Table View Guide

Overview

UITableViews are one of the most commonly used views in iOS programming. They are used to display grouped lists of cells. Here are some examples of UITableViews:

UITableViews can be highly performant, displaying thousands of rows of data. They also have built-in facilities for handling common behavior such as scrolling, selecting rows, editing the table's contents, and animating the addition or removal of rows.

This guide covers typical use cases and common issues that arise when using UITableViews. All our examples are provided in Swift, but they should be easy to adapt for an Objective-C project. A more comprehensive guide by Apple (written for Objective-C) can found here.

Your first `UITableView`

In order to use a UITableView, you must first add one to your view controller's root view. When working with storyboards, this can be done in Interface Builder simply by dragging a UITableView from the Object Library onto your view controller and then creating an @IBOutlet so that you have a reference to your UITableView in your view controller's code.

Of course, you can also programmatically instantiate a UITableView and add it as a subview to your view controller's root view. The remainder of this guide assumes that you are able to properly instantiate and obtain a reference to a UITableView.

`UITableView` vs `UITableViewController`

You'll notice that in the Object Library there are two objects: Table View and Table View Controller. You'll almost always want to use Table View object. A Table View Controller or UITableViewController is a built-in view controller class that has its root view set to be a UITableView. This class does a small amount of work for you (e.g. it already implements the UITableViewDataSource and UITableViewDelegate protocols), but the requirement that your view controller's root view be a UITableView ends up being too inflexible if you need to layout other views in the same screen.

The `dataSource` and `delegate` properties

As with other views in the UIKit framework, in order to use a UITableView you provide it with delegates that are able to answer questions about what to show in the table and how the application should respond to user interactions with the table.

The UITableView has two delegates that you must provide by setting the corresponding properties on your UITableView object.

The dataSource property must be set to an object that implements the UITableViewDataSource protocol. This object is responsible for the content of the table including providing the actual UITableViewCells that will be shown.
The delegate property must be set to an object that implements the UITableViewDelegate protocol. This object controls the basic visual appearance of and user interactions with the table. It is not technically mandatory for you provide your own delegate, but in practice you will almost always want to do something that requires implementing your own UITableViewDelegate.

The following is the most basic way to set up a UITableView.

import UIKit

class ViewController: UIViewController, UITableViewDataSource {
    @IBOutlet weak var tableView: UITableView!

    let data = ["New York, NY", "Los Angeles, CA", "Chicago, IL", "Houston, TX",
        "Philadelphia, PA", "Phoenix, AZ", "San Diego, CA", "San Antonio, TX",
        "Dallas, TX", "Detroit, MI", "San Jose, CA", "Indianapolis, IN",
        "Jacksonville, FL", "San Francisco, CA", "Columbus, OH", "Austin, TX",
        "Memphis, TN", "Baltimore, MD", "Charlotte, ND", "Fort Worth, TX"]

    override func viewDidLoad() {
        super.viewDidLoad()
        tableView.dataSource = self
    }

     func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
        let cell = UITableViewCell(style: .default, reuseIdentifier: nil)
        cell.textLabel?.text = data[indexPath.row]
        return cell
    }
    
    
    func tableView(_ tableView: UITableView, numberOfRowsInSection section: Int) -> Int {
        return data.count
    }
}

//  ViewController.h
#import <UIKit/UIKit.h>

@interface ViewController : UIViewController <UITableViewDataSource>

@property (weak, nonatomic) IBOutlet UITableView *tableView;

@end

//  ViewController.m
#import "ViewController.h"

@interface ViewController ()

@end

@implementation ViewController

NSArray *data;

- (void)viewDidLoad {
    [super viewDidLoad];
    data = @[@"New York, NY", @"Los Angeles, CA", @"Chicago, IL", @"Houston, TX",
             @"Philadelphia, PA", @"Phoenix, AZ", @"San Diego, CA", @"San Antonio, TX",
             @"Dallas, TX", @"Detroit, MI", @"San Jose, CA", @"Indianapolis, IN",
             @"Jacksonville, FL", @"San Francisco, CA", @"Columbus, OH", @"Austin, TX",
             @"Memphis, TN", @"Baltimore, MD", @"Charlotte, ND", @"Fort Worth, TX"];
    self.tableView.dataSource = self;
}

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
    UITableViewCell *cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:nil];
    cell.textLabel.text = data[indexPath.row];
    return  cell;
}

- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section{
    return data.count;
}
@end

Provided that the @IBOutlet tableView has been connected to a UITableView in your storyboard, you will see something like this when running the above code:

Cities Table

Notice that we set self.tableView.dataSource = self in the viewDidLoad method. A common error that will result in a blank or misbehaving table is forgetting to set the dataSource or delegate property on your UITableView. If something is not behaving the way you expect with your UITableView, the first thing to check is that you have set your dataSource and delegate properly.

In this case, since the only view managed by our ViewController is the table, we also have our ViewController implement UITableViewDataSource so that all the code for this screen is in one place. This is a fairly common pattern when using UIKit delegates, but you may want to create a separate class to implement UITableViewDataSource or UITableViewDelegate in more complex situations.

We implement the two required methods in the UITableViewDataSource protocol:

func tableView(_ tableView: UITableView, numberOfRowsInSection section: Int) -> Int is responsible for telling the UITableView how many rows are in each section of the table. Since we only have one section, we simply return the length of our data array which corresponds to the number of total cells we want. To create tables with multiple sections we would implement the [numberOfSections][numberofsections] method and possibly return different values in our [numberOfRowsInSection][numberofrowsinsection] method depending the section` that was passed in.
func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell is responsible for returning a preconfigured cell that will be used to render the row in the table specified by the indexPath. The indexPath identifies a specific row in a specific section of the table the via the indexPath.section and indexPath.row. Since we are only working with one section, we can ignore section for now.

Reusing `UITableViewCells`

An implementation of the [cellForRowAt][cellforrowat] method must return an instance of UITableViewCell that is configured with the data for the row specified by the indexPath. In the above code, we created a new instance of the UIKit-provided UITableViewCell class for each call to cellForRowAt. Since our table had only a few simple cells you might not have noticed any appreciable performance drop. However, in practice, you will almost never create a new cell object for each row due to performance costs and memory implications. This becomes especially important once you start creating more complex cells or have tables with large numbers of rows.

In order to avoid the expensive costs of creating a new cell object for each row, we can adopt a strategy of cell reuse. Notice that the table can only display a small number of rows on the screen at once. This means we only have to create at most as many UITableViewCell objects as there are rows that appear on the screen at once. Once a row disappears from view—say when the user scrolls the table—we can reuse the same cell object to render another row that comes into view.

To implement such a strategy from scratch we would need to know which rows are currently being displayed and to be able to respond if the set of visible rows is changed. Luckily UITableView has built-in methods that make cell reuse quite simple to implement. We can modify our code example above to read

import UIKit

class ViewController: UIViewController, UITableViewDataSource {
    @IBOutlet weak var tableView: UITableView!

    let CellIdentifier = "com.codepath.MyFirstTableViewCell"

    let data = ["New York, NY", "Los Angeles, CA", "Chicago, IL", "Houston, TX",
        "Philadelphia, PA", "Phoenix, AZ", "San Diego, CA", "San Antonio, TX",
        "Dallas, TX", "Detroit, MI", "San Jose, CA", "Indianapolis, IN",
        "Jacksonville, FL", "San Francisco, CA", "Columbus, OH", "Austin, TX",
        "Memphis, TN", "Baltimore, MD", "Charlotte, ND", "Fort Worth, TX"]

    override func viewDidLoad() {
        super.viewDidLoad()
        tableView.dataSource = self
        tableView.register(UITableViewCell.self, forCellReuseIdentifier: CellIdentifier)
    }

    func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
        // If there are no cells available for reuse, it will always return a cell so long as the identifier has previously been registered
        let cell = tableView.dequeueReusableCell(withIdentifier: CellIdentifier, for: indexPath)
        cell.textLabel?.text = data[indexPath.row]
        return cell
    }

    func tableView(_ tableView: UITableView, numberOfRowsInSection section: Int) -> Int {
        return data.count
    }
}

//  ViewController.h
#import <UIKit/UIKit.h>

@interface ViewController : UIViewController <UITableViewDataSource>

@property (weak, nonatomic) IBOutlet UITableView *tableView;

@end

//  ViewController.m
#import "ViewController.h"

@interface ViewController ()

@end

@implementation ViewController

NSArray *data;
NSString *CellIdentifier = @"com.codepath.MyFirstTableViewCell";

- (void)viewDidLoad {
    [super viewDidLoad];
    data = @[@"New York, NY", @"Los Angeles, CA", @"Chicago, IL", @"Houston, TX",
             @"Philadelphia, PA", @"Phoenix, AZ", @"San Diego, CA", @"San Antonio, TX",
             @"Dallas, TX", @"Detroit, MI", @"San Jose, CA", @"Indianapolis, IN",
             @"Jacksonville, FL", @"San Francisco, CA", @"Columbus, OH", @"Austin, TX",
             @"Memphis, TN", @"Baltimore, MD", @"Charlotte, ND", @"Fort Worth, TX"];
    self.tableView.dataSource = self;
    [self.tableView registerClass:[UITableViewCell class] forCellReuseIdentifier:CellIdentifier];
}

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
// If there are no cells available for reuse, it will always return a cell so long as the identifier has previously been registered    
    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier forIndexPath:indexPath];
    cell.textLabel.text = data[indexPath.row];
    return cell;
}

- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section{
    return data.count;
}
@end

In viewDidLoad we call our UITableView's register(AnyClass?, forCellReuseIdentifier: to associate the built-in class UITableViewCell with the constant string identifier CellIdentifier. Notice that we do not explicitly create an instance here. The UITableView will handle the creation of all cell objects for us.

