From 5f043627b469a168b71e41dd332fff444223ced2 Mon Sep 17 00:00:00 2001 From: Voron-GitHub-Bot Date: Sat, 23 Dec 2023 00:47:03 +0000 Subject: [PATCH] Generate VoronUsers printer_mods README.md [skip ci] --- printer_mods/README.md | 375 +++++++++++++++++++++-------------------- printer_mods/mods.json | 8 + 2 files changed, 196 insertions(+), 187 deletions(-) diff --git a/printer_mods/README.md b/printer_mods/README.md index 9b4bc97504..c5ba7a021a 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -17,17 +17,38 @@ Printer mods for Voron 3D printers | 42bios | [Corner panel clip w. cable](42bios/corner_panel_clip_cable) | Corner panel clip with an internal cable path. | V2.4 | 2023-07-13T14:30:27+00:00 | | | [Exhaust filter housing - side...](42bios/exhaust_filter_housing_side) | Exhaust filter housing with the G1-8 "thread on the side. | V2.4 | 2023-07-13T14:30:27+00:00 | | | [relay mount](42bios/relay_mount) | relay-mount for 2x 2 channel relay modules. | V2.4 | 2023-07-13T14:30:27+00:00 | +| ademuri | [Lights, Camera, Voron](ademuri/Lights_Camera_Voron) | A mount for LED strips and Picam for the V0.1 | V0.2 | 2023-07-13T14:30:27+00:00 | +| aeresov | [cable tie DIN mount](aeresov/cable_tie_DIN_mount) | A bracket for cable ties to route cables across DIN rails. | V2.4 | 2023-07-13T14:30:27+00:00 | +| | [MeanWell UHP-xxx DIN mount](aeresov/MeanWell_UHP_DIN_mount) | A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount... | V2.4 | 2023-07-15T11:51:22+00:00 | +| | [Raspberry Pi DIN mount](aeresov/Raspberry_Pi_DIN_mount) | A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or... | V2.4 | 2023-07-13T14:30:27+00:00 | +| | [SKR 1.3/1.4 DIN mount](aeresov/SKR_DIN_mount) | A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or... | V2.4 | 2023-07-13T14:30:27+00:00 | +| | [TL filament sensor bracket](aeresov/TL_filament_sensor_bracket) | A bracket for TL filament sensor to mount near stock spool holder. | V2.4 | 2023-07-15T11:51:22+00:00 | | Akio | [Hidden cable routing z belt cover](Akio/cable_routing_z_belt_cover) | Z belt covers that allow hidden cable routing. | V2.4 | 2023-12-21T00:45:44+00:00 | +| al3ph | [Analog Timer Mount](al3ph/analog_timer_mount) | A skirt mount for analog timer | V0.2 | 2023-07-13T14:30:27+00:00 | +| | [Filament Runout Sensor](al3ph/filament_runout) | A simple filament runout sensor | V0.2, V1.8, V2.4, VSW | 2023-07-13T14:30:27+00:00 | +| | [LED Mount](al3ph/led_mount) | A mount for 10mm LED WS2812 strips | V0.2 | 2023-07-13T14:30:27+00:00 | +| | [PL05 Sensor Mount](al3ph/pl05_mount) | A mount PL05 inductive sensor | V0.2 | 2023-07-13T14:30:27+00:00 | +| alanho | [BTT PITFT50 v2 Mount](alanho/BTT_PITFT50_v2_Mount) | A mount for the BTT PITFT50 v2 Touch Display | V2.4 | 2023-10-24T08:48:08+00:00 | +| albert | [IKEA Dioder Led Mount](albert/IKEA_Dioder_Led_Mount) | A mount for the IKEA Dioder LED strip | V2.4 | 2023-12-21T00:45:44+00:00 | | AlexanderT-Moss | [270 Clamping Hinges](AlexanderT-Moss/270-Clamping-Hinges) | Simple 270 degree hinges that clamp to the front panels instead of... | V2.4 | 2023-07-14T13:24:54+00:00 | | Andre | [Mini Afterburner ADXL345 Mount](Andre/Mini_Afterburner_ADXL345_Mount) | Mount for an AXDL345 on the Mini Afterburner | V0.2 | 2023-07-14T13:24:54+00:00 | | | [Mini Afterburner Strain Relief](Andre/Mini_Afterburner_Strain_Relief) | A replacement strain relief for the Mini Afterburner toolhead | V0.2 | 2023-07-13T14:30:27+00:00 | | | [Revo Nozzle Skirt](Andre/Revo_Nozzle_Skirt_Trident) | A Revo nozzle box hidden in a Trident skirt. | VT | 2023-10-24T11:32:29+00:00 | | | [V0 Neopixel Front Bed Mount](Andre/V0_Neopixel_Front_Bed_Mount) | A replacement Front Bed Mount with room for a neopixel or dotstar... | V0.2 | 2023-07-14T13:24:54+00:00 | +| antoinecellerier | [DS18B20 Sensor Mount](antoinecellerier/ds18b20-sensor-mount) | DS18B20 temperature sensor mount | V0.2 | 2023-07-15T11:51:22+00:00 | +| ardichoke | [V0 Long Thumb Nut](ardichoke/v0-long-thumb-nut) | Taller thumb nuts for V0 bed | V0.2 | 2023-07-15T11:51:22+00:00 | +| arkeet | [Dial test indicator mount](arkeet/dti-mount) | A toolhead mount for a dial test indicator, where the tip is... | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | +| | [Magnetic hotend fan cover](arkeet/magnet-fan-cover) | A replacement hotend fan cover, held with magnets instead of screws. | V1.8, V2.4, VSW | 2023-07-13T14:30:27+00:00 | +| | [MGN12 X-axis](arkeet/mgn12) | Replaces the dual MGN9H rails with a single MGN12H. | V2.4 | 2023-07-15T11:51:22+00:00 | +| | [V0 DC inlet](arkeet/v0-dc-inlet) | Skirt inlet for external 24V DC power supply. | V0.2 | 2023-07-13T14:30:27+00:00 | +| aTinyShellScript | [RS PSU DIN Bracket](aTinyShellScript/RS_PSU_DIN_Brackets) | DIN brackets for MeanWell RS PSUs with 80mm