JarTheHead's Klicky Probe for the RtV6 Revo nozzle adapter
This is a modification of Klicky probe for use with a Revo nozzle adapter. It is primarily remixed from SemperDiscere's DragonUHF probe. The RtV6 adds about 6mm of height to a standard Revo nozzle when using a typical RepRap nozzle. Only designed with Klicky (no plans for NG or UnKlicky).
Build Is Similar to the AB Mount.
- Solder wires to the outside pins of the D5F-L switch
- Remove Lever from switch
- Estimate wire length and cut
- Strip Wires
- Feed wires through Holes
- Seat Magnets
- Test continuity
- Trim wires
- Screw switch to Main Body
| Qty | Name |
|---|---|
| 4 | 6x3 Magnets |
| 2 | M2 10mm |
| 2 | 24 ga wire |
| 1 | Omron D2F-5 switch (or similar) |