In cellForRowAt indexPath:, we call dequeueReusableCell(withIdentifier: for:) to obtain a pre-created instance of UITableViewCell and then we proceed to populate this cell with the data for the given row before returning it.

Notes about the cell reuse pattern

Be sure to provide a unique reuse identifier for each type of cell that you in your table so that you don't end up accidentally getting an instance of the wrong type of cell. Also be sure to register a cell identifier with the UITableView before attempting to dequeue a cell using that identifier. Attempting to call dequeueReusableCell(withIdentifier: for:) with an unregistered identifier will cause your app to crash.
When we explicitly instantiated each cell object in cellForRowAt we were able to specify the cell style: .Default. When we called dequeueReusableCell(withIdentifier: for:) there was no place to specify the style. When using dequeueReusableCell(withIdentifier: for:) you have no control over the initialization of your cell. In practice, you will want to create your own subclass of UITableViewCell and add initialization common to all cells in the class in the initializer.
Any configuration of the cell on a per row basis should be done in cellForRowAt. When designing a custom cell class be sure to expose a way to configure properties you need to change on a per row basis. In this case, the built-in UITableViewCell gives us access to its textLabel so that we are able to set different text for each row. With more complex cells, however, you may want to provide convenience methods that wrap the configuration logic within the custom cell class.
There are no guarantees on the state of the cell that is returned by dequeueReusableCell(withIdentifier: for:). The cell will not necessarily be in the newly initialized state. In general, it will have properties that were previously set when configuring it with the data of another row. Be sure reconfigure all properties to match the data of the current row!

Custom cells

Built-in cell styles

UIKit provides a number of cell styles that can be used with the built-in UITableViewCell class. Depending on the cell style you specify when initializing the UITableViewCell you can use the properties textLabel, detailTextLabel, and imageView to configure the contents of your cell. In practice, you'll almost never use any of the built-in cell styles except maybe the default one that contains a single textLabel. However, you should be aware of these properties when subclassing UITableViewCell and avoid using these names for properties that refer to subviews in your own custom cell classes. Doing so may lead to strange bugs when manipulating the sizes of elements in a cell.

Creating customized cells

You will rarely ever use the built-in standard UITableViewCell class. In almost all cases you will want to create your own types of cells that have components and layout matching your needs. As with any other view in UIKit, there are three ways you can design your custom cell type: within a storyboard itself via prototype cells, creating a separate NIB via Interface Builder, or programmatically laying out your cell.

All three methods can be broken down into the following steps:

Design your cell's layout and populate it with UI elements that configurable. This creates a template that can then be configured later on a per-row basis with different data.
Create a subclass of UITableViewCell and associate it with the user interface for the cell. This includes binding properties in your class to UI elements. You will also need to expose a way for users of the cell class to configure the appearance of the cell based on a given row's data.
Register your cell type and give it a reuse identifier.
Dequeue a cell instance using the reuse identifier and configure it to match a row's data.

We'll continue our previous example by creating a custom cell that has two separate labels with different font sizes for the city name and state initials.

Using prototype cells

To use prototype cells you must be in the Interface Builder and have already placed a table view in your view controller. In order to create a prototype cell, you simply drag a Table View Cell from the Object Library onto your table view. You can now layout and add objects your prototype cell as you would with any other view.

Once you are satisfied with the design of your cell, you must create a custom class and associate it with your UI template. Select File -> New -> File... -> iOS -> Source -> Cocoa Touch Class. Create your class as a subclass of UITableViewCell. You must now associate your class with your prototype cell. In the storyboard editor, select your prototype cell and then select the Identity Inspector. Set the Custom Class property of the prototype cell to the name of the class you just created.

You will now be able to select your custom cell class in the Assistant Editor (tuxedo mode) and connect IBOutlets from your prototype cell into your class as you would with any other view. Note that you must select the "content view" of your prototype cell in order for your custom cell class to show up under the Assistant Editor's automatic matching.

One you are satisfied with the design of your cell and the corresponding code in your custom class, you must register your cell for reuse by providing it with a reuse identifier. In the storyboard editor, select your prototype cell and then select the Attributes Inspector. Set the Identifier field (Reuse Identifier) to a unique string that can be used to identify this type of cell.

You can now use this identifier when calling dequeueReusableCell(withIdentifier: for:) in your implementation of cellForRowAt indexPath:.

import UIKit

class DemoPrototypeCell: UITableViewCell {
    @IBOutlet weak var cityLabel: UILabel!
    @IBOutlet weak var stateLabel: UILabel!
}

//  DemoPrototypeCell.h

#import <UIKit/UIKit.h>

@interface DemoPrototypeCell : UITableViewCell

@property (weak, nonatomic) IBOutlet UILabel *cityLabel;
@property (weak, nonatomic) IBOutlet UILabel *stateLabel;

@end

Notice that the compiler cannot infer the type of your custom cell class from the reuse identifier and you must explicitly cast the resulting object to the correct class.

import UIKit

class ViewController: UIViewController, UITableViewDataSource {
    @IBOutlet weak var tableView: UITableView!

    let data = ["New York, NY", "Los Angeles, CA", "Chicago, IL", "Houston, TX",
        "Philadelphia, PA", "Phoenix, AZ", "San Diego, CA", "San Antonio, TX",
        "Dallas, TX", "Detroit, MI", "San Jose, CA", "Indianapolis, IN",
        "Jacksonville, FL", "San Francisco, CA", "Columbus, OH", "Austin, TX",
        "Memphis, TN", "Baltimore, MD", "Charlotte, ND", "Fort Worth, TX"]

    override func viewDidLoad() {
        super.viewDidLoad()
        tableView.dataSource = self
    }

    func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
        let cell = tableView.dequeueReusableCell(withIdentifier: "com.codepath.DemoPrototypeCell", for: indexPath) as! DemoPrototypeCell
        let cityState = data[indexPath.row].components(separatedBy: ", ")
        cell.cityLabel.text = cityState.first
        cell.stateLabel.text = cityState.last
        return cell
    }

    func tableView(_ tableView: UITableView, numberOfRowsInSection section: Int) -> Int {
        return data.count
    }    
}

//  ViewController.h

#import <UIKit/UIKit.h>

@interface ViewController : UIViewController <UITableViewDataSource>

@property (weak, nonatomic) IBOutlet UITableView *tableView;

@end

//  ViewController.m

#import "ViewController.h"
#import "DemoPrototypeCell.h"

@interface ViewController ()

@end

@implementation ViewController

NSArray *data;

- (void)viewDidLoad {
    [super viewDidLoad];
    data = @[@"New York, NY", @"Los Angeles, CA", @"Chicago, IL", @"Houston, TX",
             @"Philadelphia, PA", @"Phoenix, AZ", @"San Diego, CA", @"San Antonio, TX",
             @"Dallas, TX", @"Detroit, MI", @"San Jose, CA", @"Indianapolis, IN",
             @"Jacksonville, FL", @"San Francisco, CA", @"Columbus, OH", @"Austin, TX",
             @"Memphis, TN", @"Baltimore, MD", @"Charlotte, ND", @"Fort Worth, TX"];
    self.tableView.dataSource = self;
}

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
    DemoPrototypeCell *cell = [tableView dequeueReusableCellWithIdentifier:@"com.codepath.DemoPrototypeCell" forIndexPath:indexPath];
    NSArray *cityState = [data[indexPath.row] componentsSeparatedByString:@", "];
    cell.cityLabel.text = cityState.firstObject;
    cell.stateLabel.text = cityState.lastObject;
    return cell;
}

- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section{
    return data.count;
}
@end

Putting everything together we get a table that looks like this:

Table With Custom Cells

Creating a separate NIB for your cell

There may be times when you do not want to use prototype cells, but still want to use Interface Builder to layout the design of your custom cell. For example, you may be working on a project without storyboards or you may want to isolate your custom cell's complexity from the rest of your storyboard. In these cases, you will create a separate Interface Builder file (NIB) to contain your custom cell's UI template.

