SynchroniCity - Data Model Mapper

1. Introduction

The Data Model Mapper tool enables to convert several file types (e.g. CSV, Json, GeoJson) to the different Data Models defined in the SynchroniCity Project. The files in input can contain either rows, JSON objects or GeoJson Features, each of them representing an object to be mapped to an NGSI entity, according to the selected Data Model.

In particular, it performs following steps:

Parsing:
- Parse input file, by converting it into a row/object stream.
Streaming:
- Each row/object coming from the stream is converted to an intermediate object.
Mapping:
- By using the input JSON Map, convert the intermediate object to an NGSI entity, according to a specific target Data Model.
Validation and report:
- Validate resulting object against the JSON schema corresponding to a target Data Model. It leverages AJV JSON Schema Validator.
- Produce a report file with validated and unvalidated objects.

Writing: Orion CB or File
- Validated objects are sent to the configured Orion Context Broker and/or to a local file.

The tool is developed in Node.js and can be started as a command line tool. Soon it will be possible to start it as a REST server

2. Installation

Prerequisites

The tool requires NodeJS version >= 8.11 to be installed.

Tool Installation

Go to the root folder and type following command:

npm install

After configuring the tool correctly (conf file or cli arguments), start with:

node mapper

If you have selected the Command Line mode append to the previous command the appropriate arguments (as described in Configuration section).

3. Configuration

The configuration of the Data Model Mapper consists of the following steps:

Application (optional, left intact to use defaults)
Input (mandatory)
ID Pattern (mandatory)
Rows Range (optional)
Writers (mandatory)

IMPORTANT The tool takes its default configuration from the config.js file, but following configurations will be overriden if the corresponding parameters are provided as Command Line arguments or in the HTTP request, depending on which running mode was selected for the tool:

Input
ID Pattern
Rows Range
Writers

3.1 Configuration - Application

The global setup is defined in the config.js file

Rename the config.template.js file to config.js and modify accordingly to the following options:
- env: the execution environment. Accepted values are:
  - debug: the logs are written in the /logs folder.
  - production: the logs are displayed in the console output.
- logLevel: logging level for WINSTON. Valid values are the followings:
  - error, warn, info, verbose, debug, silly
- writers: The names of Writers, the handlers for writing the resulting mapped NGSI entities to different outputs. Accepted values (one or more) are:
  - orionWriter: To write NGSI entities directly to a specified Orion Context Broker.
  - fileWriter: To write NGSI entities locally to a specified file.

3.2 Configuration - Input

In order to perform the mapping process, the tool takes three inputs:
1. Source: The path of the source file containing data to be mapped (CSV, JSON or GeoJson).
2. Map, specifying the mapping between source fields and destrination fields. It is a JSON , where the key-value pairs represent the mapping for each row contained in the source file.
3. Target Data Model: the name of the target SynchroniCity Data Model.

These three inputs, can be specified either in the config.js file, as CLI arguments or in the HTTP request (depending on running mode). Following sections describe each option.

3.2.1 Inputs configuration in config file

In order to set Input configuration as config file parameters, modify the following fields of the config.js file:

sourceDataPath : The path of the source file. If it is a Windows path, it MUST be with double backslashes (e.g. C:\\Users\\....).
mapPath: The path of JSON Map, MUST be with .json extension. (See following Mapping Guide section)
targetDataModel: The name of target Data Model (must match with those contained in the /dataModels folder).

Example:

sourceDataPath: "path/to/sourcefile.csv"

3.2.2 Inputs configuration as CLI arguments

In order to use inputs configuration as CLI arguments, append following arguments to the node mapper command:

-s, --sourceDataPath
-m, --mapPath
-d, --targetDataModel

Example:

node mapper -s "path/to/sourcefile.csv" -m "path/to/mapFile.json -d "WeatherObserved"

Note Previous CLI arguments, if provided, will override the default ones specified in config.js file.

3.2.3 Inputs configuration in the HTTP request

Soon available

3.3 Configuration - Id Pattern

Following configurations are relative to fields that will compose the generated IDs of mapped entities, according to the SynchroniCity’s Entity ID Recommendation.

