Country level scale factor

[Meongdo-Jang]

Name and Institution (Required)

Name: Meongdo Jang
Institution: Konkuk Univ.

Confirm you have reviewed the following documentation

• Support guidelines
• User manuals
• [O] Debugging GEOS-Chem and HEMCO errors
• Current and past Github issues

Description of your issue or question

I'm trying to set up a run in GEOS-Chem Classic ver. 14.1.1 with country level scale factors.
Now, I have an error in HEMCO as like attached files. How can I solve it?
HEMCO_Config.rc.txt
GC.log

[lizziel]

Hi @Meongdo-Jang, thanks for reaching out. The error is because HEMCO expects a different set of columns than the ones you programmed. I believe you need to put the country level scale factors entry in the scale factors section of HEMCO_Config.rc later in the file. Find this section of HEMCO_Config.rc and try moving your scale factors file entry there.

### END SECTION BASE EMISSIONS ###

###############################################################################
### BEGIN SECTION SCALE FACTORS
###############################################################################

[Meongdo-Jang]

Thanks!
As like you mentioned, I got the following error.

----------------------------------------------------------
HEMCO ERROR: Cannot properly read mask coverage: COUNTRY_MASK
 --> LOCATION:
 -> at UpdateDtaProperties (in module HEMCO/src/Core/hco_config_mod.F90)

HEMCO ERROR: Error encountered in routine "UpdateDtaProperties"
 --> LOCATION:
  Config_ReadCont (hco_config_mod.F90)

HEMCO ERROR: Error in HEMCO_Config.rc @ line: ### BEGIN SECTION MASKS
 --> LOC
 ATION: Config_ReadFile (hco_config_mod.F90)
[GC.log](https://github.com/geoschem/HEMCO/files/15050314/GC.log)
[GC.log](https://github.com/geoschem/HEMCO/files/15050315/GC.log)
[scalefactor.txt](https://github.com/geoschem/HEMCO/files/15050317/scalefactor.txt)
[countrymask_0.1x0.1.nc.txt](https://github.com/geoschem/HEMCO/files/15050318/countrymask_0.1x0.1.nc.txt)

[lizziel]

This is an error when reading the configuration file. I searched the HEMCO code for string 'Cannot properly read mask cover' and found that the error is being tripped in here with this check:

     IF ( nEdges /= 4 ) THEN
         errMsg = 'Cannot properly read mask coverage: '                 // &
                  TRIM( Lct%Dct%cName )
         CALL HCO_Error( errMsg, RC, thisLoc )
         RETURN
      ENDIF

It looks like your country mask is not being parsed correctly because it is not in the correct location in HEMCO_Config.rc. It needs to be in the non-emissions data section. Look for this string in HEMCO_Config.rc:

###############################################################################
### NON-EMISSIONS DATA (subsection of BASE EMISSIONS SECTION)
###
### Non-emissions data. The following fields are read through HEMCO but do
### not contain emissions data. The extension number is set to wildcard
### character denoting that these fields will not be considered for emission
### calculation. A given entry is only read if the assigned species name is
### an HEMCO species.
###############################################################################

See also the HEMCO ReadTheDocs section on country scale factors.

[lizziel]

Hi @Meongdo-Jang, were you able to get this to work?

[Meongdo-Jang]

Thank so much for your e-mail! Until now, I could't solve that. Meongdo Jang

[github-actions]

This issue has been automatically marked as stale because it has not had recent activity. If there are no updates within 7 days it will be closed. You can add the "never stale" tag to prevent the issue from closing this issue.