NB: Technically NIB and XIB are different formats that both store descriptions of UI templates created with Interface Builder. The NIB format is largely deprecated except in the names of classes and methods in UIKit. Most files you create with Interface Builder will have the .xib extension. We'll use the two names interchangeably throughout this guide.

The procedure in for working with a separate NIB is almost the same as working with prototype cells. You still design your cell in Interface Builder and associate it with a custom cell class that inherits from UITableViewCell. The only difference is that you must now explicitly load your NIB and register it for reuse.

You can create your NIB as you would any other view by going to File -> New -> File... -> iOS -> User Interface -> View and then later create a separate class and associate your Interface Builder view with your class by setting the Custom Class property as you did with the prototype cell.

However, most of the time you will want to create your NIB and custom class at once by selecting File -> New -> File... -> iOS -> Source -> Cocoa Touch Class. You should then create your class as a subclass of UITableViewCell and tick the box marked Also create XIB file. This will create a .xib and .swift file and automatically sets the Custom Class property of your table view cell to be the class you just created.

You can now open the .xib file in Interface Builder, edit your view and connect IBOutlets to your custom class using the Assistant Editor (tuxedo) as you would any other view.

You do not need to set the reuse identifier attribute in Interface Builder as we did for our prototype cell. This is because once you are ready to use your new cell you must explicitly load the NIB and register it for reuse in your view controller:

import UIKit

class ViewController: UIViewController, UITableViewDataSource {
    @IBOutlet weak var tableView: UITableView!

    let data = ["New York, NY", "Los Angeles, CA", "Chicago, IL", "Houston, TX",
        "Philadelphia, PA", "Phoenix, AZ", "San Diego, CA", "San Antonio, TX",
        "Dallas, TX", "Detroit, MI", "San Jose, CA", "Indianapolis, IN",
        "Jacksonville, FL", "San Francisco, CA", "Columbus, OH", "Austin, TX",
        "Memphis, TN", "Baltimore, MD", "Charlotte, ND", "Fort Worth, TX"]

    override func viewDidLoad() {
        super.viewDidLoad()
        tableView.dataSource = self
        let cellNib = UINib(nibName: "DemoNibTableViewCell", bundle: Bundle.main)
        tableView.register(cellNib, forCellReuseIdentifier: "com.codepath.DemoNibTableViewCell")
    }

    func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
        let cell = tableView.dequeueReusableCell(withIdentifier: "com.codepath.DemoNibTableViewCell", for: indexPath) as! DemoNibTableViewCell
        let cityState = data[indexPath.row].components(separatedBy: ", ")
        cell.cityLabel.text = cityState.first
        cell.stateLabel.text = cityState.last
        return cell
    }

    func tableView(_ tableView: UITableView, numberOfRowsInSection section: Int) -> Int {
        return data.count
    }
}

//  ViewController.m

#import "ViewController.h"
#import "DemoNibTableViewCell.h"

@implementation ViewController

NSArray *data;

- (void)viewDidLoad {
    [super viewDidLoad];
    data = @[@"New York, NY", @"Los Angeles, CA", @"Chicago, IL", @"Houston, TX",
             @"Philadelphia, PA", @"Phoenix, AZ", @"San Diego, CA", @"San Antonio, TX",
             @"Dallas, TX", @"Detroit, MI", @"San Jose, CA", @"Indianapolis, IN",
             @"Jacksonville, FL", @"San Francisco, CA", @"Columbus, OH", @"Austin, TX",
             @"Memphis, TN", @"Baltimore, MD", @"Charlotte, ND", @"Fort Worth, TX"];
    self.tableView.dataSource = self;
    UINib *cellNib = [UINib nibWithNibName:@"DemoNibTableViewCell" bundle: NSBundle.mainBundle];
    [self.tableView registerNib:cellNib forCellReuseIdentifier:@"com.codepath.DemoNibTableViewCell"];
}

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
    DemoNibTableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:@"com.codepath.DemoNibTableViewCell" forIndexPath:indexPath];
    NSArray *cityState = [data[indexPath.row] componentsSeparatedByString:@", "];
    cell.cityLabel.text = cityState.firstObject;
    cell.stateLabel.text = cityState.lastObject;
    return cell;
}

- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section{
    return data.count;
}

@end

By default, your NIB will be in the main resource bundle, although you may change this in larger projects by editing your build steps. The code in viewDidLoad loads your NIB by creating an instance of UINib and registers it for reuse with the provided reuse identifier.

Laying out your cell programmatically

Finally, you may work with projects that do not use Interface Builder at all. In this case, you must lay out your custom cell programmatically. Create a custom cell class that subclasses UITableViewCell, but be sure not to tick the Also create XIB file checkbox.

In order to be able to register your custom cell for reuse, you must implement the init(style:reuseIdentifier:) method since this is the one that will be called by the UITableView when instantiating cells. As with any other UIView, you can also take the advantage of other entry points in the view's lifecycle (e.g. drawRect:) when programming your custom cell.

Once you are ready to use the cell, you must then register your custom cell class for reuse in your view controller similarly to how we registered the NIB for reuse above:

import UIKit

class DemoProgrammaticTableViewCell: UITableViewCell {
    let cityLabel = UILabel(), stateLabel = UILabel()

    override init(style: UITableViewCellStyle, reuseIdentifier: String?) {
        super.init(style: style, reuseIdentifier: reuseIdentifier)
        initViews()
    }
    
    required init(coder aDecoder: NSCoder) {
        super.init(coder: aDecoder)!
        initViews()
    }
    
    func initViews() {
        let (stateRect, cityRect) = frame.insetBy(dx: 10, dy: 10).divided(atDistance: 40, from:.maxXEdge)
        cityLabel.frame = cityRect
        stateLabel.frame = stateRect
        addSubview(cityLabel)
        addSubview(stateLabel)
    }
}

//  DemoProgrammaticTableViewCell.h

#import <UIKit/UIKit.h>

@interface DemoProgrammaticTableViewCell : UITableViewCell

@property (nonatomic, strong) UILabel *cityLabel;
@property (nonatomic, strong) UILabel *stateLabel;

@end

//  DemoProgrammaticTableViewCell.m

#import "DemoProgrammaticTableViewCell.h"

@implementation DemoProgrammaticTableViewCell

- (instancetype)initWithStyle:(UITableViewCellStyle)style reuseIdentifier:(NSString *)reuseIdentifier {
    self = [super initWithStyle:style reuseIdentifier:reuseIdentifier];
    if(self){
        [self initViews];
    }
    return self;
}

- (instancetype)initWithCoder:(NSCoder *)aDecoder{
    self = [super initWithCoder:aDecoder];
    if(self){
        [self initViews];
    }
    return self;
}

- (void)initViews {
    CGRect sourceRect = CGRectInset(self.frame, 10, 10);
    CGRect cityRect;
    CGRect stateRect;
    CGRectDivide(sourceRect, &stateRect, &cityRect, 40, CGRectMaxXEdge);
    self.cityLabel = [[UILabel alloc] initWithFrame:cityRect];
    self.stateLabel = [[UILabel alloc] initWithFrame:stateRect];
    [self addSubview:self.cityLabel];
    [self addSubview:self.stateLabel];
}
@end

Then you would use this custom table view cell in your view controller:

import UIKit

class ViewController: UIViewController, UITableViewDataSource {
    @IBOutlet weak var tableView: UITableView!

    let data = ["New York, NY", "Los Angeles, CA", "Chicago, IL", "Houston, TX",
        "Philadelphia, PA", "Phoenix, AZ", "San Diego, CA", "San Antonio, TX",
        "Dallas, TX", "Detroit, MI", "San Jose, CA", "Indianapolis, IN",
        "Jacksonville, FL", "San Francisco, CA", "Columbus, OH", "Austin, TX",
        "Memphis, TN", "Baltimore, MD", "Charlotte, ND", "Fort Worth, TX"]

    override func viewDidLoad() {
        super.viewDidLoad()
        tableView.dataSource = self
        tableView.register(DemoProgrammaticTableViewCell.self, forCellReuseIdentifier: "com.codepath.DemoProgrammaticCell")
    }

    func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
        let cell = tableView.dequeueReusableCell(withIdentifier: "com.codepath.DemoProgrammaticCell", for: indexPath) as! DemoProgrammaticTableViewCell
        let cityState = data[indexPath.row].components(separatedBy: ", ")
        cell.cityLabel.text = cityState.first
        cell.stateLabel.text = cityState.last
        return cell
    }

    func tableView(_ tableView: UITableView, numberOfRowsInSection section: Int) -> Int {
        return data.count
    }
}

//  ViewController.m

#import "ViewController.h"
#import "DemoProgrammaticTableViewCell.h"

