>> 3D animation
godel(Scan and Plan): https://github.com/ros-industrial-consortium/godelensenso_driver: https://github.com/ensenso/ros_driver (funded)
pilz_robots: https://github.com/PilzDE/pilz_robotspilz_industrial_motion: https://github.com/PilzDE/pilz_industrial_motion (
# Install Ensenso SDK (from https://www.ensenso.com/support/sdk-download) by:
wget -q https://download.ensenso.com/s/ensensosdk/download?files=ensenso-sdk-2.2.65-x64.deb -O /tmp/ensenso.deb && dpkg -i /tmp/ensenso.deb
# Create a new ROS workspace
mkdir -p ~/snp_demo_ws/src && cd ~/snp_demo_ws/src
# Download demo repository
git clone https://github.com/rosin-project/automatica18_scan_and_plan_demo.git
# Download dependencies
wstool init .
wstool merge ~/snp_demo_ws/src/automatica18_scan_and_plan_demo/snp_prbt.rosinstall
wstool up
# Reset ROS_PACKAGE_PATH
source /opt/ros/kinetic/setup.bash
# Install dependencies
rosdep update && rosdep install --from-paths ~/snp_demo_ws/src --ignore-src --skip-keys="pilz_modbus pilz_sto_modbus_adapter prbt_pg70_support"
# Build workspace
cd ~/snp_demo_ws && catkin build
# Source workspace
source ~/snp_demo_ws/devel/setup.bash
# Simulation:
roslaunch snp_prbt_bringup application_bringup.launch
# Info: Make sure to press play in Gazebo
# Real robot:
roslaunch snp_prbt_bringup application_bringup.launch sim_robot:=false
# Info: Real robot requires pilz_modbus and pilz_sto_modbus_adapter
Make sure to clear possible local godel_robot_scan_parameters since they would overwrite the ones of this repo (snp_prbt_bringup/config/robot_scan.yaml).
rm -f ~/.ros/godel_robot_scan_parameters.msgwget -q https://download.ensenso.com/s/idsdrivers/download?files=uEye_4.90.0_Linux_64.tgz -O /tmp/ueye.tgz
tar -xvzf /tmp/ueye.tgz -C /tmp
sudo /tmp/ueyesdk-setup-4.90-eth-amd64.gz.run
Add in /etc/network/interfaces the following config for the socketcan_interface.
allow-hotplug can0
iface can0 can static
bitrate 1000000
up ip link set $IFACE txqueuelen 15