Deploying Prow

This document will walk you through deploying your own Prow instance to a new Kubernetes cluster. If you encounter difficulties, please open an issue so that we can make this process easier.

Prow runs in any kubernetes cluster. Our tackle utility helps deploy it correctly, or you can perform each of the steps manually.

Both of these are focused on Kubernetes Engine but should work on any kubernetes distro with no/minimal changes.

GitHub bot account

Before using tackle or deploying prow manually, ensure you have created a GitHub account for prow to use. Prow will ignore most GitHub events generated by this account, so it is important this account be separate from any users or automation you wish to interact with prow. For example, you still need to do this even if you'd just setting up a prow instance to work against your own personal repos.

Ensure the bot user has the following permissions
- Write access to the repos you plan on handling
- Owner access (and org membership) for the orgs you plan on handling (note it is possible to handle specific repos in an org without this)
Create a personal access token for the GitHub bot account, adding the following scopes (more details here)
- Must have the public_repo and repo:status scopes
- Add the repo scope if you plan on handing private repos
- Add the admin:org_hook scope if you plan on handling a github org
Set this token aside for later (we'll assume you wrote it to a file on your workstation at /path/to/oauth/secret)

Tackle deployment

Prow's tackle utility walks you through deploying a new instance of prow in a couple minutes, try it out!

You need a few things:

bazel build tool installed and working
The prow tackle utility. It is recommended to use it by running bazel run //prow/cmd/tackle from test-infra directory, alternatively you can install it by running go get -u k8s.io/test-infra/prow/cmd/tackle (in that case you would also need go installed and working). Note: Creating the tackle utility assumes you have the gcloud application in your $PATH, if you are doing this on another cloud skip to the Manual deployment below.
Optionally, credentials to a Kubernetes cluster (otherwise, tackle will help you create on GCP)

To install prow run the following from the test-infra directory and follow the on-screen instructions:

# Ideally use https://bazel.build, alternatively try:
#   go get -u k8s.io/test-infra/prow/cmd/tackle && tackle
$ bazel run //prow/cmd/tackle

This will help you through the following steps:

Choosing a kubectl context (and creating a cluster / getting its credentials if necessary)
Deploying prow into that cluster
Configuring GitHub to send prow webhooks for your repos. This is where you'll provide the absolute /path/to/oauth/secret

See the Next Steps section after running this utility.

Manual deployment

If you do not want to use the tackle utility above, here are the manual set of commands tackle will run.

Prow runs in a kubernetes cluster, so first figure out which cluster you want to deploy prow into. If you already have a cluster created you can skip to the Create cluster role bindings step.

Create the cluster

You can use the GCP cloud console to set up a project and create a new Kubernetes Engine cluster.

I'm assuming that PROJECT and ZONE environment variables are set, if you are using GCP. Skip this step if you are using another service to host your Kubernetes cluster.

$ export PROJECT=your-project
$ export ZONE=us-west1-a

Run the following to create the cluster. This will also set up kubectl to point to the new cluster on GCP.

$ gcloud container --project "${PROJECT}" clusters create prow \
  --zone "${ZONE}" --machine-type n1-standard-4 --num-nodes 2

Create cluster role bindings

As of 1.8 Kubernetes uses Role-Based Access Control (“RBAC”) to drive authorization decisions, allowing cluster-admin to dynamically configure policies. To create cluster resources you need to grant a user cluster-admin role in all namespaces for the cluster.

For Prow on GCP, you can use the following command.

$ kubectl create clusterrolebinding cluster-admin-binding \
  --clusterrole cluster-admin --user $(gcloud config get-value account)

For Prow on other platforms, the following command will likely work.

$ kubectl create clusterrolebinding cluster-admin-binding-"${USER}" \
  --clusterrole=cluster-admin --user="${USER}"

On some platforms the USER variable may not map correctly to the user in-cluster. If you see an error of the following form, this is likely the case.

