Skip to content
This repository has been archived by the owner on Oct 22, 2024. It is now read-only.

Latest commit

 

History

History
187 lines (135 loc) · 7.62 KB

README.md

File metadata and controls

187 lines (135 loc) · 7.62 KB
Raw

HULA hoop

Implementation of the HULA algorithm.

Requirements

  • bvm2
  • mininet
  • p4 16 compiler
  • PI

Building and running

  • Generate topology using topology-generation/fattree.py script or use the default one.
  • Run make and wait for mininet to start up.
  • Run ./controller.py to configure the data plane.

The switches are now configured, however, at this point, the hosts don't have routes to hosts not on their rack. To establish a route to a host hn:

  • Run xterm hn from mininet CLI.
  • In the terminal, run ./test-scripts/probe.py. This script sends probes from the current host every 1s.

This will send a probe from hn to every other node and establish a path to hn from every other node. It will also establish a path to every other host connected the same ToR as hn. Repeat this for all node to establish a connection to them.

Use the ./test-scripts/receieve and ./test-script/send script to view incoming packets and send packets to other hosts respectively.

Implementation details

Topology Generation

Since Fat tree topologies are commonly used in datacenters, the paper uses them for evaluation. However, HULA doesn't require any specific topology to work correctly. For this project, any topology with a notion of upstream and downstream links will be sufficient.

The project assumes the following naming scheme to distinguish upstream and downstream links: A switch in the nth tier has the form sm where 100 * n < m < 100 * (n + 1).

Multicast Implementation

The paper implements a smart form of multicast for probe replication that uses a notion of upstream and downstream links. The smart multicast implementation uses the aforementioned naming convention.

At the p4 level, the implementation uses simple_switch_CLI to program each switch by generating configuration commands for each switch in config/. The pseudocode for the smart multicast is:

if packet from downstream link:
    replicate on all links except ingress
else:
    replicate only on downstream links

which is computed into simple multicast groups. The controller creates a mapping from ingress_port to multicast group where each multicast group does the right thing.

Note: The implementation of multicast groups in here does not leverage the probe optimization from the paper (Section 4.5).

Note: There is also code in util to send the correct messages to the software switch, however, bmv doesn't completely implement message to the Packet Replication Engine (PRE) (see this).

Probe packets

Probe packets are the main component of the HULA protocol. A probe packet originates from a src ToR switch and gets replicated throughout the network. The path utilization and the hop information from the probe is used to configure the best hop to get to the ToR where the probe originated.

The probe packet contains two headers: dst_tor and path_util. The parsing and deparsing parts of the code are trivial for the new headers.

Destination ToR mapping

The forwarding tables need to know the ToR ID associated with each switch in order to implement forwarding. Namely, it makes two decisions based on this infrormation:

  1. If a data packet has reached its required ToR, forward to the rack switch.
  2. If not, use the destination ToR to find the next best hop.

In the implementation, this infromation is stored in two metadata fields: self_id and dst_tor. The control plane configures get_dst_tor table to correctly extract this information for all switches.

Link utilization

Hula requires a notions of link utilization associated with each incoming port on a switch. The link utilization is computed by the update_ingress_statistics action using the formula u = pk_l + u * (1 - dt/t) where pk_l is the size of the packet, dt is the time since last update, and t is a constant.

Evaluation

Coping with link failures

We'll be working with h1, h2, and the switches that connect. If you'd like to use a different pair of hosts, take a look at ./topology-generation/foo.png to figure out which switches connect them.

  • Run make and wait for mininet to start up.
  • Run ./controller.py to configure the multicast groups and tables.
  • Run link s104 s211 down and link s104 c210 down in mininet CLI. This removes all paths from h1 to h10.
  • Run xterm h1 h10 h10 in mininet CLI to create one terminal for h1 and two for h10.
  • In the first h10 run ./test-scripts/probe.py to start sending probes from h10.
  • In the second h10 instance, run ./test-scripts/receive.py to display incoming packets.
  • In the h1 terminal, run the following to continously send packets to h10. With the current setup, none of the packets will reach h10.
./test-scripts/send.py 10.0.104.10 "h1" -1
  • Now run link s104 s211 up in the mininet CLI to bring up the link. There is now a path from h1 to h10.
  • After a short delay, note that packet from h1 have started arriving to h10. The HULA probes have detected and coped with link failures!

Port utilization

To evaluate the port utilization of each switch under load, I wrote the benchmark.py script which snapshots the state of various registers on each switch at runtime.

Initial Setup

For this evaluation I ended up creating a synthetic load to test the port utilization. To reproduce, follow these steps:

  • Run make followed by ./controller.py to setup the network.
  • On hosts h1, h3, h5, h7, h9, h11, h13, h15, run ./test-scripts/probe.py & to start sending probes.
  • Run ./test-scripts/send.py 10.0.104.9 'message' on hosts h1, h3, h5, h7, and, h11.

A more realistic load balancing test could be created using one of the datacenter TCP dumps. However, due to time constraints, I was not able to look into this.

JSON data

For benchmarking, I collected 60 snapshots of the network state at an interval of 0.5 seconds. The collected data is in data/data.json. Each snapshot contains the current state of the best_hops register and the port_util register.

Evaluate

The HULA paper generated multiple graphs to compare the load balancing characteristics of the alogrithm with ECMP and CONGA scheme. For my evaluation, we I generated a visualization of the best path from two hosts (h1 and h5) to h9. As the visualization shows, the load balancing scheme switches to paths with lower link utilization under load.

GIF of network state

Experience with P4

  • The semantics of what variables are shared between the controls is not always clear from the program. For example, if I define an array in the ingress control, will it carry state across different invocations of the ingress? What makes registers unique to allow them to carry the state across invocations? This is what Andy Fingerhut from the p4 slack had to say:

    P4_16 header stack syntax looks like an array, and in many ways is, but
only for arrays of values of some header type, and they do not preserve
their value after finishing processing one packet.  Like other header
types, their value disappears after a packet is finished processing

  • No conditionals allowed in table actions. Needed to manually turn the code straightline. Painful.

Code sources

  • Built upon the skeleton code from homework03 for CS6114 fall 18, by Nate Foster, Cornell University.
  • Fat tree topology generation code taken from the Frenetic repository.