@implementation ViewController

NSArray *data;

- (void)viewDidLoad {
    [super viewDidLoad];
    data = @[@"New York, NY", @"Los Angeles, CA", @"Chicago, IL", @"Houston, TX",
             @"Philadelphia, PA", @"Phoenix, AZ", @"San Diego, CA", @"San Antonio, TX",
             @"Dallas, TX", @"Detroit, MI", @"San Jose, CA", @"Indianapolis, IN",
             @"Jacksonville, FL", @"San Francisco, CA", @"Columbus, OH", @"Austin, TX",
             @"Memphis, TN", @"Baltimore, MD", @"Charlotte, ND", @"Fort Worth, TX"];
    self.tableView.dataSource = self;
    [self.tableView registerClass:[DemoProgrammaticTableViewCell class] forCellReuseIdentifier:@"com.codepath.DemoProgrammaticCell"];
}

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
    DemoProgrammaticTableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:@"com.codepath.DemoProgrammaticCell" forIndexPath:indexPath];
    NSArray *cityState = [data[indexPath.row] componentsSeparatedByString:@", "];
    cell.cityLabel.text = cityState.firstObject;
    cell.stateLabel.text = cityState.lastObject;
    return cell;
}

- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section{
    return data.count;
}

@end

Setting the height of rows in a table

Depending on design you may want the height of rows in your table to be fixed across all cells or to vary depending on the content of the cells. There are a few pitfalls to aware of when manipulating the height of rows in a table.

One of the implementation strategies that keeps UITableViews performant is avoiding instantiating and laying out cells that are not currently on the screen. However, in order to compute some geometries (e.g. how long the scrollbar segment is and how quickly it scrolls down your screen), iOS needs to have at least an estimate of the total size of your table. Thus one of the goals when specifying the height of your rows is to defer if possible performing the layout and configuration logic for each cell until it needs to appear on the screen.

Fixed row height

If you want all the cells in your table to the same height you should set the rowHeight property on your UITableView. You should not implement the heightForRowAtIndexPath: method in your UITableViewDelegate.

class ViewController: UIViewController, UITableViewDataSource {
    @IBOutlet weak var tableView: UITableView!

    override func viewDidLoad() {
        super.viewDidLoad()
        tableView.dataSource = self
        tableView.rowHeight = 100
    }

    ...
}

//  ViewController.m

#import "ViewController.h"

@implementation ViewController

- (void)viewDidLoad {
    [super viewDidLoad];
    self.tableView.dataSource = self;
    self.tableView.rowHeight = 100;
}
   
 ...

@end

Variable row height

There are two ways to have different row heights on a per cell basis. If project is targeted only for iOS 8 and above, you can simply have Auto Layout adjust your row heights as necessary. In other cases, you will need to manually compute the height of each row in your UITableViewDelegate.

Setting the estimated row height

One way to help iOS defer computing the height of each row until the user scrolls the table is to set the estimatedRowHeight property on your UITableView to the height you expect a typical cell to have. This is especially useful if you have a large number of rows and are relying on Auto Layout to resolve your row heights or if computing the height of each row is a non-trivial operation.

class ViewController: UIViewController, UITableViewDataSource {
    @IBOutlet weak var tableView: UITableView!

    override func viewDidLoad() {
        super.viewDidLoad()
        tableView.dataSource = self
        tableView.estimatedRowHeight = 100
    }

    ...
}

//  ViewController.m

#import "ViewController.h"

@implementation ViewController

- (void)viewDidLoad {
    [super viewDidLoad];
    self.tableView.dataSource = self;
    self.tableView.estimatedRowHeight = 100;
}
   
 ...

@end

If your estimate is wildly incorrect or if you have extremely variable row heights, you may find the behavior and sizing of the scroll bar to be less than satisfactory. In this case, you may want to implement the estimatedHeightForRowAtIndexPath: method in your UITableViewDelegate. This is rare in practice and is only useful if you have a way of estimating the individual row heights that are significantly faster than computing the exact height.

Automatically resizing rows (iOS 8+)

If you are targeting exclusively iOS 8 and above you can take advantage of a new feature that has Auto Layout compute the height of rows for you. You should add Auto Layout constraints to your cell's content view so that the total height of the content view is driven by the intrinsic content size of your variable height elements (e.g. labels). You simply need then to set your UITableView's rowHeight property to the value UITableViewAutomaticDimension and provide an estimated row height.

import UIKit

class ViewController: UIViewController, UITableViewDataSource {
    @IBOutlet weak var tableView: UITableView!

    override func viewDidLoad() {
        super.viewDidLoad()
        tableView.dataSource = self
        tableView.estimatedRowHeight = 100
        tableView.rowHeight = UITableViewAutomaticDimension
    }
    ...
}

//  ViewController.m

#import "ViewController.h"

@implementation ViewController
...

- (void)viewDidLoad {
    [super viewDidLoad];
    self.tableView.dataSource = self;
    self.tableView.estimatedRowHeight = 100;
    self.tableView.rowHeight = UITableViewAutomaticDimension;
}
   
 ...

@end

Manually computing row heights

In other situations, you will need to manually compute the height of each row in your table and provide it to UITableView by implementing the heightForRowAtIndexPath: method in your UITableViewDelegate.

If you are using Auto Layout, you may wish to still have Auto Layout figure out the row height for you. One way you accomplish this is to instantiate a reference cell that is not in your view hierarchy and use it to compute the height of each row after configuring it with the data for the row. You can call layoutSubviews and systemLayoutSizeFittingSize to obtain the size height that would be produced by Auto Layout. A more detailed discussion of this technique can be found here.

class ViewController: UIViewController, UITableViewDataSource, UITableViewDelegate {
    @IBOutlet weak var tableView: UITableView!

    var referenceCell: DemoNibTableViewCell!

    override func viewDidLoad() {
        super.viewDidLoad()
        tableView.dataSource = self
        tableView.delegate = self
        tableView.estimatedRowHeight = 50

        let cellNib = UINib(nibName: "DemoNibTableViewCell", bundle: Bundle.main)
        tableView.register(cellNib, forCellReuseIdentifier: "com.codepath.DemoNibTableViewCell")

        referenceCell = cellNib.instantiateWithOwner(nil, options: nil).first as DemoNibTableViewCell
        referenceCell.frame = tableView.frame // makes reference cell have the same width as the table
    }

    func tableView(_ tableView: UITableView, heightForRowAt indexPath: IndexPath) -> CGFloat {
        let cityState = data[indexPath.row].componentsSeparatedByString(", ")
        referenceCell.cityLabel.text = cityState.first
        referenceCell.stateLabel.text = cityState.last
        referenceCell.layoutSubviews()
        return referenceCell.systemLayoutSizeFittingSize(UILayoutFittingCompressedSize).height
    }

    ...
}

//  ViewController.m

#import "ViewController.h"

@implementation ViewController
...

DemoNibTableViewCell *referenceCell;

- (void)viewDidLoad {
    [super viewDidLoad];
    self.tableView.dataSource = self;
    self.tableView.estimatedRowHeight = 50;

    UINib *cellNib = [UINib nibWithNibName:@"DemoNibTableViewCell" bundle: NSBundle.mainBundle];
    [self.tableView registerNib:cellNib forCellReuseIdentifier:@"com.codepath.DemoNibTableViewCell"];
    
    referenceCell = [cellNib instantiateWithOwner:nil options:nil].firstObject;
    referenceCell.frame = self.tableView.frame;
}

- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath{
    NSArray *cityState = [data[indexPath.row] componentsSeparatedByString:@", "];
    referenceCell.cityLabel.text = cityState.firstObject;
    referenceCell.stateLabel.text = cityState.lastObject;
    [referenceCell layoutSubviews];
    return [referenceCell systemLayoutSizeFittingSize:UILayoutFittingCompressedSize].height;
}
   
 ...

@end

In some cases, the height of your cell may be entirely dominated by one or more elements so that you are able to figure out the row height by simply doing some arithmetic and without actually needing to lay out the subviews. For example, if the height of you row is determined by an image thumbnail with some padding around it, you can simply return the value of the size of the image added to the appropriate padding. In many cases, the height of your row will be determined by the height of the text in one or more labels. In these cases, you can compute the the space a piece of text will occupy without actually rendering it by calling NSString's boundingRectWithSize method. A discussion of how to do this in Swift can be found here

Cell Accessory Views

UITableViewCell and every subclass of you create comes built-in with an accessory view that can be useful for displaying a status indicator or small control to the right of your cell's main content view. If the accessory view is visible, the size content view will be shrunk to accommodate it. If you plan on using accessory views, be sure the elements in your content view are configured to properly resize when the width available to them changes.

You can use either the built-in accessory views via the accessoryType property or use any UIView by setting the accessoryView property. You should not set both properties.