Note Id Pattern fields can be specified either in the config.js file, as CLI arguments or in the HTTP request (depending on running mode).

3.3.1 Id Pattern configuration in config file

In order to set Id Pattern configuration as config file parameters, modify the following fields of the config.js file:

site: can represent a RZ, City or area that includes several different IoT deployments, services or apps (e.g., Porto, Milano, Santander, Aarhus, Andorra …).
service: represents a smart city service/application domain for example parking, garbage, environmental etc.
group: This could be optional. The group part can be used for grouping assets under the same service and/or provider (so it can be used to identify different IoT providers). It is responsibility of OS sites to maintain proper group keys.

The Entity Name (last part of ID pattern), is generated either automatically or by specifying it in the dedicated field entitySourceId of the JSON Map, as described in the Mapping Guide section.

3.3.2 Id pattern configuration as CLI arguments

In order to use inputs configuration as CLI arguments, append following arguments to the node mapper command:

--si, --site
--se, --service
--gr, --group

Note Previous CLI arguments, if provided, will override the default ones specified in config.js file.

3.3.3 Id pattern configuration in the HTTP request

Soon available

To summarize, the ID of the mapped entity will be composed by:

urn:ngsi-ld, statically added.
entity-type, the Target Data Model name, as specified in Input Configuration step .
site, service, group, whose values defined as described previously.
entityName: as specified either in the entitySourceId field of JSON Map or automatically generated.

3.4 Configuration - Rows Range

Following configuration are relative to the rows range (start, end) of the input file that will be mapped. It is useful when you want to map only a part of the input file; in case of huge files, it is recommended (in order to easily inspect mapping and writing reports), to use a "paginated mapping", where consecutive and relatively small (2000/5000) rows ranges of the input file are used.

Note Rows range can be specified either in the config.js file, as CLI arguments or in the HTTP request (depending on running mode).

3.4.1 Rows Range configuration in config file

In order to set Rows Range configuration as config file parameters, modify the following fields of the config.js file:

rowStart: Row of the input file from which the mapper will start to map objects (Allowed values are integers >= 0).
rowEnd : Last Row of the input file that will be mapped (Allowed values are integers > 0 or Infinity value, indicating "until the end of file").

3.4.2 Rows Range configuration as CLI arguments

In order to use Row Range configuration as CLI arguments, append following arguments to the node mapper command:

--rs, --rowStart
--re, --rowEnd

Note. Previous Command Line arguments, if provided, will override the default ones specified in config.js file.

3.4.3 Rows Range configuration in the HTTP request

Soon available

3.5 Configuration - Writers

The Writers handlers are responsible of writing the resulting mapped NGSI entities to different outputs. The current available writers are:

orionWriter: To write NGSI entities directly to a specified Orion Context Broker.
fileWriter: To write NGSI entities locally to a specified file.

3.5.1 Configuration - Orion Writer

The Orion Writer will try to create a new entity, by sending a POST to /v2/entities endpoint of the provided Context Broker URL. In case of already existing entity, unless the skipExisting parameter is set to true, it tries to update the entity, by sending a POST to /v2/entities/{existingId}/attrs endpoint. It is able also to send requests behind an HTTP proxy (see below).

Note Orion Writer URL can be specified either in the config.js file, as CLI arguments or in the HTTP request (depending on running mode).

Orion configuration in configuration file

Modify the following properties in config.orionWriter object contained in the config.js file:

orionUrl: The Base URL (without /v2...), of the Orion Context Broker where to write.
enableProxy: (true|false) Enables the write to send requests through a proxy.
proxy: Proxy URL in the form http://user:pwd@proxyHost:proxyPort .
skipExisting: (true|false) Skip mapped entities (same ID) already existing in the CB, otherwise try to update them

To send entities to a secured Context Broker, modify following properties:

orionAuthHeaderName : The name of Authentication Header (e.g. "Authorization").
orionAuthToken: : The value of Authentication Header (e.g Bearer XXXX ).

Orion configuration as CLI arguments

In order to use Orion Writer configuration as CLI arguments, when launching the tool with node mapper command, append following argument:

-u, --orionUrl: The Base Url (without /v2…), of Orion Context Broker.

