Skip to content

Latest commit

 

History

History
95 lines (63 loc) · 6.02 KB

README.md

File metadata and controls

95 lines (63 loc) · 6.02 KB
Raw

Devices

Hostname CPU RAM Details
giant i9-12900K (x64) 64 GB (DDR5) My main home workstation, comes with Nvidia RTX3090.
surface i7-8650U (x64) 16 GB Travel laptop, Surface Book 2, comes with internal and external GPU, I don't use the external Nvidia GPU though.
rzr i7-6900K (x64) 32 GB K8s master node with GTX 1080 Ti GPU.
a21 i3-10100F (x64) 32 GB K8s master node.
smol i5-10210U (x64) 16 GB K8s master node.
opi1 RK3588S (Arm64) 16 GB Orange Pi 5, k8s worker node.
opi2 RK3588S (Arm64) 16 GB Orange Pi 5, k8s worker node.
opi3 RK3588S (Arm64) 16 GB Orange Pi 5, k8s worker node.
opi4 RK3588S (Arm64) 16 GB Orange Pi 5, k8s worker node.

Outline

My home infrastructure is composed of two types of devices, ones which are part of kubernetes cluster and desktop computers. Desktop come with

Note

System Information:

  • Window Manager: Hyprland
  • Shell: ZSH
  • Terminal: Foot
  • Editor: Neovim (external for now)

Kubernetes nodes are a cut down version that do not come with a WM of any kind. I do however have a pikvm with ezCoo 4x1 HDMI switch that allows me to access the 3 master nodes in case something was to go wrong with them, look for details here, this is in case I can't connect to the machines via SSH directly.

I am able to deploy from both giant and surface machines to all machines, I do this with sudo because only my root user has ssh access to other root users, this isn't ideal still but is best I could come up with. To do such deployment to all orange pi's I would do

sudo colmena apply --on "opi-*"

Building image for Orange Pi 5

There are very small differences between my Orange Pi 5's, I have 4 of them and other than hostnames the setups are effectively the same. To build an image, head to root directory of this repo and run

nix build .#sdImage-opi4

to build image for opi4 (Orange Pi 5 number 4), analogous commands to build for opi1, opi2 and opi3. This will take couple minutes and eventually produce a file in result/sd-image that ends with .img.zst.

At this point plug in the SD card, check lsblk to see where it is. Suppose its at /dev/sda then to flash you will have to run

zstdcat orangepi5-sd-image-24.05.20240314.d691274-aarch64-linux.img.zst | sudo dd status=progress bs=8M of=/dev/sda

where orangepi5-sd-image-24.05.20240314.d691274-aarch64-linux.img.zst is the name of the file that was generated with nix build command.

To flash onto nvme, yyou must first flash your SPI flash, to do this install official Orange Pi 5 os first and run orangepi-config and flash SPI there.

To flash this onto nvme, your best bet is to run Orangi Pi 5 of that SD card, copy over (using scp/rsync) the .img.zst file over SSH to the running Orange Pi 5 and then run the same command as above but instead of /dev/sda target the nvme drive. If you have flashed your SPI flash correctly, turning off Orange Pi and removing SD card should be all you need to do after that to force it to boot off nvme.

How to install on a fresh machine

I use nixos-anywhere with disko and impermamence to install on my machines.

For simplicity one can use either minimal NixOS image from NixOS website or the purpose made for this from nixos-images.

I need to have the /persistent to re-create the state, this usually comes from a backup or is copied across before I do a full on format.

First I do some preparation

  • Get /persistent folder for the machine I am installing from (somehow).
  • Boot into livecd mode and run passwd as root setting some password easy to remember. Run ip a to get the IP address of the machine (the machine must be connected to internet, ideally via cable).
  • From machine you are installing from run sudo ssh <IP-OF-THE-MACHINE> and accept the fingerprint.

Once the prep is done, simply run

sudo nix run github:nix-community/nixos-anywhere -- --extra-files "/home/atropos/nixos/surface" --flake .#surface [email protected]

This is ran with sudo to ensure we have sufficient permissions for whatever is in /home/atropos/nixos/surface to copy it over. the content of this surface folder should be one folder and that folder should be "persistent" which is to represent the /persistent folder on the host machine.

I had this fail on me once because i didn't have permission to all the stuff inside of the surface folder. Before doing this get fresh image and whack it on, so it is in livecd mode.

During this process if doing on desktop will be asked for password for zfs encryption. for ext4 nothing

Work to be done

  • Orange Pi Zero 2W setup is not working it needs fixing.
  • My neovim setup should be ingested.

Acknowledgements

  • I have shamelessly copied a lot from Srvos, I am grateful for the work they have done.