Error from server (Forbidden): error when creating
"config/prow/cluster/starter-gcs.yaml": roles.rbac.authorization.k8s.io "<account>" is
forbidden: attempt to grant extra privileges:
[PolicyRule{Resources:["pods/log"], APIGroups:[""], Verbs:["get"]}
PolicyRule{Resources:["prowjobs"], APIGroups:["prow.k8s.io"], Verbs:["get"]}
APIGroups:["prow.k8s.io"], Verbs:["list"]}] user=&{<CLUSTER_USER>
[system:authenticated] map[]}...

Run the previous command substituting USER with CLUSTER_USER from the error message above to solve this issue.

$ kubectl create clusterrolebinding cluster-admin-binding-"<CLUSTER_USER>" \
  --clusterrole=cluster-admin --user="<CLUSTER_USER>"

There are relevant docs on Kubernetes Authentication that may help if neither of the above work.

Create the GitHub secrets

You will need two secrets to talk to GitHub. The hmac-token is the token that you give to GitHub for validating webhooks. Generate it using any reasonable randomness-generator, eg openssl rand -hex 20.

$ openssl rand -hex 20 > /path/to/hook/secret
$ kubectl create secret generic hmac-token --from-file=hmac=/path/to/hook/secret

The github-token is the OAuth2 token you created above for the [GitHub bot account]. If you need to create one, go to https://github.com/settings/tokens.

kubectl create secret generic github-token --from-file=token=/path/to/oauth/secret

Update the sample manifest

There are two sample manifests to get you started:

starter-s3.yaml sets up a minio as blob storage for logs and is particularly well suited to quickly get something working
starter-gcs.yaml uses GCS as blob storage and requires additional configuration to set up the bucket and ServiceAccounts. See [this](# Configure a GCS bucket) for details.

Regardless of which object storage you choose, the below adjustments are always needed:

The github token by replacing the <<insert-token-here>> string
The hmac token by replacing the << insert-hmac-token-here >> string
The domain by replacing the << your-domain.com >> string
Optionally, you can update the cert-manager.io/cluster-issuer: annotation if you use cert-manager
Your github organization(s) by replacing the << your_github_org >> string

Add the prow components to the cluster

Apply the manifest you edited above by executing one of the following two commands:

kubectl apply -f config/prow/cluster/starter-s3.yaml
kubectl apply -f config/prow/cluster/starter-gcs.yaml

After a moment, the cluster components will be running.

$ kubectl get pods
NAME                                       READY   STATUS    RESTARTS   AGE
crier-69b6bd8f48-6sg24                     1/1     Running   0          9m54s
deck-7f6867c46c-j7nnh                      1/1     Running   0          2m5s
deck-7f6867c46c-mkxzk                      1/1     Running   0          2m5s
ghproxy-fdd45dfb6-582fh                    1/1     Running   0          9m54s
hook-7cc4df66f7-r2qpl                      1/1     Running   1          9m53s
hook-7cc4df66f7-shnjq                      1/1     Running   1          9m53s
horologium-7976c7f597-ss86t                1/1     Running   0          9m53s
minio-d756b6477-d4w4k                      1/1     Running   0          9m53s
prow-controller-manager-657767bb69-5qzhp   1/1     Running   0          9m53s
sinker-8b645d469-jjw8r                     1/1     Running   0          9m53s
statusreconciler-669697d466-zqfsj          1/1     Running   0          3m11s
tide-65489c49b8-rpnn2                      1/1     Running   0          3m2s

Get ingress IP address

Find out your external address. It might take a couple minutes for the IP to show up.

kubectl get ingress prow
NAME   CLASS    HOSTS                     ADDRESS               	PORTS     AGE
prow   <none>   prow.<<yourdomain.com>>   an.ip.addr.ess          80, 443   22d

Go to that address in a web browser and verify that the "echo-test" job has a green check-mark next to it. At this point you have a prow cluster that is ready to start receiving GitHub events!