Note Previous Command Line arguments, if provided, will override the default ones specified in config.js file.

Orion configuration in the HTTP request

Soon available

3.5.2 Configuration - File Writer

The File Writer will write each mapped NGSI Object inside a JSON Array, stored locally in a file. It is useful when the tool is used in Comman Line mode; in the Server Mode there will be a dedicated API to download the resulting file.

File Writer configuration in configuration file

Modify the following properties in config.fileWriter object contained in the config.js file:

filePath: The full path, icnluding the extension of where to store locally the resulting file.
addBlankLine: (true|false) Put a carriage return between resulting objects in the file.

File Writer configuration as CLI arguments

In order to use File Writer configuration as CLI arguments, when launching the tool with node mapper command, append following argument:

-f, --outFilePath: The full path, icnluding the extension of where to store locally the resulting file.

Note Previous Command Line arguments, if provided, will override the default ones specified in config.js file.

File Writer configuration in the HTTP request

Soon available

4. Mapping Guide

This section describes, with examples, how to compile the JSON Map file, whose path must be specified as input configuration, as described in Inputs Configuration section.

4.1 Source Input File

IMPORTANT The source file must be CSV, Json or GeoJson and MUST BE in UTF8 encoding. If the source file has another encoding (e.g. ANSI), please first convert it to UTF8 encoding (e.g. by using conversion with NotePad++).

Depending on input source type, the tool behaves accordingly:

CSV The tool extracts the columns from the first row, and for each next row creates an intermediate data object (JSON), where each key-value field will have the CSV column as key and the specific CSV row value as value. In this way, every intermediate object coming from a CSV row will be mapped in a NGSI entity.
JSON The input file must be already in the "intermediate" form, that is a JSON Array, where each object contains key-value fields to be mapped directly to a NGSI entity.

GeoJSON The file must be a Feature Collection. So, the file must be in the form:

 {
  "type": "FeatureCollection",
  "features": [
     {
        "type": "Feature",
        "geometry": {...},
        "properties": {...}
     },
     ........
  ]}

4.2 Mapping

The tool needs the Mapping JSON, in order to know how to map each source field of the parsed row/object in the destination fields. The map MUST be a well formed JSON and have .json extension.

What is the Map?

The Map consists of a JSON, that is a collection of KEY-VALUE pairs, where, for each pair:

the KEY is the DESTINATION field, belonging to a target Data Model (e.g. address or totalSlotNumber for BikeHireDockingStation).
the VALUE is the selector that represents the SOURCE field/column, belonging to the source object/row.
If the KEY has the reserved name entitySourceId, its VALUE will represent the source field from which the EntityName part of ID will be taken, according to SynchroniCity Entity ID Recommendation (See Id Pattern Configuration section).

EXAMPLE - KEY-VALUE pair

{ ...

"totalSlotNumber" : "sourceFieldName"
//   KEY            |    VALUE 
// DESTINATION      |    SOURCE          

... }

NOTE the SOURCE value (whose field is represented in the example by the VALUE "sourceFieldName") will be mapped to the DESTINATION field (represented by the KEY "totalSlotNumber")

Which value types from the source fields are supported?

The VALUE of a mapping KEY-VALUE pair is the SOURCE field name. The values, grabbed from these source fields/columns represented by the VALUE selectors, can have one of the following types:

Single value: String, Number, Boolean (for CSV files is the unique option)
Multiple value: A String, Number or Boolean array
Nested value: A String, Number or Boolean in a field nested inside an object

Depending on the types of source and destination fields, the VALUE selector of the mapping pair can be one of the followings:

