Skip to content

Latest commit

 

History

History
60 lines (41 loc) · 2.35 KB

Configuration.md

File metadata and controls

60 lines (41 loc) · 2.35 KB
Raw

Configuration

You can compile a core according to a new configuration, Rift2GoCfg is an example for Minimal area configuration.

usage

All available configurations can be found at Parameter.scala

  • hasFpu: Whether the FPU is instanced, or whether RV64FD is supported

  • hasPreFetch: Whether a real PreFetcher is instanced

  • isMinArea: Try our best to reduce the area, the entries of most of the buff, queue, FIFO will reduce to minimal

  • isLowPower: If isLowPower is set to true, the bits of DecoupleIO will be forced to 0.U instead of DontCare when valid is false.B

  • rnChn: How many channels for renaming

  • cmChn: How many channels for committing

  • opChn: How many channels for reading operators

  • wbChn: How many channels for writing-back results

  • xRegNum: The number of physical register files of XPU, should be larger than 32 for renaming

  • fRegNum: The number of physical register files of FPU, should be larger than 32 for renaming

  • vRegNum: The number of physical register files ov VPU, should be larger than 32 for renaming

  • pmpNum: The number of physical memory protection groups

  • hpmNum: The number of performance monitor registers

  • l1BeatBits: The data Width of L1 Bus

  • memBeatBits: The data Width of L2 Memory Port

  • vlen: The length of virtual address

  • plen: The length of physical address

  • tlbEntry: The number of tlb entries

  • uBTB_entry: The number of uBTB entries

  • uBTB_tag_w: The bits width of uBTB tags

  • btb_cl: The number of BTB cache lines

  • bim_cl: The number of BIM cache lines

  • ras_dp: The depth of RAS

  • tage_table: The number of TAGE tables (Do not support now)

  • dw: The data width of I/D Cache

  • bk: The number of Bank of I/D Cache

  • cb: The number of Cache Block of I/D Cache

  • cl: The number of Cache Line of I/D Cache

  • sbEntry: The number of ScoreBoarc Entries of DCache

  • stEntry: The number of StoreQueue Entries of DCache

Attention

The configurations are not fully tested.

  • Compile, test, and report the bugs
  • Use the NormalCfg for full feature
  • Use the Rift2GoCfg for minimal area