spacing. | V2.4 | 2023-07-15T11:51:22+00:00 | +| baccula | [Revo Nozzle Holder for v2.4 350](baccula/revo_skirt_nozzle_holder) | A remix of Andre's design allowing for skirt storage of 4 E3D Revo... | V2.4 | 2023-07-13T14:30:27+00:00 | | Backenfutter | [Mount for Electreeks Camera](Backenfutter/Mount_for_Electreeks_Camera) | This Mod is a simple "One Piece" mount for the popular Electreeks... | V2.4 | 2023-07-13T14:30:27+00:00 | | Badnoob | [AB-BN Afterburner mod (5015)](Badnoob/AB-BN) | Improved Afterburner with 5015 fan | V1.8, V2.4, VSW, VT | 2023-07-14T13:24:54+00:00 | | | [AB-BN for Stock Afterburner (4020)](Badnoob/ABBN_for_Stock) | Improved Dragon and Rapido toolhead for stock Afterburner with 4020... | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | | | [Precision AB Drive](Badnoob/Precision_AB_Drive) | Changes the gearing for the AB drives to improve both resolution... | V2.4 | 2023-07-14T13:24:54+00:00 | | Baltojikale | [LoudOwl aka Stabby](Baltojikale/LoudOwl_aka_Stabby) | Alternative dual 5015 part cooling fan toolhead for Afterburner | V1.8, V2.4, VSW | 2023-07-14T13:24:54+00:00 | +| beaugalbraith | [Nova Printhead](beaugalbraith/Nova_Printhead) | Use Nova Hotend with Afterburner | V2.4 | 2023-07-13T14:30:27+00:00 | | BladeScraper-Designs | [CornerPanel_SpoolHolder](BladeScraper-Designs/CornerPanel_SpoolHolder) | A better supported Spool Holder that mounts to a modified corner... | V0.2 | 2023-07-14T13:24:54+00:00 | | | [Horizontal Spool Holder](BladeScraper-Designs/Horizontal-Spool-Holder) | Based on the stock holder but mounts to the horizontal extrusions. | V2.4 | 2023-07-13T14:30:27+00:00 | | | [Microswitch Pod With Connector](BladeScraper-Designs/Microswitch_Pod_With_Conector) | Microswitch pod with JST-XH 4-pin connector | V2.4 | 2023-07-13T14:30:27+00:00 | @@ -36,58 +57,148 @@ Printer mods for Voron 3D printers | | [Deck Panel Backpack](BlueBear/Deck_Panel_Backpack) | A mounting alternative if you don't want to drill your deck panel | V0.2 | 2023-07-14T13:24:54+00:00 | | | [Clippable Wago 221 Mounts](BlueBear/Wago_221_mount) | Mounts for Wago 221 to screw or clip-in on 1515 extrusions | V0.2 | 2023-07-14T13:24:54+00:00 | | | [Ziptie Mount](BlueBear/Ziptie_Mount) | Clippable Ziptie hooks for 1515 extrusions | V0.2 | 2023-07-13T14:30:27+00:00 | +| bobbleheed | [Filament Runout Sensor](bobbleheed/Filament_Runout) | Filament runout sensor that replaces the stock bowden retainer | V1.8, V2.4, VT | 2023-07-15T11:51:22+00:00 | +| | [Magnetic Panels](bobbleheed/Magnetic_Panels) | Magnetic clips to allow for easy removal and installation of panels | V2.4 | 2023-07-13T14:30:27+00:00 | | Boingomw | [Wago mount](Boingomw/Wago_mount) | Smaller 5 port Wago mount that fits parallel to the support rails | V2.4 | 2023-07-14T13:24:54+00:00 | | Bondtech | [Mini-After-LGX-Lite](Bondtech/Mini-After-LGX-Lite) | LGX Lite Toolhead Setup For Voron V0.1. | V0.2 | 2023-07-14T13:24:54+00:00 | +| btp | [Galileo chain mount (befenybay)](btp/Galileo_Switchwire_Chain_Mount) | Modified chain mount position to cater for difference with Galileo... | VSW | 2023-12-21T00:45:44+00:00 | +| buzzdalf | [v1.8/2.4 Afterburner connector...](buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | V1.8, V2.4 | 2023-07-15T11:51:22+00:00 | +| | [Ender 3 Switchwire Taller Z Mod](buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | VSW | 2023-07-15T11:51:22+00:00 | +| | [Ender 3 Switchwire Y Tensioner Mod](buzzdalf/ytension) | Y Tension Mod | VSW | 2023-07-15T11:51:22+00:00 | | ByteChild | [2-Channel Relay DIN Rail Bracket](ByteChild/2_Channel_Relay_DIN_Rail_Bracket) | DIN Rail mounting bracket for an 2-Channel-Relay | V2.4 | 2023-07-13T14:30:27+00:00 | | | [ESP32 DIN Rail Bracket](ByteChild/ESP32_DIN_Rail_Bracket) | DIN rail mounting bracket for an ESP32 | V2.4 | 2023-07-13T14:30:27+00:00 | +| bythorsthunder | [MGN9 Backers Idlers](bythorsthunder/MGN9_Backers) | New idler uppers for MGN9 Extrusion backers | V2.4 | 2023-07-15T11:51:22+00:00 | +| | [Stealthburner Rapido UHF](bythorsthunder/Stealthburner_Rapido_Uhf) | Stealthburner mod for Rapido UHF | V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | | CannedBass | [PITFT50 45-degree mount](CannedBass/PITFT50_45_degree_mount) | Mount that puts the screen at a 45-degree angle for more vertical... | V2.4, VT | 2023-07-13T14:30:27+00:00 | | | [Trident Bed Fans](CannedBass/Trident_Bed_Fans) | Bed fans for Trident | VT | 2023-07-13T14:30:27+00:00 | | Ch4rlesB | [V0 Handles Slim](Ch4rlesB/V0_Handles_Slim) | Simple and slim handles for the V0 | V0.2 | 2023-07-14T13:24:54+00:00 | | ChenTheDesignMaker | [Z Belt Clip](ChenTheDesignMaker/Z_Belt_Clip) | Simple clip to keep extra Z belts clean and away from panels | V2.4 | 2023-07-14T13:24:54+00:00 | +| chirpy | [V0.1 Nozzle