String:
- The SOURCE field has a simple (String, Number or Boolean) value, example:
```
//NOTE. This is the SOURCE file, not the mapping pair.
"sourceFieldName": "15"
```
  - The relative KEY-VALUE PAIR will be:
```
"totalSlotNumber" : "sourceFieldName"
```
  - The result of the mapping will be:
```
"totalSlotNumber" : 15
```
- The SOURCE field is a "nested field", and MUST be specified in the VALUE selector with dot notation (specifically used in case of JSON/GeoJson inputs, as the following), example:
```
//Note that this is the SOURCE file, not the mapping pair.
"sourceAddress":{
         "sourceStreetName" : "Example Avenue"
}
```
  - The relative KEY-VALUE pair will be:
```
"destinationStreetName" : "sourceAddress.sourceStreetName"
```
  - The result of the mapping will be:
```
"destinationStreetName" : "Example Avenue"
```
- If you want as value of the DESTINATION field a specific "static" value instead of the one coming from a SOURCE field, the VALUE selector must be specified as static: (e.g. static: something), the following substring (something), will represent the ACTUAL VALUE of the resulting field. This is a way for specifying custom values that are not present as field values in the SOURCE object/row.
String Array: If the VALUE selector is a string array, each string represents a SOURCE field (or the actual value if in the static: form). Their values will be concatenated (with spaces as separator) and mapped to the corresponding DESTINATION field (represented by the KEY in the mapping pair).
Object: One or more source fields will be mapped to a structured/nested DESTINATION field. In this case, we have a KEY-OBJECT pair, where each SUBKEY has its own VALUE, example:
```
"destinationAddress" : {
    "destinationStreetName" : "sourceStreetName"
 }
```
or if also the SOURCE field is a "nested field" (as previous case, MUST use dot notation):
```
"destinationAddress" : {
 "destinationStreetName" : "sourceAddress.sourceStreetName"
}
```
- The result of the mapping will be:
```
"destinationAddress" : {
     "destinationStreetName" : "Example Avenue"
}
```

Note Following examples omit mandatory fields for mapped NGSI entities, such as "id" and "type". These are automatically included by the tool.

4.2.1 Mapping Examples

CSV Example

We have as input a CSV file, representing Bike Sharing stations. We want to map each CSV row to an entity of the target Data Model BikeHireDockingStation.

The first row contains the columns definitions:

Location;Area;SubArea;Name;AvailableSlots;TotalSlots;

The second line, the first one representing a mappable source object is:

Alemagna Avenue;Museum;Triennale di Milano;10;40;

The resulting Map, according to the target Data Model, will be:

{
   "address": {
      "streetAddress": "Location"
   },
   "areaServed": "Area",
   "totalSlotNumber": "TotalSlots"
}

Note that the "address" destination field, is a structured object, containing the DESTINATION field streetAddress, which is mapped to the SOURCE field Location. So the corresponding value "Alemagna Avenue" will be mapped as the value of the streetAddress. The resulting object will be:

{
   "address": {
      "streetAddress": "Alemagna Avenue"
   },
   "areaServed": "Museum",
   "totalSlotNumber": 40
}

Alternatively, we would instead concatenate both Area and SubArea SOURCE fields to the DESTINATION areaServed field. In that case the Map will be:

{
   "address": {
      "streetAddress": "Location"
   },
   "areaServed": [
      "Area",
      "SubArea"
   ],
   "totalSlotNumber": "TotalSlots"
}

The resulting object will be:

{
  "address": {
     "streetAddress": "Alemagna Avenue"
  },
  "areaServed": "Museum - Triennale di Milano",
  "totalSlotNumber": 40
}

Finally, if we want to specify DIRECTLY a static custom value for a resulting mapped field, the VALUE selector of the KEY- VALUE mapping pair will have the static: prefix. The Map will be:

{
   "address": {
      "streetAddress": "Location"
   },
   "areaServed": [
      "Area",
      "SubArea"
   ],
   "totalSlotNumber": "TotalSlots",
   "name": [
      "static:Racks - ",
      "Location"
   ]
}

In this case we are concatenating, for target "name" field, two values:

"Rastrelliere " literally
The value contained in the source field "Location"

The resulting object will be:

{
  "address": {
     "streetAddress": "Alemagna Avenue"
  },
  "areaServed": "Museum - Triennale di Milano",
  "totalSlotNumber": 40,
  "name": "Racks - Alemagna Avenue"
}

GeoJson Example

We have as input a GeoJson file, containing a Feature Collection and representing Bike Sharing stations. We want to map each Feature as an entity of the target Data Model BikeHireDockingStation.

