Skip to content

Latest commit

 

History

History
41 lines (32 loc) · 2.69 KB

README.md

File metadata and controls

41 lines (32 loc) · 2.69 KB

Interface Libraries

GitHub repo size GitHub

Libraries for working with different interfaces.

I2C (Inter-Integrated Circuit) is a synchronous, multi-master, multi-slave, packet switched, single-ended, serial communication bus invented by Philips Semiconductor. It is widely used for attaching lower-speed peripheral ICs to processors and microcontrollers in short-distance, intra-board communication.

TWI (hardware I2C)

This is a hardware version of the I2C interface for AVR microcontrollers (ATmega8/328p).

The Serial Peripheral Interface is a synchronous serial communication interface specification used for short-distance communication, primarily in embedded systems. The interface was developed by Motorola. Typical applications include Secure Digital cards and liquid crystal displays.

A universal asynchronous receiver-transmitter is a computer hardware device for asynchronous serial communication in which the data format and transmission speeds are configurable. The electric signaling levels and methods are handled by a driver circuit external to the UART. One or more UART peripherals are commonly integrated in microcontroller chips.

1-wire is a device communications bus system designed by Dallas Semiconductor Corp. that provides low-speed data, signaling, and power over a single conductor. 1-wire is similar in concept to I2C, but with lower data rates and longer range. It is typically used to communicate with small inexpensive devices such as digital thermometers and weather instruments.

EEPROM stands for electrically erasable programmable read-only memory and is a type of non-volatile memory used in computers, integrated in microcontrollers for smart cards and remote keyless systems, and other electronic devices to store relatively small amounts of data but allowing individual bytes to be erased and reprogrammed.

This is an FM tuner that has an I2C interface, stereo audio output, digital audio volume settings, radio frequency, and is supported by RDS. In addition to the rda5807fp library itself, the AVRadio project is attached (a radio receiver based on an AVR microcontroller, rda5807fp and LCD display).

License

Copyright © 2019 dsuhoi.

This project is GPL-3.0 licensed.