Built-in accessory views

There are a few built-in accessory views that can be activated by setting the accessoryType property on your UITableViewCell. By default this value is .none. Returning to our prototype cell example, you can see what each accessory type looks like below.

import UIKit

class ViewController: UIViewController, UITableViewDataSource {
    ...

    let accessoryTypes: [UITableViewCellAccessoryType] = [.none, .DisclosureIndicator, .DetailDisclosureButton, .Checkmark, .DetailButton]

    func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
        let cell = tableView.dequeueReusableCellWithIdentifier("com.codepath.DemoPrototypeCell", forIndexPath: indexPath) as DemoPrototypeCell
        let cityState = data[indexPath.row].componentsSeparatedByString(", ")
        cell.cityLabel.text = cityState.first
        cell.stateLabel.text = cityState.last
        cell.accessoryType = accessoryTypes[indexPath.row % accessoryTypes.count]
        return cell
    }

    ...
}

//  ViewController.m

#import "ViewController.h"

@implementation ViewController
...

NSArray *accessoryTypes;

- (void)viewDidLoad {
    [super viewDidLoad];
    self.tableView.dataSource = self;
    
    ...

    accessoryTypes = @[@(UITableViewCellAccessoryNone), @(UITableViewCellAccessoryDisclosureIndicator),
                       @(UITableViewCellAccessoryDetailDisclosureButton), @(UITableViewCellAccessoryCheckmark),
                       @(UITableViewCellAccessoryDetailButton)];
}

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
    DemoPrototypeCell *cell = [tableView dequeueReusableCellWithIdentifier:@"com.codepath.DemoPrototypeCell" forIndexPath:indexPath];
  
    NSArray *cityState = [data[indexPath.row] componentsSeparatedByString:@", "];
    cell.cityLabel.text = cityState.firstObject;
    cell.stateLabel.text = cityState.lastObject;
    UITableViewCellAccessoryType accessoryType = [accessoryTypes[indexPath.row % accessoryTypes.count] intValue];
    cell.accessoryType = accessoryType;
    return cell;
}
   
 ...

@end

If you use the .DetailDisclosureButton or .DetailButton accessory types you can handle the event of a tap on your button by implementing the accessoryButtonTappedForRowWithIndexPath method in your UITableViewDelegate.

Custom accessory views

You can use any UIView—including custom ones—as an accessory view by setting the accessoryView property on your UITableViewCell. You should be aware of the same performance considerations regarding the creation of UIViews per row when using this feature. Also, note that if you want to handle any events from a custom accessory view, you will have to implement your own event handling logic (see how to propagate events below). For more complex situations, you might opt to simply include this custom "accessory view" as part of your main content view.

Setup your prototype cell as follows:

class DemoPrototypeCell: UITableViewCell {

    @IBOutlet weak var cityLabel: UILabel!
    @IBOutlet weak var stateLabel: UILabel!

    override func awakeFromNib() {
        super.awakeFromNib()
        accessoryView = UIView(frame: CGRect(x: 0, y: 0, width: 30, height: 30))
    }
}

//  DemoPrototypeCell.m

#import "DemoPrototypeCell.h"

@implementation DemoPrototypeCell

- (void)awakeFromNib {
    [super awakeFromNib];
    self.accessoryView = [[UIView alloc]initWithFrame:CGRectMake(0, 0, 30, 30)];
}

@end

Next, modify the accessory view's background color in the view controller:

import UIKit

class ViewController: UIViewController, UITableViewDataSource {
    ...
    func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
        let cell = tableView.dequeueReusableCellWithIdentifier("com.codepath.DemoPrototypeCell", forIndexPath: indexPath) as DemoPrototypeCell
        let cityState = data[indexPath.row].componentsSeparatedByString(", ")
        cell.cityLabel.text = cityState.first
        cell.stateLabel.text = cityState.last

        let greyLevel = CGFloat(indexPath.row % 5) / 5.0
        cell.accessoryView?.backgroundColor = UIColor(white: greyLevel, alpha: 1)

        return cell
    }
    ...
}

//  ViewController.m

#import "ViewController.h"

@implementation ViewController

...

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
    DemoPrototypeCell *cell = [tableView dequeueReusableCellWithIdentifier:@"com.codepath.DemoPrototypeCell" forIndexPath:indexPath];
  
    NSArray *cityState = [data[indexPath.row] componentsSeparatedByString:@", "];
    cell.cityLabel.text = cityState.firstObject;
    cell.stateLabel.text = cityState.lastObject;
    
    CGFloat greyLevel = (indexPath.row % 5)/5.0;
    cell.accessoryView.backgroundColor = [UIColor colorWithWhite:greyLevel alpha:1];

    return cell;
}
   
 ...

@end

Working with sections

Rows in a UITableView can be grouped under section headers. You can control how many sections are in the table and how many rows are in each section by implementing the numberOfSections and the numberOfRowsInSection methods respectively in our UITableViewDataSource. You would then need your cellForRowAtIndexPath implementation to support multiple sections and return the correct row under the correct section specified by the indexPath.

Section header views

You can control the view displayed for a section header by implementing viewForHeaderInSection and returning a UITableViewHeaderFooterView configured with data specific to the section. Although, you might opt to implement the simpler titleForHeaderInSection: if you are OK with the default styling.

Each of the concepts and methods we discussed for using UITableViewCells has an analogue for UITableViewHeaderFooterViews.

registerNib:forHeaderFooterViewReuseIdentifier: and registerClass:forHeaderFooterViewReuseIdentifier: can be used to register UITableViewHeaderFooterViews for reuse
dequeueReusableHeaderFooterViewWithIdentifier: is used to obtain a UITableViewHeaderFooterView instance from the reusable views pool
We can implement custom header views by creating a NIB and subclassing UITableViewHeaderFooterViews.
We can customize the height of our header views by implementing heightForHeaderInSection:

NB: The above discussion regarding section headers applies equally to footers by replacing "header" with "footer" throughout.

import UIKit

class ViewController: UIViewController, UITableViewDataSource, UITableViewDelegate {
    @IBOutlet weak var tableView: UITableView!

    let data = [("Arizona", ["Phoenix"]),
        ("California", ["Los Angeles", "San Francisco", "San Jose", "San Diego"]),
        ("Florida", ["Miami", "Jacksonville"]),
        ("Illinois", ["Chicago"]),
        ("New York", ["Buffalo", "New York"]),
        ("Pennsylvania", ["Pittsburg", "Philadelphia"]),
        ("Texas", ["Houston", "San Antonio", "Dallas", "Austin", "Fort Worth"])]

    let CellIdentifier = "TableViewCell", HeaderViewIdentifier = "TableViewHeaderView"

    override func viewDidLoad() {
        super.viewDidLoad()
        tableView.dataSource = self
        tableView.delegate = self
        tableView.register(UITableViewCell.self, forCellReuseIdentifier: CellIdentifier)
        tableView.register(UITableViewHeaderFooterView.self, forHeaderFooterViewReuseIdentifier: HeaderViewIdentifier)
    }

    func numberOfSections(in tableView: UITableView) -> Int {
        return data.count
    }

    func tableView(_ tableView: UITableView, numberOfRowsInSection section: Int) -> Int {
        return data[section].1.count
    }

    func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
        let cell = tableView.dequeueReusableCellWithIdentifier(CellIdentifier, forIndexPath: indexPath) as UITableViewCell
        let citiesInSection = data[indexPath.section].1
        cell.textLabel?.text = citiesInSection[indexPath.row]
        return cell
    }

    func tableView(_ tableView: UITableView, viewForHeaderInSection section: Int) -> UIView? {
        let header = tableView.dequeueReusableHeaderFooterViewWithIdentifier(HeaderViewIdentifier) as! UITableViewHeaderFooterView
        header.textLabel.text = data[section].0
        return header
    }

    func tableView(_ tableView: UITableView, heightForHeaderInSection section: Int) -> CGFloat {
        return 30
    }
}

//  ViewController.h

#import <UIKit/UIKit.h>

@interface ViewController : UIViewController <UITableViewDataSource>

@property (weak, nonatomic) IBOutlet UITableView *tableView;

@end


//  ViewController.m

#import "ViewController.h"

@implementation ViewController

NSArray *data;
NSString *CellIdentifier = @"TableViewCell";
NSString *HeaderViewIdentifier = @"TableViewHeaderView";

- (void)viewDidLoad {
    [super viewDidLoad];
    self.tableView.dataSource = self;
    self.tableView.delegate = self;

    data = @[@[@"Arizona", @[@"Phoenix"]], @[@"California", @[@"Los Angeles", @"San Francisco", @"San Jose", @"San Diego"]], @[@"Florida", @[@"Miami", @"Jacksonville"]], @[@"Illinois", @[@"Chicago"]], @[@"New York", @[@"Buffalo", @"New York"]], @[@"Pennsylvania", @[@"Pittsburg", @"Philadelphia"]], @[@"Texas", @[@"Houston", @"San Antonio", @"Dallas", @"Austin", @"Fort Worth"]]];
    
