Cant set several setting Junkers ZSBE

[anno171986]

DESCRIPTION

A clear and concise description of what the problem is or the change requested.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• [x ] Searched the issue in issues
• Searched the issue in discussions
• Searched the issue in the docs
• Searched the issue in the chat
• Provide the System information in the area below, taken from http://<IP>/api/system

system |  
version | "3.7.0-dev.43"
uptime | "000+00:25:34.900"
uptimeSec | 1534
platform | "ESP32"
cpuType | "ESP32-D0WD-V3"
arduino | "Tasmota Arduino v2.0.17"
sdk | "4.4.8.240628"
freeMem | 165
maxAlloc | 103
freeCaps | 115
usedApp | 1690
freeApp | 294
partition | "app0"
resetReason | "Software reset CPU / Software reset CPU"
psram | false
model | ""
network |  
network | "WiFi"
hostname | "Heizung"
RSSI | -73
BSSID | "set"
TxPowerSetting | 78
staticIP | false
lowBandwidth | false
disableSleep | true
enableMDNS | true
enableCORS | false
APProvisionMode | "disconnected"
APSecurity | "wpa2"
APSSID | "ems-esp"
ntp |  
NTPStatus | "connected"
enabled | true
server | "time.google.com"
tzLabel | "Europe/Amsterdam"
mqtt |  
MQTTStatus | "disconnected"
enabled | false
clientID | "ems-esp"
keepAlive | 60
cleanSession | false
entityFormat | 3
base | "ems-esp"
discoveryPrefix | "homeassistant"
discoveryType | 0
nestedFormat | 1
haEnabled | false
mqttQos | 0
mqttRetain | false
publishTimeHeartbeat | 60
publishTimeBoiler | 10
publishTimeThermostat | 10
publishTimeSolar | 10
publishTimeMixer | 10
publishTimeWater | 10
publishTimeOther | 10
publishTimeSensor | 10
publishSingle | false
publish2command | false
sendResponse | false
syslog |  
enabled | false
sensor |  
temperatureSensors | 0
temperatureSensorReads | 0
temperatureSensorFails | 0
analogSensors | 0
analogSensorReads | 0
analogSensorFails | 0
api |  
APICalls | 76
APIFails | 0
bus |  
busStatus | "connected"
busProtocol | "HT3"
busTelegramsReceived | 1217
busReads | 219
busWrites | 6
busIncompleteTelegrams | 0
busReadsFailed | 0
busWritesFailed | 0
busRxLineQuality | 100
busTxLineQuality | 100
settings |  
boardProfile | "CUSTOM"
locale | "de"
txMode | 1
emsBusID | 11
showerTimer | false
showerMinDuration | 180
showerAlert | false
phyType | 0
rxGPIO | 4
txGPIO | 5
dallasGPIO | 14
pbuttonGPIO | 0
ledGPIO | 2
hideLed | false
noTokenApi | false
readonlyMode | false
fahrenheit | false
dallasParasite | false
boolFormat | 6
boolDashboard | 1
enumFormat | 1
analogEnabled | true
telnetEnabled | true
maxWebLogBuffer | 25
webLogBuffer | 25
modbusEnabled | false
forceHeatingOff | false
devices |  
0 |  
type | "boiler"
name | "Condens 2500/5000W, Logamax/Logomatic, Cerapur Top, Greenstar, Generic HT3"
deviceID | "0x08"
productID | 95
brand | ""
version | "18.08"
entities | 68
handlersReceived | "0x10 0x11 0x15 0x1C 0x18 0x19 0x34 0x04"
handlersFetched | "0x14 0x16 0x33"
handlersPending | "0xBF 0xC2 0x1A 0x35 0x26 0x2A 0x2E 0x3B"
handlersIgnored | "0x23"
1 |  
type | "thermostat"
name | "FW100"
deviceID | "0x10"
productID | 105
brand | "Junkers"
version | "13.07"
entities | 23
handlersReceived | "0x06"
handlersFetched | "0x016F 0x0165 0x01D3"
handlersPending | "0xA3 0xA2 0x12 0x13 0x0170 0x0171 0x0172 0x0166 0x0167 0x0168 0xBB 0x23"
handlersIgnored | "0xBE"
2 |  
type | "controller"
name | "HT3"
deviceID | "0x09"
productID | 95
brand | ""
version | "18.08"
entities | 0

TO REPRODUCE

Always there

EXPECTED BEHAVIOUR

I can't set several Entities of my Junkers ZSBE Boiler (e.g. boiler/boilhystoff , boiler/hyston, boiler/boilhystoff). I expected that this works like it do for boiler/boilhyston.