Wiper](chirpy/NozzleWiper) | Servo powered nozzle wiper and purge bucket | V0.2 | 2023-07-15T11:51:22+00:00 | +| | [Runout UnKlicky Sensor](chirpy/RunoutUnklicky) | Runout UnKlicky Sensor is a filament runout sensor with mounts for... | V0.2, V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | +| | [V0.1 Raised Tophat](chirpy/TipTophat) | Alternative Tophat design that uses stock panels and raises height... | V0.2 | 2023-07-15T11:51:22+00:00 | +| chri.kai.in | [20x20mm Profile Covers](chri.kai.in/20x20mm_Profile_Covers) | Provide overlapping and flush slot covers for 20x20mm slot6... | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | +| | [Angry CAM USB](chri.kai.in/Angry_CAM_USB) | Housing for small USB camera module, allowing mounting to gantry or... | V2.4 | 2023-07-15T11:51:22+00:00 | +| | [Exhaust Adapter 100mm](chri.kai.in/Exhaust_Adapter_100mm) | Replace 60mm exhaust fan with 100mm ventilation system adapter | V1.8, V2.4, VT | 2023-07-15T11:51:22+00:00 | +| chrisrgonzales | [270° Front Panel Hinge](chrisrgonzales/270_degree_hinge) | Hinges that have 270° of swivel, parametric CAD included | V2.4 | 2023-07-15T11:51:22+00:00 | +| christophmueller | [Phaetus and Zodiac Dragonfly BMO...](christophmueller/Phaetus_Dragonfly_BMO_Afterburner) | Covers both the original Phaetus variant as well as the Zodiac one. | V1.8, V2.4, VSW | 2023-07-15T11:51:22+00:00 | +| claytono | [Voron 2.4 Extrusion Jig](claytono/2.4-extrusion-jig) | A jig help align extrusions to get a properly square frame | V2.4 | 2023-07-13T14:30:27+00:00 | +| | [Fysetc S6 V2 Mount](claytono/fysetc-s6-v2-mount) | DIN Mount for the Fysetc S6 V2 controller | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | +| | [V0 Zip Tie Skirts](claytono/v0-zip-tie-skirts) | V0 skirts with small loops added along the top to allow zip tyiing... | V0.2 | 2023-07-13T14:30:27+00:00 | +| clee | [Monster8 DIN Rail Mounts](clee/Monster8_heatsert_mount) | DIN mount for Makerbase Monster8 V1/V2 controller | V2.4, VT | 2023-07-15T11:51:22+00:00 | +| cmrny | [V0.1 Motor Panel Modification](cmrny/v01_motor_panel_no_rub) | V0.1 Motor panel modification to keep umbilical and bowden tube... | V0.2 | 2023-07-13T14:30:27+00:00 | +| conqueror433 | [Voron Parts Logo](conqueror433/Voron_Parts_Logo) | Voron Parts Logo for your back panels, 3D Print or Laser Cut | V2.4 | 2023-07-15T11:51:22+00:00 | +| | [Voron V0.1 Parts Logo](conqueror433/Voron_V0.1_Parts_Logo) | Voron Parts Logo for your V0 deck panel | V0.2 | 2023-07-15T11:51:22+00:00 | +| consibonsi | [Y-Mod SW 9mm](consibonsi/Y-Mod_SW_9mm) | 9mm Y belt mod for SW | VSW | 2023-07-13T14:30:27+00:00 | +| csch0 | [SW Fan Mount No Tape](csch0/SW_FanMount_No_Tape) | 60x20 Fan Mount for SW without tape | VSW | 2023-07-15T11:51:22+00:00 | +| d3nny | [Filtered Power Plug with...](d3nny/mains_plug_panel_for_RND_165-00057) | Filtered Power Plug for RND 165-00057 and CAT6-Plug | V2.4 | 2023-07-13T14:30:27+00:00 | | D4rkCelerity | [Raspberry Pi Zero Bracket](D4rkCelerity/Raspberry_Pi_Zero_Bracket) | Modified version of Trident RPi bracket to fit the smaller RPi Zero | V0.2, V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | -| DC67 | [Plug Panel Mod for Schaffner...](DC67/plug_panel_schaffner) | A modified plug panel for the Power Entry Connector Schaffner... | V2.4 | 2023-07-14T13:24:54+00:00 | | DaGlo | [V0.1 Duet 2 Wifi mounting brackets](DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets) | Voron 0.1 Mounting brackets with/without RPi 4 | V0.2 | 2023-07-13T14:30:27+00:00 | | | [Voron V0 Mean Well power supply...](DaGlo/Voron_V0_MW_PS_Bracket) | Voron V0 Mean Well power supply bracket (Funssor Kit) | V0.2 | 2023-07-14T13:24:54+00:00 | | | [Voron V0 SSR Mount](DaGlo/Voron_V0_SSR_Mount) | Voron V0 SSR Mount for the bottom | V0.2 | 2023-07-14T13:24:54+00:00 | | DaGrooch13 | [Tophat Exhaust Filter V0](DaGrooch13/Tophat_Exhaust_Filter) | Activated charcoal exhaust filter with HEPA that replaces the rear... | V0.2 | 2023-07-14T13:24:54+00:00 | -| DaStivi | [The Cephalopod limb (BTT Octopus...](DaStivi/the_Cephalopods_limb) | An alternative Din rail mount for BTT Octopus (PRO) boards | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | | Dan88 | [V0 one-part Skirts](Dan88/V0skirt) | One part Skirts for the V0 | V0.2 | 2023-07-13T14:30:27+00:00 | +| DaStivi | [The Cephalopod limb (BTT Octopus...](DaStivi/the_Cephalopods_limb) | An alternative Din rail mount for BTT Octopus (PRO) boards | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | | Daten | [Revo hotend skirt case](Daten/Voron_2.4_Revo_Nozzle_Holder) | A skirt case for the Revo hotends to reside R1 and R2 | V2.4 | 2023-07-14T13:24:54+00:00 | +| davidauvergne | [Center_cable_management_duct](davidauvergne/Center_cable_management_duct) | Mod for a centered