Add the webhook to GitHub

Add your first webhook

You have two options to do this:

You can do this with the update-hook utility:

# Note /path/to/hook/secret and /path/to/oauth/secret from earlier secrets step
# Note the an.ip.addr.ess from previous ingress step

# Ideally use https://bazel.build, alternatively try:
#   go get -u k8s.io/test-infra/experiment/update-hook && update-hook
$ bazel run //experiment/update-hook -- \
  --hmac-path=/path/to/hook/secret \
  --github-token-path=/path/to/oauth/secret \
  --hook-url http://an.ip.addr.ess/hook \
  --repo my-org/my-repo \
  --repo my-whole-org \
  --confirm=false  # Remove =false to actually add hook

Look for the http://an.ip.addr.ess/hook you added above. A green check mark (for a ping event, if you click edit and view the details of the event) suggests everything is working!

If you do not want to use the update-hook utility, you can go the GitHub web page and add the hook manually:

Go to your org or repo and click Settings -> Webhooks, and click Add webhook.
Change the Payload URL to http://an.ip.addr.ess/hook you are planning to add.
Change the Content type to application/json, and change your Secret to the hmac-path secret you created above.
Change the trigger to Send me **everything**.
Click Add webhook.

Use `hmac` tool to manage webhooks and hmac tokens (recommended)

If you need to configure webhooks for multiple orgs or repos, the manual process does not work that well as it can be error-prone, and it'll be painful when you want to replace the hmac token if it is accidentally leaked.

In such case, it's recommended to use the hmac tool to automatically manage the webhooks and hmac tokens for you via declarative configuration.

Next Steps

You now have a working Prow cluster (Woohoo!), but it isn't doing anything interesting yet. This section will help you complete any additional setup that your instance may need.

Configure a GCS bucket

If you want to persist logs and output in GCS, you need to follow the steps below.

When configuring Prow jobs to use the Pod utilities with decorate: true, job metdata, logs, and artifacts will be uploaded to a GCS bucket in order to persist results from tests and allow for the job overview page to load those results at a later point. In order to run these jobs, it is required to set up a GCS bucket for job outputs. If your Prow deployment is targeted at an open source community, it is strongly suggested to make this bucket world-readable.

In order to configure the bucket, follow the following steps:

provision a new service account for interaction with the bucket
create the bucket
(optionally) expose the bucket contents to the world
grant access to admin the bucket for the service account
serialize a key for the service account
upload the key to a Secret under the service-account.json key
edit the plank configuration for default_decoration_configs['*'].gcs_credentials_secret to point to the Secret above

After downloading the gcloud tool and authenticating, the following collection of commands will execute the above steps for you:

$ gcloud iam service-accounts create prow-gcs-publisher
identifier="$(  gcloud iam service-accounts list --filter 'name:prow-gcs-publisher' --format 'value(email)' )"
$ gsutil mb gs://prow-artifacts/ # step 2
$ gsutil iam ch allUsers:objectViewer gs://prow-artifacts # step 3
$ gsutil iam ch "serviceAccount:${identifier}:objectAdmin" gs://prow-artifacts # step 4
$ gcloud iam service-accounts keys create --iam-account "${identifier}" service-account.json # step 5
$ kubectl -n test-pods create secret generic gcs-credentials --from-file=service-account.json # step 6

Configure the version of plank's utility images

Before we can update plank's default_decoration_configs['*'] we'll need to retrieve the version of plank using the following:

$ kubectl get pod -lapp=plank -o jsonpath='{.items[0].spec.containers[0].image}' | cut -d: -f2
v20191108-08fbf64ac

Then, we can use that tag to retrieve the corresponding utility images in default_decoration_configs['*'] in config.yaml:

