HS13M - probably works the same

[SaiCode-DEV]

I bought the Flexispot E7 Pro and it has the HS12M remothe. is there a simple way to test/check if the protocol changed?

[iMicknl]

Not really. But if you have a RJ45 port on your controller, big chance protocol is supported. You could also open your display/remote and see what the pinout is.

[SaiCode-DEV]

Sadly no spesific Information under the cables

[iMicknl]

@SaiCode-DEV the easiest way to test this is to just hook up an ESP32 to your control box. See #67.

[MauiR]

Hello, I also own the Flexispot E7 Pro desk. Unfortunately, with the new Office-desk.yaml configuration in ESPHome (https://github.com/iMicknl/LoctekMotion_IoT/blob/6a1da5dc22688cd4eb8ca8e90e5c4b123c4354d9/packages/office-desk.yaml), only the desk height functionality is working. All other features such as Alarm, Desk position, Preset 1, Preset 2, Sit, and Stand are non-functional.
The "desk height" however, is working perfectly and updates in real-time

I've utilized an ESP32 with this RJ45 connector layout: https://github.com/iMicknl/LoctekMotion_IoT?tab=readme-ov-file#hs01b-1

[iMicknl]

@MauiR have you tried the new configuration and pin-out from #67?

[MauiR]

@MauiR have you tried the new configuration and pin-out from #67?

Yes, I've chosen the new configuration and pinout. However, I haven't connected SWIM and RES because there were no specifications provided for them on the ESP32.

[MauiR]

I can say that I have now managed to get it running with the Flexispot 7 Pro. However, it only works with an ESP8266. I haven't been able to get it running with an ESP32. I'll take another closer look.

[Rudd-O]

I'm interested in this too. Pinout and software. How can I help?

There is no Ethernet port in my controller. The controller pinout shown above in the photo is identical to my desk's controller. My control box does NOT have an Ethernet port (other than the controller's own socket for its own use, of course). Can I tap into the controller instead?