cable management | V2.4 | 2023-07-15T11:51:22+00:00 | +| DC67 | [Plug Panel Mod for Schaffner...](DC67/plug_panel_schaffner) | A modified plug panel for the Power Entry Connector Schaffner... | V2.4 | 2023-07-14T13:24:54+00:00 | +| deepfriedheroin | [v0 Wago Bed Mounts](deepfriedheroin/v0_bed_wagos) | Easy to install Wago mounts for the v0 | V0.2 | 2023-07-13T14:30:27+00:00 | +| | [v0 Power Wagos](deepfriedheroin/v0_power_wagos) | Easy to install Wago mounts for v0 mains | V0.2 | 2023-12-21T00:45:44+00:00 | +| | [V2 Bed Wagos](deepfriedheroin/v2_bed_wagos) | Wire management for the v2 bed | V2.4 | 2023-07-13T14:30:27+00:00 | +| dePrintinator | [HEPA Exhaust](dePrintinator/HEPA_Filter_Exhaust) | HEPA filter chamber exhaust replacement. | V1.8, V2.4, VT | 2023-07-15T11:51:22+00:00 | | DerekBackus | [LED Strip Holder](DerekBackus/LED_Holder) | Simple bracket to mount an LED strip | | 2023-07-13T14:30:27+00:00 | | | [Trident Right Skirt Switch](DerekBackus/Right_Skirt_Switch) | Moves power switch to right front skirt on the Trident | | 2023-07-13T14:30:27+00:00 | | Derpimus | [V0.1 Block Handle](Derpimus/Block_handle_v0.1) | V0.1 Block Style Handle | V0.2 | 2023-07-14T13:24:54+00:00 | | DorjeDorf | [Duet 3 3HC Din Bracket](DorjeDorf/Duet_3_3HC_Din_Bracket) | V2.4 Duet 3 3HC Din Bracket | V2.4 | 2023-07-13T14:30:27+00:00 | | | [Duet 3 6HC Din Bracket](DorjeDorf/Duet_3_6HC_Din_Bracket) | V2.4 Duet 3 6HC Din Bracket | V2.4 | 2023-07-13T14:30:27+00:00 | -| Dr-Info | [V2.4 Rear Skirt Mod for Z-Drive...](Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts) | This mod enables the you to utilize the rear skirts, power and... | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [Corner Cable Cover with Drop Holes](Dr-Info/corner_cable_cover_with_drop_down_holes) | Corner cable cover around Z-idler with drop holes near z frame and... | V2.4 | 2023-07-13T14:30:27+00:00 | +| doubletrouble | [V0 Skirt Mod](doubletrouble/V0_Skirt_Mod) | V0 Skirt Mod | V0.2 | 2023-07-13T14:30:27+00:00 | +| Dr-Info | [Corner Cable Cover with Drop Holes](Dr-Info/corner_cable_cover_with_drop_down_holes) | Corner cable cover around Z-idler with drop holes near z frame and... | V2.4 | 2023-07-13T14:30:27+00:00 | +| | [V2.4 Rear Skirt Mod for Z-Drive...](Dr-Info/V2.4r2_Z-Drive_Motor_Tensioner_Mod_Rear_Skirts) | This mod enables the you to utilize the rear skirts, power and... | V2.4 | 2023-07-14T13:24:54+00:00 | | DrGhetto | [Ghetto Panels](DrGhetto/GhettoPanels) | Printed panels for the Voron Zero | V0.2 | 2023-07-14T13:24:54+00:00 | -| ElPoPo | [Removable Doors](ElPoPo/RemovableDoors) | New hinge to easily remove the door and have a wide opening V2.x | V2.4 | 2023-07-14T13:24:54+00:00 | +| eamars | [Stealthburner (RC1) Dragon...](eamars/stealthburner_crazy_dragon_toolhead) | The Stealthburner toolhead mount for Mellow Crazy, TriangleLab... | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | +| eddie | [LED Bar Clip](eddie/LED_Bar_Clip) | Modular LED Clip for mounting LED Strip to 2020 Extrusions | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | +| | [V1.8 12mm Z Mod](eddie/V1.8_12mm_Z_Mod) | Add V1.8 option for 12mm Z rods | V1.8 | 2023-12-21T00:45:44+00:00 | +| edwardyeeks | [Tridentified V2.4 Power Inlet](edwardyeeks/Tridentified_V2.4_Power_Inlet) | Trident style side power inlet for V2.4 using Z Drive Motor... | V2.4 | 2023-07-13T14:30:27+00:00 | +| elcrni | [Trident Internal Spool Holder](elcrni/Trident_Internal_Spool_Holder) | Internal spool holder for 300 and 350 Tridents. Supports full size... | VT | 2023-12-21T00:45:44+00:00 | +| | [V.24/Trident Spool Holder](elcrni/V2.4-Trident-Spool-Holders) | Spool holder that mounts on top for "too close to the wall" printers | V1.8, V2.4, VT | 2023-12-21T14:04:19+00:00 | | Electroleon | [U2C Mounting](Electroleon/U2C_Mounting) | Bigtreetech U2C CAN Interface mounting bracket | V0.2, V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | | Ellis | [15x15 Drag Chain End](Ellis/15x15_Drag_Chain_End) | 15x15 drag chain end piece | V2.4 | 2023-07-13T14:30:27+00:00 | | | [Badge Retractor Mount](Ellis/Badge_Retractor_Mount) | Extrusion mount for badge retractor to keep bowden tube out of the... | V2.4 | 2023-12-21T00:45:44+00:00 | | | [Bed Fans](Ellis/Bed_Fans) | Bed fan control macros and 5015 bed fan mounts | V2.4 | 2023-07-14T13:24:54+00:00 | | | [Short Z Joints](Ellis/Short_Z_Joints) | Shorter Z joints for the v2.4 | V2.4 | 2023-10-24T11:32:29+00:00 | | | [Single MGN9H Carriage](Ellis/Single_MGN9H_Carriage) | Single MGN9H toolhead carriage with toolhead x endstop support (for... | V1.8, V2.4 | 2023-07-14T13:24:54+00:00 | +| ElPoPo | [Removable Doors](ElPoPo/RemovableDoors) | New hinge to easily remove the door and have a wide opening V2.x | V2.4 | 2023-07-14T13:24:54+00:00 | | Empusas | [Mounts for BTT Filament Motion...](Empusas/BTT_Filament_Motion_Sensor_Mount) | Mounts for Big Tree Tech Smart Filament Motion Sensor | V0.2, V1.8, V2.4, VSW | 2023-07-14T13:24:54+00:00 | | | [Power Skirt 2.x FN284-10-06](Empusas/PowerSkirt_FN284-10-06) | Power Skirt for Schaffner FN284-10-06 V2.x | V2.4 | 2023-07-14T13:24:54+00:00 | | | [Mounts for Terminal Blocks NC933...](Empusas/Terminal_Blocks_NC933_SPL-62) | Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress | V2.4 | 2023-07-14T13:24:54+00:00 | +| evandepol | [Crydom GN Terminal Guard](evandepol/Crydom-GN-Guard) | A simple safety guard for the terminals on a Crydom GN SSR | V2.4 | 2023-07-15T11:51:22+00:00 | +| | [Voron 2.4 cable clamps](evandepol/Voron2.4-Cable-clamps) | A set of 2020-mounted cable guards to organize and dress the wiring... | V2.4 | 2023-07-15T11:51:22+00:00 | +| falo | [LGX Lite CAN Side Mount](falo/lgx_lite_side_can) | A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | +| | [Magnetic Exhaust Grill Cover](falo/magnetic_grill_cover) | A magnetic cover to seal the filtered exhaust | V2.4 | 2023-07-15T11:51:22+00:00 | +| | [Toolhead PCB to CAN Mount Adaptor](falo/toolhead_pcb_to_can) | A mount to enable side mounting of a CAN board (Huvud/SHT42) in... | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | | Fiction | [C270 mount](Fiction/C270_mount) | Logitech C270 webcam front-centre mount | V2.4, VT | 2023-07-14T13:24:54+00:00 | | | [Crossrail](Fiction/Crossrail) | Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets | V2.4, VT | 2023-07-14T13:24:54+00:00 | | | [Exhaust_cover](Fiction/Exhaust_cover) | Cover for exhaust cutout in back panel | V2.4, VT | 2023-07-14T13:24:54+00:00 | | | [Exhaust_cover_SFS](Fiction/Exhaust_cover_SFS) | Exhaust cover and BTT Smart Filament Sensor mount | V2.4, VT | 2023-07-14T13:24:54+00:00 | | | [LGX Lite toolhead PCB mount](Fiction/LGX_Lite_toolhead_PCB_mount) | Mount for Hartk's toolhead PCB(s) for LGX Lite | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | +| filotto78 | [6mm slot cover](filotto78/6mm_slot_cover) | Simple cover for extrusion with 6mm slot width | V2.4 | 2023-07-13T14:30:27+00:00 | +| frankaf | [Euclid Probe Carriage](frankaf/mgn12-euclid) | A MGN-12 carriage with an inset mount for a Euclid Probe | V1.8, V2.4, VT | 2023-07-17T22:40:39+00:00 | | FreeformFez | [V1.8 Filtered Power Inlet](FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | V1.8 | 2023-12-21T00:45:44+00:00 | -| GSL12 | [Pocketwatch Nema 17](GSL12/pocketwatch_nema17) | Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe... | | 2023-07-13T14:30:27+00:00 | | GadgetAngel | [Bed Support Extrusions Alignment...](GadgetAngel/Bed_Support_Alignment_Tools) | The bed support alignment tools will assist in helping align the... | V2.4 | 2023-07-14T13:24:54+00:00 | | | [Cricut Voron Logos](GadgetAngel/Cricut_Voron_Logos) | For any cutting machines or machines that rely on vector graphics... | V0.2, V2.4, VSW, VT | 2023-10-24T11:32:29+00:00 | | Galvanic | [Bowden Tube Guide](Galvanic/Bowden_Tube_Guide) | Bowden tube guide and CANBUS wire support | V1.8, V2.4, VT | 2023-07-14T13:24:54+00:00 | +| gamebofh | [Laser cut door panels](gamebofh/door-panels) | Files to allow you to create laser cut door panels with some... | VSW | 2023-07-15T11:51:22+00:00 | +| gauravmm | [Crazy Mozzie HF toolhead SB+CW2](gauravmm/crazy_mozzie_cw2) | Toolhead for Crazy Mozzie HF, compatible with Stealthburner and... | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | +| gen2eng | [Switchwire LED wire pass through](gen2eng/z_carriage_stop_pass_through) | Z Carriage Stop modification that makes pass through of wires for... | VSW | 2023-07-15T11:51:22+00:00 | +| geoffreyyoung | [Dual Rail Installation Guide](geoffreyyoung/dual_rail_guide) | Rail installation guide that also works for the 2.4 dual rail... | V2.4 | 2023-07-13T14:30:27+00:00 | +| | [LGX Info, Links, and Models](geoffreyyoung/lgx) | Useful information and models for using the Bondtech LGX extruder... | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | +| gerritwellen | [Manta M8P Mount](gerritwellen/manta-m8p-bracket) | Mounting Bracket for BTT Manta M8P | V2.4, VT | 2023-07-13T14:30:27+00:00 | | GiulianoM | [Fly F407ZG Mount](GiulianoM/FlyF407ZG) | Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG | V2.4 | 2023-07-14T13:24:54+00:00 | | Gizzle | [Ender 3 and Ender 3 Pro...](Gizzle/ender-3_pro_switchwire) | Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics... | VSW | 2023-12-21T00:45:44+00:00 | +| golas | [V0.1 Extended tophat hinge](golas/v0-extended-tophat-hinge) | Extended tophat for v0.1 with hinges (integrated or screwed ones). | V0.2 | 2023-07-15T11:51:22+00:00 | +| | [V0.1 Trident skirt remix