For instance, for the feature:

{
   "type": "Feature",
   "geometry": {
      "type": "Point",
      "coordinates": [
         9.189043,
         45.464725
      ]
   },
   "properties": {
      "ID": 1,
      "BIKE_SH": "001 Duomo 1",
      "INDIRIZZO": "P.za Duomo",
      "ANNO": 2008,
      "STALLI": 24,
      "LOCALIZ": "Carreggiata"
   }
}

The resulting JSON Map, according to the Target Data Model, will be:

{
   "name": "properties.BIKE_SH",
   "location": "geometry",
   "totalSlotNumber": "properties.STALLI",
   "entitySourceId": "properties.BIKE_SH",
   "address": {
      "streetAddress": "properties.INDIRIZZO"
   }
}

In this case, nested source fields can be accessed through the dot notation.

NOTE the DESTINATION location field is treated in a special way: the whole SOURCE field value will be taken and put in the resulting location field.

The final resulting object will be:

{
   "id": "urn:ngsi-ld:BikeHireDockingStation:site:service:group:entityName",
   "name": "001 Duomo 1",
   "location": {
      "type": "Point",
      "coordinates": [
         9.189043,
         45.464725
      ]
   },
   "address": {
      "streetAddress": "P.za Duomo"
   },
   "totalSlotNumber": 24
}

The ID is be composed by:

urn:ngsi-ld, statically added.
entity-type, target Data Model, as specified in Input Configuration step .
site, service, group, whose values was defined in ID Pattern Configuration step.
entityName: as specified either in the entitySourceId field of JSON Map or automatically generated.

5. Logging

The tool will collect several types of logging messages.

Application Log: in /logs folder, .out and .error daily files. Logs messages, according to the Log Level set in the Application Configuration part.
Validation Report: in /reports/validation folder, file with messages about mapped objects that passed or not the validation against target Data Model Schema.
Orion Report: in /reports/orion/ folder, file with messages about validated mapped objects that was written/not written in the Orion Context Broker, whose url was defined in the Orion Writer Configuration part.

6. License

The Data Model Mapper tool is licensed under Affero General Public License (GPL) version 3. This program is free software: you can redistribute it and/or modify it under the terms of the GNU Affero General Public License as published by the Free Software Foundation, either version 3 of the License, or at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License along with this program. If not, see http://www.gnu.org/licenses/.

Name		Name	Last commit message	Last commit date
Latest commit History 37 Commits
dataModels		dataModels
examples		examples
src		src
uploads		uploads
.gitignore		.gitignore
DataModelMapper.njsproj		DataModelMapper.njsproj
LICENSE		LICENSE
README.md		README.md
config.template.js		config.template.js
mapper.js		mapper.js
package-lock.json		package-lock.json
package.json		package.json

License

BeOpen-project/data-model-mapper

Folders and files

Latest commit

History

Repository files navigation

SynchroniCity - Data Model Mapper

Table of Contents

1. Introduction

2. Installation

Prerequisites

Tool Installation

3. Configuration

3.1 Configuration - Application

3.2 Configuration - Input

3.2.1 Inputs configuration in config file

3.2.2 Inputs configuration as CLI arguments

3.2.3 Inputs configuration in the HTTP request

3.3 Configuration - Id Pattern

3.3.1 Id Pattern configuration in config file

3.3.2 Id pattern configuration as CLI arguments

3.3.3 Id pattern configuration in the HTTP request

3.4 Configuration - Rows Range

3.4.1 Rows Range configuration in config file

3.4.2 Rows Range configuration as CLI arguments

3.4.3 Rows Range configuration in the HTTP request

3.5 Configuration - Writers

3.5.1 Configuration - Orion Writer

Orion configuration in configuration file

Orion configuration as CLI arguments

Orion configuration in the HTTP request

3.5.2 Configuration - File Writer

File Writer configuration in configuration file

File Writer configuration as CLI arguments

File Writer configuration in the HTTP request

4. Mapping Guide

4.1 Source Input File

4.2 Mapping

What is the Map?

Which value types from the source fields are supported?

4.2.1 Mapping Examples

CSV Example

GeoJson Example

5. Logging

6. License

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages