Skip to content

Latest commit

 

History

History
86 lines (54 loc) · 2.12 KB

README.md

File metadata and controls

86 lines (54 loc) · 2.12 KB
Raw

nu-isp-cli

Command line implementation of nu-isp flashing protocol over hid used by Nuvoton microcontrollers.

setup

windows

No special preparaiton needed. Install it, and it just works.

mac

No special preparaiton needed. Install it, and it just works.

linux

You'll need libusb. Depending on your distribution, you might need to sudo apt-get install libusb-1.0-0-dev pkg-config.

If you'd like not to use sudo everytime, you'll need udev rules. With your board plugged in and in bootloader mode, use lsusb to find its vendor-id and product-id, seen here as 0416:a316.

$ lsusb
...
Bus 001 Device 002: ID 0416:a316 Winbond Electronics Corp.
...

Then put them in the following format and save it to something like /etc/udev/rules.d/99-nuvoton-isp.rules

SUBSYSTEM=="usb", ATTR{idVendor}=="0416", ATTR{idProduct}=="3f00", MODE="666"
SUBSYSTEM=="usb", ATTR{idVendor}=="0416", ATTR{idProduct}=="a316", MODE="666"

Then replug your board and let it into bootloader mode again.

install

cargo install nu-isp-cli

use

$ nu-isp-cli
Nuvoton NuMicro ISP_HID Programming Tool [unofficial]
Version 0.7.1

Quick Reference:

    nu-isp-cli <INPUT>

    nu-isp-cli info

    nu-isp-cli erase

    nu-isp-cli flash <INPUT>

    nu-isp-cli <VID:PID> info

    nu-isp-cli <VID:PID> erase

    nu-isp-cli <VID:PID> flash <INPUT>

    nu-isp-cli --help

It will attempt to autodetect a device from list of known device-ids and using the first one available or you can specify vid and pid (before the subcommand) instead.

$ nu-isp-cli info
Printing info...
DEVICE NUC126LG4AE (PDID: 00C05204)
CONFIG FFFFFF7E:0001C000
Done.

It accepts binary files, elf files or ihex format text files for your convenience.

$ nu-isp-cli firmware.elf

supported chips

It is tested with NUC123 , NUC126 , NUC029 and M032 series. and it should work with many other chips as long as their bootloaders are compatible. I'll happily add new chips to the list upon your report confirming its correct operation.