with...](golas/v0-trident-skirt-mix) | Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain... | V0.2 | 2023-07-15T11:51:22+00:00 | +| GSL12 | [Pocketwatch Nema 17](GSL12/pocketwatch_nema17) | Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe... | | 2023-07-13T14:30:27+00:00 | +| hartk1213 | [Voron0.2 2.8 Waveshare Display](hartk1213/Voron0.2_2.8_WaveshareDisplay) | 2.8 Waveshare display for V0.2 | V0.2 | 2023-07-15T11:51:22+00:00 | +| | [Voron0.2 Rear Keystone Skirt](hartk1213/Voron0.2_Rear_Keystone_Skirt) | Added keystone slot on rear skirt for V0.2 | V0.2 | 2023-07-13T14:30:27+00:00 | +| | [Voron0 C14Inlet](hartk1213/Voron0_C14Inlet) | Added a new Power inlet that uses a Fused C14 plug and switch that... | V0.1 | 2023-12-21T00:45:44+00:00 | +| | [Voron0 deck panel](hartk1213/Voron0_deck_panel_with_logo_and_VORON0) | Used @Kruppes blank deck panel to add the logo as well as the name... | V0.1 | 2023-10-24T11:32:29+00:00 | +| | [Voron0 display dualcolor](hartk1213/Voron0_display_dualcolor) | Added a dual color file for the Voron Display Front housing | V0.1 | 2023-07-15T11:51:22+00:00 | +| | [Voron0 ExtendedLegs](hartk1213/Voron0_ExtendedLegs) | New extended legs to raise the printer up a tiny bit more | V0.1 | 2023-07-15T11:51:22+00:00 | +| | [Voron0 ExtrusionSkirt](hartk1213/Voron0_ExtrusionSkirt) | Created a new skirt design that uses 50mm extrusions as legs and it... | V0.1 | 2023-07-15T11:51:22+00:00 | +| | [Voron0 Hinged Top Hat](hartk1213/Voron0_Hinged_Top_Hat) | Created a new hinged top hat design for the V0 so it can fold away... | V0.1 | 2023-07-15T11:51:22+00:00 | +| | [Voron0 MGN9C X Axis](hartk1213/Voron0_MGN9C_X_Axis) | This mod, replaces the stock MGN7H for MGN9C on the V0 | V0.1 | 2023-07-15T11:51:22+00:00 | +| | [Voron2.4 GE5C](hartk1213/Voron2.4_GE5C) | This mod replaces the stack of printed z joints with a metal... | V2.4 | 2023-07-15T11:51:22+00:00 | +| | [Voron2.4 SexBolt ZEndstop](hartk1213/Voron2.4_SexBolt_ZEndstop) | This mod replaces stock V2 Z endstop with a different style | V2.4, VT | 2023-07-15T11:51:22+00:00 | +| | [Voron2.4 and Trident Pins Mod](hartk1213/Voron2.4_Trident_Pins_Mod) | This mod replaces all the M5 screws for all idlers/pulleys/bearings... | V2.4, VT | 2023-07-15T11:51:22+00:00 | +| | [Voron2.4 Y Endstop Relocation](hartk1213/Voron2.4_Y_Endstop_Relocation) | This mod relocates the Y endstop to the top A drive piece | V2.4 | 2023-07-15T11:51:22+00:00 | +| henrikssn | [Parametric Spool Holder](henrikssn/parametric_spool_holder) | Spool holder where the length is a parameter. | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | +| | [Plug Panel Mod for Generic...](henrikssn/plug_panel_generic) | v2.4 plug panel for generic unfiltered modules with 66mm x 27mm... | V2.4 | 2023-07-13T14:30:27+00:00 | +| hergtoler | [Exhaust Housing for 120mm Fan...](hergtoler/exhaust_120mm_duct) | v2.4 Exhaust Housing for 120mm Fan and 4in Duct | V2.4 | 2023-07-15T11:51:22+00:00 | +| hernsl | [Bottom Panel Mag Clip](hernsl/bottom_panel_mag_clip) | v2.4 magnetic clips to retain bottom panel | V2.4 | 2023-07-15T11:51:22+00:00 | +| hhammarstrand | [Afterburner connector cover for...](hhammarstrand/afterburner_connector_cover_42STH20-1004AS) | Connector cover for 42STH20-1004AS | VSW | 2023-10-24T11:32:29+00:00 | +| hijax_pl | [Corner panel clip](hijax_pl/corner_panel_clip) | V2 panel corner frames using 3-way L brackets in the corners | V2.4 | 2023-07-13T14:30:27+00:00 | +| | [Din Rail mount](hijax_pl/din_rail_mount) | Adapter to attach DIN Rail to 2020 extrusion. | V2.4 | 2023-07-13T14:30:27+00:00 | +| | [Controler Board adapters](hijax_pl/ender_compatible_controller_mount) | DIN (rotated) and legacy adapters for boards like SKR mini E3. | V2.4 | 2023-07-13T14:30:27+00:00 | | Hobson318 | [Belt Tension Wrench](Hobson318/Belt_Tension_Wrench) | Wrench for easier turning of the belt tension knobs on V0.1 | V0.2 | 2023-07-13T14:30:27+00:00 | | | [Klipper Expander Mount](Hobson318/Klipper_Expander_Mount) | Mounting brackets for the klipper expander using vhb tape or... | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | +| hoschi | [FYSETC Spider DIN Rail Mount](hoschi/FYSETC_Spider_DIN_Mount) | DIN rail mount for FYSETC Spider | V2.4 | 2023-07-15T11:51:22+00:00 | +| hymness1 | [10x11mm chain VSW](hymness1/10x11mm_chain_VSW) | Printable and openable 10x11mm chain | V0.2, VSW | 2023-07-13T14:30:27+00:00 | +| | [Quickdraw probe Voron Switchwire](hymness1/Quickdraw_probe_Voron_Switchwire) | Detachable magnetic probe with docking system for VSW | VSW | 2023-07-15T11:51:22+00:00 | | Iakabos | [c920 Mount](Iakabos/C920_mount) | Slim mount for logitech c920 webcam | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | | | [V0 beltchains](Iakabos/V0_beltchain) | Modified beltchain parts for V0 Z cables | V0.2 | 2023-07-13T14:30:27+00:00 | +| iblue | [V0.1 Tophat Extractor](iblue/TophatExtractor) | Tophat Extractor for the Voron V0.1 with activated charcoal and... | V0.2 | 2023-07-13T14:30:27+00:00 | +| jangrewe | [Bitter USB Cam](jangrewe/Bitter_USB_Cam) | Modification of the "Angry Cam USB v2.0" webcam mount for 1515... | V0 | 2023-10-24T08:41:48+00:00 | +| jappaj | [V0.1 FanSaver](jappaj/FanSaver) | A printable fix for overheating V0.1 blower fans | V0.2 | 2023-07-15T11:51:22+00:00 | +| jasonc | [V2.4 Z-Idler Shoulder Bolt Mod](jasonc/Z_Idler_Shoulder_Bolt) | Modification to the idler carriers to accept a 25mm shoulder bolt.... | V2.4 | 2023-07-15T11:51:22+00:00 | +| Jasrags | [Feed slot with filament pass-...](Jasrags/sw_fee_slot_filament_passthrough) | A feed slot with a filament pass-through | VSW | 2023-07-13T14:30:27+00:00 | +| jatson | [Plug panel mod for Schurter...](jatson/plug_panel_schurter) | A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151... | V2.4 | 2023-07-13T14:30:27+00:00 | +| jaysuk | [4.3 Fly Screen Mount](jaysuk/4.3_fly_screen_mount) | A mount for a 4.3" Fly Screen | V0, V0.1 | 2023-07-15T11:51:22+00:00 | | JD | [V2.4 Filament runout sensor](JD/RefillPlease) | Replace the 2.4 stock bowden tube holder and add a filament runout... | V1.8, V2.4, VT | 2023-07-14T13:24:54+00:00 | +| jeoje | [4.3" Touchscreen Mount](jeoje/4.3_Inch_Touchscreen_Mount) | Mounts a [Waveshare 4.3inch Capacitive Touch... | V2.4, VSW | 2023-07-13T14:30:27+00:00 | +| | [Molex MLX and Microfit 3.0 Bed...](jeoje/Molex_MLX_Microfit_Bed_Connector_Mount) | Solid mount your bed connectors | V2.4 | 2023-07-15T11:51:22+00:00 | +| | [Sturdy Handles](jeoje/Sturdy_Handles) | Modified v2.2 handles with no panel rest and with 4 anchor points | V2.4 | 2023-07-15T11:51:22+00:00 | +| | [V2.4 Z Chain Guide with...](jeoje/Z_Chain_Guide_Thermistor_Mount) | Modifies the Z chain guide to hold a chamber thermistor | V2.4 | 2023-07-15T11:51:22+00:00 | +| JeremyRuhland | [V2.4 Plug Panel Generic Combo](JeremyRuhland/V2.4_Plug_Panel_Generic_Combo) | Skirt power panel for generic amazon plug/switch/fuse combo module,... | V2.4 | 2023-07-14T13:24:54+00:00 | +| jgehrig | [V0 LCD Touchscreen Skirt](jgehrig/v0_lcdskirt) | 3.2" LCD Touch Screen Skirt | V0.2 | 2023-07-15T11:51:22+00:00 | | JJFX | [V2.4 CR Touch Snap Mount](JJFX/CRTouch_Snap_Mount) | Mount to replace v2.4 (MGN9) probe with a Creality CR Touch | V2.4 | 2023-07-14T13:24:54+00:00 | | JNP | [Back Door](JNP/Back-Door) | Door for easy hardware access | V0.2 | 2023-07-14T13:24:54+00:00 | | | [Deck Panel](JNP/Deck_Panel_Rear) | Covers the hotbed cables | V0.2 | 2023-07-13T14:30:27+00:00 | @@ -97,17 +208,21 @@ Printer mods for Voron 3D printers | | [Mid Panel](JNP/Mid-Panel) | Panel for SKR1.4/1.4 or SKR E3 mini mount | V0.2 | 2023-07-14T13:24:54+00:00 | | | [Neopixel Case](JNP/Neopixel-Y_Rails) | mounting for Neopixel strip with 8 LED´s | V0.2 | 2023-10-24T11:32:29+00:00 | | | [Side Panels](JNP/Side-Panels) | Panels with intergrated hinge | V0.2 | 2023-12-21T00:45:44+00:00 | -| Jasrags | [Feed slot with filament pass-...](Jasrags/sw_fee_slot_filament_passthrough) | A feed slot with a filament pass-through | VSW | 2023-07-13T14:30:27+00:00 | -| JeremyRuhland | [V2.4 Plug Panel Generic Combo](JeremyRuhland/V2.4_Plug_Panel_Generic_Combo) | Skirt power panel for generic amazon plug/switch/fuse combo module,... | V2.4 | 2023-07-14T13:24:54+00:00 | +| johanncc | [Raspberry Pi Camera Mount](johanncc/Raspberry_Pi_Camera_Mount) | Low profile raspberry pi camera mount | V0.2 | 2023-07-15T11:51:22+00:00 | | Jon | [1515 LED Mount](Jon/1515_led_mount) | Snap in 1515 Led mount for WS2812B | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [Z Cover for v0.1](Jon/V0.1_Z_Cover) | A cover to stop things from dropping down the Z motor and... | V0.1 | 2023-07-14T13:24:54+00:00 | | | [adxl345 skirt keystone](Jon/adxl345_skirt_keystone) | Skirt keystone for ADXL345 using Microfit 3.0 | V2.4 | 2023-07-13T14:30:27+00:00 | +| | [Z Cover for v0.1](Jon/V0.1_Z_Cover) | A cover to stop things from dropping down the Z motor and... | V0.1 | 2023-07-14T13:24:54+00:00 | +| joposter | [V0 Clippable LED Caselight](joposter/v0_clippable_ledmounts) | LED Case light for the V0 that clips into the extrusions | V0.2 | 2023-07-15T11:51:22+00:00 | | JosAr | [Klicky Probe](JosAr/Klicky-Probe) | Microswitch based inductive probe replacement | V0.2, V1.8, V2.4, VT | 2023-12-21T00:45:44+00:00 | | KenadyDwag44 | [Switchwire Lightbar](KenadyDwag44/sw_lightbar) | A LED lightbar for switchwire | VSW | 2023-07-13T14:30:27+00:00 | | KevinAkaSam | [VEFACH](KevinAkaSam/VEFACH) | Voron Exhaust Filter Inserts for Activated Coal + Hepa | V2.4, VT | 2023-07-14T13:24:54+00:00 | -| KiloQubit | [V0 Reverse Bowden