SCREENSHOTS

none

ADDITIONAL CONTEXT

Log output:

2024-10-07 20:43:59.196 I 663: [command] Called command boiler/hyston (Einschalttemperaturdifferenz) with value 5 and id 9 on device 0x08
2024-10-07 20:43:59.343 T 664: [emsesp] me(0x0B) -W-> boiler(0x08), UBAParameterWW(0x33), data: 05 (offset 3)
2024-10-07 20:43:59.410 T 665: [emsesp] boiler(0x08) -B-> all(0x00), UBAParameterWW(0x33), data: 08 FF 2D 00 00 46 FF 01 4B 00 FF FF
2024-10-07 20:43:59.749 T 666: [emsesp] me(0x0B) -R-> boiler(0x08), UBAParameterWW(0x33), length: 1 (offset 3)
2024-10-07 20:43:59.771 T 667: [emsesp] boiler(0x08) -W-> me(0x0B), UBAParameterWW(0x33), data: 00 (offset 3)

2024-10-07 20:45:02.083 I 711: [command] Called command boiler/hystoff (Ausschalttemperaturdifferenz) with value 5 and id 9 on device 0x08
2024-10-07 20:45:02.218 T 712: [emsesp] me(0x0B) -W-> boiler(0x08), UBAParameterWW(0x33), data: 05 (offset 4)
2024-10-07 20:45:02.377 T 713: [emsesp] boiler(0x08) -B-> all(0x00), UBAParameterWW(0x33), data: 08 FF 2D 00 00 46 FF 01 4B 00 FF FF
2024-10-07 20:45:02.655 T 714: [emsesp] me(0x0B) -R-> boiler(0x08), UBAParameterWW(0x33), length: 1 (offset 4)
2024-10-07 20:45:02.676 T 715: [emsesp] boiler(0x08) -W-> me(0x0B), UBAParameterWW(0x33), data: 00 (offset 4)

2024-10-07 20:45:33.454 I 730: [command] Called command boiler/boilhystoff (Ausschaltdifferenz) with value 5
2024-10-07 20:45:33.577 T 731: [emsesp] me(0x0B) -W-> boiler(0x08), UBAParameters(0x16), data: 05 (offset 4)
2024-10-07 20:45:33.674 T 732: [emsesp] boiler(0x08) -B-> all(0x00), UBAParameters(0x16), data: FF 3A 64 00 00 FA 05 01 03 64 0A 05
2024-10-07 20:45:33.907 T 733: [emsesp] boiler(0x08) -B-> all(0x00), UBAMonitorFast(0x18), data: 22 01 56 64 25 09 03 25 C0 80 00 80 00 01 31 FF FF 0A 00 00 00 00 00 02 18
2024-10-07 20:45:34.129 T 734: [emsesp] boiler(0x08) -W-> 13(0x13), ?(0x05), data: 00 (offset 34)
2024-10-07 20:45:34.460 T 735: [emsesp] boiler(0x08) -B-> all(0x00), UBAMonitorWW(0x34), data: 0F 01 F1 01 F1 A1 00 00 03 00 01 0D 5A 00 09 91 00
2024-10-07 20:45:34.700 T 736: [emsesp] me(0x0B) -R-> boiler(0x08), UBAParameters(0x16), length: 1 (offset 4)
2024-10-07 20:45:34.728 T 737: [emsesp] boiler(0x08) -W-> me(0x0B), UBAParameters(0x16), data: 00 (offset 4)

2024-10-07 20:47:34.597 I 826: [command] Called command boiler/boilhyston (Einschaltdifferenz) with value -5
2024-10-07 20:47:34.738 T 827: [emsesp] me(0x0B) -W-> boiler(0x08), UBAParameters(0x16), data: FB (offset 5)
2024-10-07 20:47:34.810 T 828: [emsesp] boiler(0x08) -B-> all(0x00), UBAParameters(0x16), data: FF 3A 64 00 00 FB 05 01 03 64 0A 05
2024-10-07 20:47:35.144 T 829: [emsesp] me(0x0B) -R-> boiler(0x08), UBAParameters(0x16), length: 1 (offset 5)
2024-10-07 20:47:35.164 T 830: [emsesp] boiler(0x08) -W-> me(0x0B), UBAParameters(0x16), data: FB (offset 5)

[proddy]

is there a way you can manually change these settings on your system and use EMS-ESP to monitor the telegram traffic? That way we can verify the mappings.

[anno171986]

Until now I didn't found any of this settings on the control panel, also not the one which I can set. I will have a deeper look into the settings. I searched also the manual but can't find it until now.

[anno171986]

I can't find it. Maybe someone have the same heater and can help

[MichaelDvP]

Called command boiler/hyston (Einschalttemperaturdifferenz) with value 5

Will not work because this value has to be negative.

For the hystoff values: If the boiler has a modulated burner it tries to modulate down on the setpoint and does not have a hystoff-value. (just a guess)