For more information on how the pod utility images for prow are versioned see autobump

plank:
  default_decoration_configs:
    '*':
      utility_images: # using the tag we identified above
        clonerefs: "gcr.io/k8s-prow/clonerefs:v20191108-08fbf64ac"
        initupload: "gcr.io/k8s-prow/initupload:v20191108-08fbf64ac"
        entrypoint: "gcr.io/k8s-prow/entrypoint:v20191108-08fbf64ac"
        sidecar: "gcr.io/k8s-prow/sidecar:v20191108-08fbf64ac"
      gcs_configuration:
        bucket: prow-artifacts # the bucket we just made
        path_strategy: explicit
      gcs_credentials_secret: gcs-credentials # the secret we just made

Adding more jobs

There are two ways to configure jobs:

Using the inrepoconfig feature to configure jobs inside the repo under test
Using the static config by editing the config configmap, some samples below:

Add the following to config.yaml:

periodics:
- interval: 10m
  name: echo-test
  decorate: true
  spec:
    containers:
    - image: alpine
      command: ["/bin/date"]
postsubmits:
  YOUR_ORG/YOUR_REPO:
  - name: test-postsubmit
    decorate: true
    spec:
      containers:
      - image: alpine
        command: ["/bin/printenv"]
presubmits:
  YOUR_ORG/YOUR_REPO:
  - name: test-presubmit
    decorate: true
    always_run: true
    skip_report: true
    spec:
      containers:
      - image: alpine
        command: ["/bin/printenv"]

Again, run the following to test the files, replacing the paths as necessary:

$ bazel run //prow/cmd/checkconfig -- --plugin-config=path/to/plugins.yaml --config-path=path/to/config.yaml

Now run the following to update the configmap.

$ kubectl create configmap config \
  --from-file=config.yaml=path/to/config.yaml --dry-run -o yaml | kubectl replace configmap config -f -

We create a make rule:

update-config: get-cluster-credentials
    kubectl create configmap config --from-file=config.yaml=config.yaml --dry-run -o yaml | kubectl replace configmap config -f -

Presubmits and postsubmits are triggered by the trigger plugin. Be sure to enable that plugin by adding it to the list you created in the last section.

Now when you open a PR it will automatically run the presubmit that you added to this file. You can see it on your prow dashboard. Once you are happy that it is stable, switch skip_report in the above config.yaml to false. Then, it will post a status on the PR. When you make a change to the config and push it with make update-config, you do not need to redeploy any of your cluster components. They will pick up the change within a few minutes.

When you push or merge a new change to the git repo, the postsubmit job will run.

For more information on the job environment, see jobs.md

Run test pods in different clusters

You may choose to run test pods in a separate cluster entirely. This is a good practice to keep testing isolated from Prow's service components and secrets. It can also be used to furcate job execution to different clusters. One can use a Kubernetes kubeconfig file (i.e. Config object) to instruct Prow components to use the build cluster(s). All contexts in kubeconfig are used as build clusters and the InClusterConfig (or current-context) is the default.

Create a secret containing a kubeconfig like this:

apiVersion: v1
clusters:
- name: default
  cluster:
    certificate-authority-data: fake-ca-data-default
    server: https://1.2.3.4
- name: other
  cluster:
    certificate-authority-data: fake-ca-data-other
    server: https://5.6.7.8
contexts:
- name: default
  context:
    cluster: default
    user: default
- name: other
  context:
    cluster: other
    user: other
current-context: default
kind: Config
preferences: {}
users:
- name: default
  user:
    token: fake-token-default
- name: other
  user:
    token: fake-token-other

Use gencred to create the kubeconfig file (and credentials) for accessing the cluster(s):

NOTE: gencred will merge new entries to the specified output file on successive invocations by default .

Create a default cluster context (if one does not already exist):

NOTE: If executing gencred with bazel like below, ensure --output is an absolute path.

$ bazel run //gencred -- \
  --context=<kube-context> \
  --name=default \
  --output=/tmp/kubeconfig.yaml \
  --serviceaccount

Create one or more build cluster contexts:

NOTE: the current-context of the existing kubeconfig will be preserved.

