any binding except a blue head.

Blue and Teal

A blue hydra has little sense in Vim since it works exactly like standard Vim multi-key keybinding with addition you can add a custom hint to it.

A teal hydra works the same way, except it blocks all keys which are not hydra heads, which can be useful.

Pink

Pink hydra is of a different nature. It is a key-layer inside, so all keys except overwritten are work as usual. Even [count] prefixes.

Hooks

There are three hooks currently, on_enter, on_exit, and on_key. These fire when you'd expect, and they're set on a per hydra basis. The on_enter function is called in such a way that gives you access to meta-accessors.

Meta Accessors

Inside a function passed as on_enter, the vim.o, vim.go, vim.bo and vim.wo meta-accessors are redefined to work the way you think they should. If you want some option value to be temporary changed while Hydra is active, you need just set it with one of the meta-accessors in the on_enter function... and that's it. No need to set it back in on_exit function.

config = {
    on_enter = function()
       print('Hydra enter')
       vim.bo.modifiable = false -- temporarily set `nomodifiable` while Hydra is active
    end,
    on_exit = function()
       print('Hydra exit')
       -- No need to set modifiable back here
    end
}

Public methods

• Hydra:activate() — activate the hydra programmatically
• Hydra:exit() — exit the hydra if it is active

Highlights

Hydra defines these highlight groups with their defaults colors:

• HydraRed — fg = #FF5733

• HydraBlue — fg = #5EBCF6

• HydraAmaranth — fg = #ff1757

• HydraTeal — fg = #00a1a1

• HydraPink — fg = #ff55de

• HydraHint — linked to NormalFloat, defines the fore- and background of the hint window;

• HydraBorder — linked to FloatBorder, defines the fore- and background of the border.

• HydraTitle — linked to FloatTitle, hl for the window title

• HydraFooter — linked to FloatFooter, hl for the window footer (only in nvim 0.10.0+)

Keymap Utility Functions

Utility functions to use in keymaps, required with require("hydra.keymap-util")

• cmd(command)

  Get a string and wrap it in <Cmd>, <CR>

  cmd("vsplit") == "<Cmd>vsplit<CR>"

• pcmd(try_cmd, catch?, catch_cmd?)

  Protected cmd. Examples explain better:

  pcmd("wincmd k", "E11", "close")
  ->  "<Cmd>try | wincmd k | catch /^Vim\%((\a\+)\)\=:E11:/ | close | endtry<CR>"
  
  pcmd("wincmd k", nil, "close")
  ->  "<Cmd>try | wincmd k | catch | close | endtry<CR>"
  
  pcmd("close")
  ->  "<Cmd>try | close | catch | endtry<CR>"
  

  See: :help exception-handling

  params:

  • try_cmd : string
  • catch : string (optional) — String of the form E + some digits, like E12 or E444.
  • catch_cmd : string (optional)

  return: string

Statusline

In the statusline module require('hydra.statusline') there are functions that can help you to integrate Hydra in your statusline:

• is_active() — returns true if there is an active hydra;
• get_name() — get the name of an active hydra if it has it;
• get_color() — get the color of an active hydra;
• get_hint() — get an active hydra's statusline hint. Return not nil only when config.hint is set to false or when config.hint.type == "statuslinemanual"

Limitations

[count] is not supported in a red, amaranth and teal hydras (see :help count). But supported in pink hydra since it is a layer.

How it works under the hood

You can read about the internal mechanics in CONTRIBUTING.md

Thanks

• anuvyklack for creating the original hydra.nvim that this is forked from
• The original Emacs hydra, for the concept this is based on