    [self.tableView registerClass:[UITableViewCell class] forCellReuseIdentifier:CellIdentifier];
    [self.tableView registerClass:[UITableViewHeaderFooterView class] forHeaderFooterViewReuseIdentifier:HeaderViewIdentifier];
}
   
- (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView {
    return data.count;
}

- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section {
    return [[data[section] lastObject] count];
}

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier forIndexPath:indexPath];
    NSArray *citiesInSection = [data[indexPath.section] lastObject];
    cell.textLabel.text = citiesInSection[indexPath.row];
    return cell;
}

- (UIView *)tableView:(UITableView *)tableView viewForHeaderInSection:(NSInteger)section {
    UITableViewHeaderFooterView *header = [tableView dequeueReusableHeaderFooterViewWithIdentifier:HeaderViewIdentifier];
    header.textLabel.text = [data[section] firstObject];
    return header;
}

- (CGFloat)tableView:(UITableView *)tableView heightForHeaderInSection:(NSInteger)section {
    return 30;
}

@end

Plain vs Grouped style

The above code can produce two different behaviors depending on whether our UITableView is configured to have the Plain style or the Grouped style. Plain is on the left and Grouped is on the right below. Notice that the section header sticks at the top of the table while we are still scrolling within the section.

The table view section style can be changed in Interface Builder under the Attributes Inspector or can be set when the table view is initialized if it is created programmatically.

Handling row selection

UITableView and UITableViewCell have several built-in facilities for responding to a cell being selected a cell and changing a cell's visual appearance when it is selected.

Handling cell selection at the table level

To respond to a cell being selected you can implement didSelectRowAtIndexPath: in your UITableViewDelegate. Here is one way we can implement a simple checklist:

import UIKit

class ViewController: UIViewController, UITableViewDataSource, UITableViewDelegate {
    @IBOutlet weak var tableView: UITableView!

    let CellIdentifier = "TableCellView"

    let data = ["New York, NY", "Los Angeles, CA", "Chicago, IL", "Houston, TX",
        "Philadelphia, PA", "Phoenix, AZ", "San Diego, CA", "San Antonio, TX",
        "Dallas, TX", "Detroit, MI", "San Jose, CA", "Indianapolis, IN",
        "Jacksonville, FL", "San Francisco, CA", "Columbus, OH", "Austin, TX",
        "Memphis, TN", "Baltimore, MD", "Charlotte, ND", "Fort Worth, TX"]

    var checked: [Bool]!

    override func viewDidLoad() {
        super.viewDidLoad()

        checked = [Bool](count: data.count, repeatedValue: false)
        tableView.dataSource = self
        tableView.delegate = self
        tableView.register(UITableViewCell.self, forCellReuseIdentifier: CellIdentifier)
    }

    func tableView(_ tableView: UITableView, didSelectRowAt indexPath: IndexPath) {
        tableView.deselectRowAtIndexPath(indexPath, animated: true)
        checked[indexPath.row] = !checked[indexPath.row]
        tableView.reloadRowsAtIndexPaths([indexPath], withRowAnimation: .Automatic)
    }

    func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
        let cell = tableView.dequeueReusableCellWithIdentifier(CellIdentifier, forIndexPath: indexPath)
        cell.textLabel?.text = data[indexPath.row]
        if checked[indexPath.row] {
            cell.accessoryType = .Checkmark
        } else {
            cell.accessoryType = .none
        }
        return cell
    }

    func tableView(_ tableView: UITableView, numberOfRowsInSection section: Int) -> Int {
        return data.count
    }
}

//  ViewController.h

#import <UIKit/UIKit.h>

@interface ViewController : UIViewController <UITableViewDataSource, UITableViewDelegate>

@property (weak, nonatomic) IBOutlet UITableView *tableView;

@end

//  ViewController.m

#import "ViewController.h"

@implementation ViewController

NSArray *data;
NSString *CellIdentifier = @"TableCellView";
bool checked[];

- (void)viewDidLoad {
    [super viewDidLoad];

    data = @[@"New York, NY", @"Los Angeles, CA", @"Chicago, IL", @"Houston, TX",
             @"Philadelphia, PA", @"Phoenix, AZ", @"San Diego, CA", @"San Antonio, TX",
             @"Dallas, TX", @"Detroit, MI", @"San Jose, CA", @"Indianapolis, IN",
             @"Jacksonville, FL", @"San Francisco, CA", @"Columbus, OH", @"Austin, TX",
             @"Memphis, TN", @"Baltimore, MD", @"Charlotte, ND", @"Fort Worth, TX"];

    checked[data.count] = false;
    self.tableView.dataSource = self;
    self.tableView.delegate = self;
}

- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
    [tableView deselectRowAtIndexPath:indexPath animated:true];
    checked[indexPath.row] = !checked[indexPath.row];
    [tableView reloadRowsAtIndexPaths:[[NSArray alloc] initWithObjects: indexPath, nil] withRowAnimation:UITableViewRowAnimationAutomatic];
}

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier forIndexPath:indexPath];
    cell.textLabel.text = data[indexPath.row];
    if (checked[indexPath.row]){
        cell.accessoryType = UITableViewCellAccessoryCheckmark;
    }
    else{
        cell.accessoryType = UITableViewCellAccessoryNone;
    }
    return cell;
}

- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section {
    return data.count;
}

@end

Notice that we deselect the cell immediately after selection event. Selection is not a good way to store or indicate state. Also, notice that we reload the row once we've modified our checked data model. This necessary so that the table knows to reconfigure and rerender the corresponding cell to have a checkmark. More info on handling updates to your data can be found below.

Responding to the selection event at the cell level

There are several ways the UITableViewCell itself can respond to a selection event. The most basic is setting the selectionStyle. In particular, the value .none can be useful here—though you should set the flag allowsSelection on your UITableView if you wish to disable selection globally.

You can have a cell change its background when selected by setting the selectedBackgroundView property. You can also respond programmatically to the selection event by overriding the setSelected method in your custom cell class.

import UIKit

class DemoProgrammaticTableViewCell: UITableViewCell {

    override init(style: UITableViewCellStyle, reuseIdentifier: String?) {
        super.init(style: style, reuseIdentifier: reuseIdentifier)
        initViews()

    }

    required init(coder aDecoder: NSCoder) {
        super.init(coder: aDecoder)
        initViews()
    }

    func initViews() {
        selectedBackgroundView = UIView(frame: frame)
        selectedBackgroundView.backgroundColor = UIColor(red: 0.5, green: 0.7, blue: 0.9, alpha: 0.8)
    }

    override func setSelected(selected: Bool, animated: Bool) {
        super.setSelected(selected, animated: animated)
        let fontSize: CGFloat = selected ? 34.0 : 17.0
        self.textLabel?.font = self.textLabel?.font.fontWithSize(fontSize)
    }
}

Customizing the cell selection effect

When a user taps on one of the cells in your tableView, there are a couple of events that fire:

Highlighted => This happens when the user first touches down on the cell (touch down).
Selected => This happens when the user releases his or her finger from the cell (touch up).

In iOS, you can customize what happens for both of these events.

To customize what happens for the Selected event, you can use one of the following options:

Set the cell selectionStyle property. This allows you to set the color to gray or have no color at all.
```
// No color when the user selects cell
cell.selectionStyle = .none
```

Set a custom selectedBackgroundView. This gives you full control to create a view and set it as the cell's selectedBackgroundView.

// Use a red color when the user selects the cell
let backgroundView = UIView()
backgroundView.backgroundColor = UIColor.red
cell.selectedBackgroundView = backgroundView

Example: load data from a REST API and display it in your table

In order to discuss some topics relating to working with tables that load data from a network resource we present an example application that fetches the top stories from the New York Times' news feed and presents them to the user in a table view.

Our setup is almost the same as in the custom prototype cell example above. We've created a prototype cell and an associated custom class StoryCell that can display a single headline and possibly an associated image. We've also added a model class Story that also handles our network request and response parsing logic. More on making network requests can be found in the basic network programming guide.

Here is the view controller:

import UIKit

class ViewController: UIViewController, UITableViewDataSource {
    @IBOutlet weak var tableView: UITableView!

    var stories: [Story] = []

    override func viewDidLoad() {
        super.viewDidLoad()
        tableView.dataSource = self

        Story.fetchStories({ (stories: [Story]) -> Void in
            dispatch_async(dispatch_get_main_queue(), {
                self.stories = stories
                self.tableView.reloadData()
            })
        }, error: nil)
    }

    func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
        let cell = tableView.dequeueReusableCellWithIdentifier("StoryCell") as StoryCell
        cell.story = stories[indexPath.row]
        return cell
    }

    func tableView(_ tableView: UITableView, numberOfRowsInSection section: Int) -> Int {
        return stories.count
    }
}

Here is the table view cell defined:

import UIKit

class StoryCell: UITableViewCell {

    @IBOutlet weak var thumbnailView: UIImageView!
    @IBOutlet weak var headlineLabel: UILabel!

    var story: Story? {
        didSet {
            headlineLabel?.text = story?.headline
            headlineLabel?.sizeToFit()
        }
    }
}

Here is the model for parsing from the network:

import UIKit

private let apiKey = "53eb9541b4374660d6f3c0001d6249ca:19:70900879"
private let resourceUrl = URL(string: "http://api.nytimes.com/svc/topstories/v1/home.json?api-key=\(apiKey)")!

class Story {
    var headline: String?
    var thumbnailUrl: String?

    init(jsonResult: NSDictionary) {
        if let title = jsonResult["title"] as? String {
            headline = title
        }

        if let multimedia = jsonResult["multimedia"] as? NSArray {
            // 4th element is will contain the image of the right size
            if multimedia.count >= 4 {
                if let mediaItem = multimedia[3] as? NSDictionary {
                    if let type = mediaItem["type"] as? String {
                        if type == "image" {
                            if let url = mediaItem["url"] as? String{
                                thumbnailUrl = url
                            }
                        }
                    }
                }
            }
        }
    }

    class func fetchStories(successCallback: ([Story]) -> Void, error: ((NSError?) -> Void)?) {
        NSURLSession.sharedSession().dataTaskWithURL(resourceUrl, completionHandler: {(data, response, requestError) -> Void in
            if let requestError = requestError? {
                error?(requestError)
            } else {
                if let data = data? {
                    let json = NSJSONSerialization.JSONObjectWithData(data, options: nil, error: nil) as NSDictionary
                    if let results = json["results"] as? NSArray {
                        var stories: [Story] = []
                        for result in results as [NSDictionary] {
                            stories.append(Story(jsonResult: result))
                        }
                        successCallback(stories)
                    }
                } else {
                    // unexepected error happened
                    error?(nil)
                }
            }
        }).resume()
    }
}

Handling updates to your data

to be completed...

Animating changes

to be completed...

Adding Pull-to-Refresh

Pull-to-refresh is a ubiquitous method to update your list with the latest information. Apple provides developers with UIRefreshControl, as a standard way to implement this behavior. As UIRefreshControl is for lists, it can be used with UITableView, UICollectionView, and UIScrollView.

###Using a Basic UIRefreshControl Using a basic UIRefreshControl requires the following steps:

Initialize an instance of UIRefreshControl
Implement an action to handle updating your table view
Bind the action to the instance of UIRefreshControl
Insert the UIRefreshControl as a subview of your table view

####Initializing a UIRefreshControl In order to implement a UIRefreshControl, we need an instance of UIRefreshControl. Update the viewDidLoad function to include the following code:

override func viewDidLoad() {
    super.viewDidLoad()
	
    // Initialize a UIRefreshControl
    let refreshControl = UIRefreshControl()
}

    UIRefreshControl *refreshControl = [[UIRefreshControl alloc] init];
    [refreshControl addTarget:self action:@selector(beginRefresh:) forControlEvents:UIControlEventValueChanged];
    [self.tableView insertSubview:refreshControl atIndex:0];

Implement an action to update the list

We need to implement an action to update our list. It's common to fire a network request to get updated data, so that is shown in the example below. Note: Make sure to call tableView.reloadData and refreshControl.endRefreshing after updating the data source.

    // Makes a network request to get updated data
    // Updates the tableView with the new data
    // Hides the RefreshControl
    func refreshControlAction(_ refreshControl: UIRefreshControl) {

        // ... Create the URLRequest `myRequest` ...

        // Configure session so that completion handler is executed on main UI thread
        let session = URLSession(configuration: .default, delegate: nil, delegateQueue: OperationQueue.main)
        let task: URLSessionDataTask = session.dataTask(with: request) { (data: Data?, response: URLResponse?, error: Error?) in

            // ... Use the new data to update the data source ...

            // Reload the tableView now that there is new data
            myTableView.reloadData()

            // Tell the refreshControl to stop spinning
            refreshControl.endRefreshing()
        }
        task.resume()
    }

Bind the action to the refresh control

With the action implemented, it now needs to be bound to the UIRefreshControl so that something will happen when you pull-to-refresh.

override func viewDidLoad() {
    super.viewDidLoad()
	
    // Initialize a UIRefreshControl
    let refreshControl = UIRefreshControl()
    refreshControl.addTarget(self, action: #selector(refreshControlAction(_:)), for: UIControlEvents.valueChanged)
}

    UIRefreshControl *refreshControl = [[UIRefreshControl alloc] init];
    [refreshControl addTarget:self action:@selector(beginRefresh:) forControlEvents:UIControlEventValueChanged];
    [self.tableView insertSubview:refreshControl atIndex:0];

####Insert the refresh control into the list The UIRefreshControl now needs to be added to the table view.

override func viewDidLoad() {
    super.viewDidLoad()
	
    // Initialize a UIRefreshControl
    let refreshControl = UIRefreshControl()
    refreshControl.addTarget(self, action: #selector(refreshControlAction(_:)), for: UIControlEvents.valueChanged)
    // add refresh control to table view
    tableView.insertSubview(refreshControl, at: 0)
}

###Understanding a UIRefreshControl The UIRefreshControl is a subclass of UIView, and consequently a view, so it can be added as a subview to another view. It's behavior and interaction is already built in. UIRefreshControl is a subclass of UIControl, and pulling down on the parent view will initiate a UIControlEventValueChanged event. When the event is triggered, a bound action will be fired. In this action, we update the data source and reset the UIRefreshControl.

###Creating a custom pull-to-refresh For now, see the following [reference][customRefreshControl] [customRefreshControl]: http://www.jackrabbitmobile.com/design/ios-custom-pull-to-refresh-control/

###Gotchas The following are common mistakes:

After pulling to refresh, nothing changes? Did you forget tableView.reloadData?

Is the UI changing in a strange sequence or the wrong order? Did you update the UI on the main thread (dispatch_async(dispatch_get_main_queue()))?

###Further notes Apple documentation does specify that UIRefreshControl is only meant to be used with a UITableViewController where it is included, however, we have not seen any problems in practice before.

Because the refresh control is specifically designed for use in a table view that's managed by a table view controller, using it in a different context can result in undefined behavior.

Propagating events from within a custom cell

to be completed...

Adding Infinite Scroll

As a user is going through the table view, they will eventually reach the end. When they reach the end, the service may still have more data for them. In order to provide the user with a smooth experience, and avoid pagination, we implement infinite scrolling to a table view.

Implementing infinite scroll behavior involves the following:

Detect when to request more data
Request more data and update UI accordingly
Create a progress indicator for user to know when data is being requested
Update progress to indicate with UI when data is being requested and loaded

Here is a sample image of what we're going to make:

###Detecting when to request more data

How to bind actions to changes in scrolling

In order to detect when to request more data, we need to use the UIScrollViewDelegate. UITableView is a subclass of UIScrollView and therefore can be treated as a UIScrollView. For UIScrollView, we use the UIScrollViewDelegate to perform actions when scrolling events occur. We want to detect when a UIScrollView has scrolled, so we use the method scrollViewDidScroll.

Add UIScrollViewDelegate to the protocol list and add the scrollViewDidScroll function:

class ViewController: UIViewController, UITableViewDelegate, UITableViewDataSource, UIScrollViewDelegate {
	
    // ...

    func scrollViewDidScroll(_ scrollView: UIScrollView) {
        // Handle scroll behavior here
    }
}

Understanding `scrollViewDidScroll`

When a user scrolls down, the UIScrollView continuously fires scrollViewDidScroll after the UIScrollView has changed. This means that whatever code is inside scrollViewDidScroll will repeatedly fire. In order to avoid 10s or 100s of requests to the server, we need to indicate when the app has already made a request to the server.

Create a flag called isMoreDataLoading, and add a check in scrollViewDidScroll:

class ViewController: UIViewController, UITableViewDelegate, UITableViewDataSource, UIScrollViewDelegate {
	
    var isMoreDataLoading = false
	
    func scrollViewDidScroll(_ scrollView: UIScrollView) {
        if (!isMoreDataLoading) {
            isMoreDataLoading = true
		
            // ... Code to load more results ...

        }
    }
}

Define the conditions for requesting more data

Ideally, for infinite scrolling, we want to load more results before the user reaches the end of the existing content, and therefore would start loading at some point past halfway. However, for this specific tutorial, we will load more results when the user reaches near the end of the existing content.