$ bazel run //gencred -- \
  --context=<kube-context> \
  --name=other \
  --output=/tmp/kubeconfig.yaml \
  --serviceaccount

Create a secret containing the kubeconfig.yaml in the cluster:

$ kubectl --context=<kube-context> create secret generic kubeconfig --from-file=config=/tmp/kubeconfig.yaml

Mount this secret into the prow components that need it (at minimum: plank, sinker and deck) and set the --kubeconfig flag to the location you mount it at. For instance, you will need to merge the following into the plank deployment:

spec:
  containers:
  - name: plank
    args:
    - --kubeconfig=/etc/kubeconfig/config # basename matches --from-file key
    volumeMounts:
    - name: kubeconfig
      mountPath: /etc/kubeconfig
      readOnly: true
  volumes:
  - name: kubeconfig
    secret:
      defaultMode: 0644
      secretName: kubeconfig # example above contains a `config` key

Configure jobs to use the non-default cluster with the cluster: field. The above example kubeconfig.yaml defines two clusters: default and other to schedule jobs, which we can use as follows:

periodics:
- name: cluster-unspecified
  # cluster:
  interval: 10m
  decorate: true
  spec:
    containers:
    - image: alpine
      command: ["/bin/date"]
- name: cluster-default
  cluster: default
  interval: 10m
  decorate: true
  spec:
    containers:
    - image: alpine
      command: ["/bin/date"]
- name: cluster-other
  cluster: other
  interval: 10m
  decorate: true
  spec:
    containers:
    - image: alpine
      command: ["/bin/date"]

This results in:

The cluster-unspecified and cluster-default jobs run in the default cluster.
The cluster-other job runs in the other cluster.

See gencred for more details about how to create/update kubeconfig.yaml.

Enable merge automation using Tide

PRs satisfying a set of predefined criteria can be configured to be automatically merged by Tide.

Tide can be enabled by modifying config.yaml. See how to configure tide for more details.

Set up GitHub OAuth

GitHub Oauth is required for PR Status and for the rerun button on Prow Status. To enable these features, follow the instructions in github_oauth_setup.md.

Configure SSL

Use cert-manager for automatic LetsEncrypt integration. If you already have a cert then follow the official docs to set up HTTPS termination. Promote your ingress IP to static IP. On GKE, run:

$ gcloud compute addresses create [ADDRESS_NAME] --addresses [IP_ADDRESS] --region [REGION]

Point the DNS record for your domain to point at that ingress IP. The convention for naming is prow.org.io, but of course that's not a requirement.

Then, install cert-manager as described in its readme. You don't need to run it in a separate namespace.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

getting_started_deploy.md

getting_started_deploy.md

Deploying Prow

GitHub bot account

Tackle deployment

Manual deployment

Create the cluster

Create cluster role bindings

Create the GitHub secrets

Update the sample manifest

Add the prow components to the cluster

Get ingress IP address

Add the webhook to GitHub

Add your first webhook

Use `hmac` tool to manage webhooks and hmac tokens (recommended)

Next Steps

Configure a GCS bucket

Configure the version of plank's utility images

Adding more jobs

Run test pods in different clusters

Enable merge automation using Tide

Set up GitHub OAuth

Configure SSL

Further reading

Files

getting_started_deploy.md

Latest commit

History

getting_started_deploy.md

File metadata and controls

Deploying Prow

GitHub bot account

Tackle deployment

Manual deployment

Create the cluster

Create cluster role bindings

Create the GitHub secrets

Update the sample manifest

Add the prow components to the cluster

Get ingress IP address

Add the webhook to GitHub

Add your first webhook

Use hmac tool to manage webhooks and hmac tokens (recommended)

Next Steps

Configure a GCS bucket

Configure the version of plank's utility images

Adding more jobs

Run test pods in different clusters

Enable merge automation using Tide

Set up GitHub OAuth

Configure SSL

Further reading

Use `hmac` tool to manage webhooks and hmac tokens (recommended)