1wire temperature sensor

[rjcorwin]

• different ways to hook these up up to R-Pi
• 1wire USB Adapter from PCSensor.com

[chrowe]

I have a couple of these running directly off the GPIO on a pi
http://www.adafruit.com/products/374

These are the links I have in my notes but not sure which one/s I ended up using.

• https://github.com/rhiller/pi-thermometer
• http://www.raspberrypi-spy.co.uk/2013/03/raspberry-pi-1-wire-digital-thermometer-sensor/
• http://www.danielhansen.net/2013/03/raspberry-pi-temperature-logging-using.html
• http://www.theturtlepi.com/code/
• http://www.raspberrypi.org/forums/viewtopic.php?t=35508&p=300363

I can share the script when I get home

Also, for some examples of non temperature sensors see

• http://welserver.com/store.htm
• http://www.hw-group.com/products/sensors/index_en.html

[chrowe]

Here is an example I had running for a while https://gist.github.com/chrowe/905a53060ec08882a9bb

Also just ran across http://www.dreamgreenhouse.com/designs/automation/1wire/index.php which seems to have some good concrete suggestions.

[chrowe]

I am starting to mess around with this and trying things based on
https://github.com/openpipekit/opk-temper1-cli
https://github.com/timofurrer/w1thermsensor
https://learn.adafruit.com/downloads/pdf/adafruits-raspberry-pi-lesson-11-ds18b20-temperature-sensing.pdf

My work is in https://github.com/chrowe/opk-1-wire-cli

[chrowe]

Ok, its basically working. You have to manually add one of the sensor addresses to the pull driver for now.

[chrowe]

This could probably be cleaned up but it is now working with both sensor path and temperature scale as arguments