We need to know how far down a user has scrolled in the UITableView. The property contentOffset of UIScrollView tells us how far down or to the right the user has scrolled in a UIScrollView. The property contentSize tells us how much total content there is in a UIScrollView. We will define a variable scrollOffsetThreshold for when we want to trigger requesting more data - one screen length before the end of the results.

func scrollViewDidScroll(_ scrollView: UIScrollView) {
    if (!isMoreDataLoading) {
        // Calculate the position of one screen length before the bottom of the results
        let scrollViewContentHeight = tableView.contentSize.height
        let scrollOffsetThreshold = scrollViewContentHeight - tableView.bounds.size.height
		
        // When the user has scrolled past the threshold, start requesting
        if(scrollView.contentOffset.y > scrollOffsetThreshold && tableView.isDragging) {
            isMoreDataLoading = true
	
            // ... Code to load more results ...
        }
    }
}

Request more data

Define a separate function to request more data, and call this function in scrollViewDidScroll:

func loadMoreData() {

    // ... Create the NSURLRequest (myRequest) ...

    // Configure session so that completion handler is executed on main UI thread
    let session = URLSession(configuration: URLSessionConfiguration.default,
                            delegate:nil,
                            delegateQueue:OperationQueue.main
    )
    let task : URLSessionDataTask = session.dataTask(with: myRequest, completionHandler: { (data, response, error) in
    
        // Update flag
        self.isMoreDataLoading = false

        // ... Use the new data to update the data source ...
			
        // Reload the tableView now that there is new data
        self.myTableView.reloadData()
    })
    task.resume()
}

func scrollViewDidScroll(_ scrollView: UIScrollView) {
    if (!isMoreDataLoading) {
        // Calculate the position of one screen length before the bottom of the results
        let scrollViewContentHeight = tableView.contentSize.height
        let scrollOffsetThreshold = scrollViewContentHeight - tableView.bounds.size.height
		
        // When the user has scrolled past the threshold, start requesting
        if(scrollView.contentOffset.y > scrollOffsetThreshold && tableView.isDragging) {
	
            isMoreDataLoading = true
			
            // Code to load more results
            loadMoreData()
        }
    }
}

When you run the app, you should see new data load into the table view, each time you reach the bottom. But there's a problem: there's no indicator to the user that anything is happening.

Creating a progress indicator

To indicate to the user that something is happening, we need to create a progress indicator.

There are a number of different ways a progress indicator can be added. Many cocoapods are available to provide this. However, for this guide, we'll create a custom view class and add it to the tableView's view hierarchy. Below is the code to create a custom view class that can be used as a progress indicator.

We make use of Apple's UIActivityIndicatorView to show a loading spinner, that can be switched on and off.

Spinner

class InfiniteScrollActivityView: UIView {
    var activityIndicatorView: UIActivityIndicatorView = UIActivityIndicatorView()
    static let defaultHeight:CGFloat = 60.0
    
    required init?(coder aDecoder: NSCoder) {
        super.init(coder: aDecoder)
        setupActivityIndicator()
    }
    
    override init(frame aRect: CGRect) {
        super.init(frame: aRect)
        setupActivityIndicator()
    }
    
    override func layoutSubviews() {
        super.layoutSubviews()
        activityIndicatorView.center = CGPoint(x: self.bounds.size.width/2, y: self.bounds.size.height/2)
    }
    
    func setupActivityIndicator() {
        activityIndicatorView.activityIndicatorViewStyle = .gray
        activityIndicatorView.hidesWhenStopped = true
        self.addSubview(activityIndicatorView)
    }
    
    func stopAnimating() {
        self.activityIndicatorView.stopAnimating()
        self.isHidden = true
    }
    
    func startAnimating() {
        self.isHidden = false
        self.activityIndicatorView.startAnimating()
    }
}

Update progress to indicate with UI when data is being requested

Now that we have a progress indicator, we need to load it when more data is being requested from the server.

Add a loading view to your view controller

For this example, use the class InfiniteScrollActivityView, and add it to your view controller to use for later.

class ViewController: UIViewController, UITableViewDelegate, UITableViewDataSource, UIScrollViewDelegate {
	
    var isMoreDataLoading = false
    var loadingMoreView:InfiniteScrollActivityView?

    // ...
}

In viewDidLoad, initialize and add the loading indicator to the tableView's view hierarchy. Then add new insets to allow room for seeing the loading indicator at the bottom of the tableView.

override func viewDidLoad() {
    super.viewDidLoad()

    // Set up Infinite Scroll loading indicator
    let frame = CGRect(x: 0, y: tableView.contentSize.height, width: tableView.bounds.size.width, height: InfiniteScrollActivityView.defaultHeight)
    loadingMoreView = InfiniteScrollActivityView(frame: frame)
    loadingMoreView!.isHidden = true
    tableView.addSubview(loadingMoreView!)
	
    var insets = tableView.contentInset
    insets.bottom += InfiniteScrollActivityView.defaultHeight
    tableView.contentInset = insets
}

Update the scrollViewDidScroll function to load the indicator:

func scrollViewDidScroll(_ scrollView: UIScrollView) {
    if (!isMoreDataLoading) {
        // Calculate the position of one screen length before the bottom of the results
        let scrollViewContentHeight = tableView.contentSize.height
        let scrollOffsetThreshold = scrollViewContentHeight - tableView.bounds.size.height
		
        // When the user has scrolled past the threshold, start requesting
        if(scrollView.contentOffset.y > scrollOffsetThreshold && tableView.isDragging) {
            isMoreDataLoading = true

            // Update position of loadingMoreView, and start loading indicator
            let frame = CGRect(x: 0, y: tableView.contentSize.height, width: tableView.bounds.size.width, height: InfiniteScrollActivityView.defaultHeight)
            loadingMoreView?.frame = frame
            loadingMoreView!.startAnimating()

            // Code to load more results
            loadMoreData()		
        }
    }
}

Finally, update the loadMoreData function to stop the indicator, when the request has finished downloading:

func loadMoreData() {

    // ... Create the NSURLRequest (myRequest) ...
    // Configure session so that completion handler is executed on main UI thread
    let session = URLSession(configuration: URLSessionConfiguration.default,
                            delegate:nil,
                            delegateQueue:OperationQueue.main
    )
    
    let task : URLSessionDataTask = session.dataTask(with: myRequest, completionHandler: { (data, response, error) in

        // Update flag
        self.isMoreDataLoading = false

        // Stop the loading indicator
        self.loadingMoreView!.stopAnimating()

        // ... Use the new data to update the data source ...

        // Reload the tableView now that there is new data
        self.myTableView.reloadData()
    })
    task.resume()

}

Credits

Thanks to SVPullToRefresh for providing source code and a general flow to follow for this basic version of an infinite scroll.

Using a cocoapod to implement instead

Infinite Scroll can also be implemented with the following cocoapod: SVPullToRefresh

Common Gotchas

To be added...

Editing mode

to be completed...

Common Questions

How do you remove the separator inset?

First, set the separator inset to zero on the tableview.

class MyTableViewController: UITableViewController {
    override func viewDidLoad() {
        super.viewDidLoad()
        self.tableView.separatorInset = UIEdgeInsetsZero
    }
}

Then, in your cell, disable the margins, and the margins it may inherit from parent views.

class MyTableViewCell: UITableViewCell
    override func awakeFromNib() {
        super.awakeFromNib()
        self.layoutMargins = UIEdgeInsetsZero
        self.preservesSuperviewLayoutMargins = false
    }
}

Hello Manh Okne

Table View Guide

Overview

Your first UITableView

UITableView vs UITableViewController

The dataSource and delegate properties

Reusing UITableViewCells

Notes about the cell reuse pattern

Custom cells

Built-in cell styles

Creating customized cells

Using prototype cells

Creating a separate NIB for your cell

Laying out your cell programmatically

Setting the height of rows in a table

Fixed row height

Variable row height

Setting the estimated row height

Automatically resizing rows (iOS 8+)

Manually computing row heights

Cell Accessory Views

Built-in accessory views

Custom accessory views

Working with sections

Section header views

Plain vs Grouped style

Handling row selection

Handling cell selection at the table level

Responding to the selection event at the cell level

Customizing the cell selection effect

Example: load data from a REST API and display it in your table

Handling updates to your data

Animating changes

Adding Pull-to-Refresh

Implement an action to update the list

Bind the action to the refresh control

Propagating events from within a custom cell

Adding Infinite Scroll

How to bind actions to changes in scrolling

Understanding scrollViewDidScroll

Define the conditions for requesting more data

Request more data

Creating a progress indicator

Update progress to indicate with UI when data is being requested

Add a loading view to your view controller

Credits

Using a cocoapod to implement instead

Common Gotchas

Editing mode

Common Questions

How do you remove the separator inset?

Clone this wiki locally

Your first `UITableView`

`UITableView` vs `UITableViewController`

The `dataSource` and `delegate` properties

Reusing `UITableViewCells`

Understanding `scrollViewDidScroll`