Mount](KiloQubit/V0_reverse_bowden_mount) | V0 reverse bowden mount | V0.2 | 2023-07-14T13:24:54+00:00 | +| khay | [V0 Micro Backplate](khay/micro_backplate) | Minimalistic backplate for cooler motors and electronics | V0.2 | 2023-07-15T11:51:22+00:00 | +| | [Fan for V2-200mm²](khay/V2-200_4020_Electronics_Fan) | Middle Skirt for V2-200mm² Electronics Compartment | V2.4 | 2023-07-15T11:51:22+00:00 | +| | [3x Keystone PlugPanel](khay/V2_3x_Keystone_Plugpanel) | PlugPanel with Options for 3 Keystones | V2.4 | 2023-07-15T11:51:22+00:00 | +| KiloQubit | [Trident Schurter Inlet Skirt](KiloQubit/trident_schurter_power_inlet) | Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet | VT | 2023-07-14T13:24:54+00:00 | +| | [V0 Reverse Bowden Mount](KiloQubit/V0_reverse_bowden_mount) | V0 reverse bowden mount | V0.2 | 2023-07-14T13:24:54+00:00 | | | [V2.4 Z Chain Mounts for 3 Hole...](KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts) | Z chain mounts for 3 hole generic chain | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [Trident Schurter Inlet Skirt](KiloQubit/trident_schurter_power_inlet) | Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet | VT | 2023-07-14T13:24:54+00:00 | +| kirby | [V0 Sherpa Mini Direct Drive Mod](kirby/v0_sherpa_mini_direct_drive) | A direct drive mod for the V0 using the Annex Sherpa Mini extruder | V0.2 | 2023-07-13T14:30:27+00:00 | | Koios | [6mm Tempered Glass Mod](Koios/6mm_Glass) | Lock levers and rests for 6mm Tempered glass panels | V2.4 | 2023-07-13T14:30:27+00:00 | | | [C920 Low Profile Mount](Koios/C920_Mount) | Low profile mount for a C920 Webcam | V2.4 | 2023-07-14T13:24:54+00:00 | | | [LED Bar Mounts](Koios/LED_Mounts) | Low profile mount for led bar lights | V2.4 | 2023-07-13T14:30:27+00:00 | @@ -117,13 +232,17 @@ Printer mods for Voron 3D printers | | [V0 Printed Deck with inserts](Kruppes/Deck_Panel_inserts_logo) | Electronics Deck Panel using brass heat inserts. Optional with... | V0.2 | 2023-07-13T14:30:27+00:00 | | | [Belt Tension Meter](Kruppes/Tension_Meter) | Print in place tension meter to easily tighten multiple belts to... | V0.2, V1.8, V2.4, VSW | 2023-12-21T00:45:44+00:00 | | Kyleisah | [CableGator Cable Comb](Kyleisah/CableGator) | A cable comb for simplifying and tidying wire harnesses for... | V0.2, V1.8, V2.4, VSW, VT | 2023-07-14T13:24:54+00:00 | -| LJ | [Scrubby](LJ/Scrubby) | Easy to use filament dust filter | V0.2, V1.8, V2.4, VSW, VT | 2023-07-14T13:24:54+00:00 | +| lakai | [Bruag Skirts](lakai/Bruag_Skirts) | V2 350mm skirts inspired by Bruag Facades | V2.4 | 2023-07-13T14:30:27+00:00 | | Le0n | [Magnetic panels with Magnet Inserts](Le0n/Magnetic_Panels_with_Magnet_Inserts) | Magnetic panel mounts with magnets inserted into frame slots. | V1.8, V2.4, VT | 2023-07-14T13:24:54+00:00 | +| leandromarceddu | [PowerSkirt](leandromarceddu/PowerSkirt) | Modified skirtpiece for a digital power monitor | V2.4 | 2023-07-13T14:30:27+00:00 | +| Liselotte111 | [Red Lizard K1 UHF toolhead](Liselotte111/Red_Lizard_K1_UHF) | SB toolhead for Red Lizard K1 UHF | V2, VT | 2023-12-23T00:44:28+00:00 | +| littleferris | [V0 c14 Skirt Inlet](littleferris/V0_Skirt_Inlet) | V0 C14 Skirt inlet | V0.2 | 2023-07-13T14:30:27+00:00 | +| LJ | [Scrubby](LJ/Scrubby) | Easy to use filament dust filter | V0.2, V1.8, V2.4, VSW, VT | 2023-07-14T13:24:54+00:00 | | LoCoCNC | [3mm Top Hat Panels Clips](LoCoCNC/3mm_tophat_panel_parts) | Required to use the 3mm (1/8") thick top hat panels for V0.1 | V0.2 | 2023-07-13T14:30:27+00:00 | | | [MGN7H Shims](LoCoCNC/MGN7H_Shims) | Shims for making bearing cartridges coplanar | V0.2 | 2023-07-13T14:30:27+00:00 | | | [Mosquito PTFE 15mm Tube Cutting Jig](LoCoCNC/Mosquito_PTFE_Cutting_Jig) | Tool to precicely cut 15mm PTFE Tube | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Strain Relief w/ 10 Pin Microfit](LoCoCNC/Strain_Relief_w_Microfit) | Strain Relief with 10 pin Microfit connector | V0.2 | 2023-07-13T14:30:27+00:00 | | | [SSR Mounting Strap](LoCoCNC/ssr_strap) | Mounting Strap for SSR on 1515 Extrusions | V0.2 | 2023-07-14T13:24:54+00:00 | +| | [Strain Relief w/ 10 Pin Microfit](LoCoCNC/Strain_Relief_w_Microfit) | Strain Relief with 10 pin Microfit connector | V0.2 | 2023-07-13T14:30:27+00:00 | | | [V2.4 Bed Wiring Grommet](LoCoCNC/wire_grommets) | Safely capture your bed wires thru the bottom panel | V2.4 | 2023-07-13T14:30:27+00:00 | | LoganFraser | [ComboInlet](LoganFraser/ComboInlet) | Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes. | V2.4, VT | 2023-12-21T00:45:44+00:00 | | | [HorseshoeSpoolHolder](LoganFraser/HorseshoeSpoolHolder) | Horseshoe Spool Holder - mounts internally for Trident, or... | V0.2, V1.8, V2.4, VT | 2023-07-14T13:24:54+00:00 | @@ -132,10 +251,9 @@ Printer mods for Voron 3D printers | | [WagoMounts](LoganFraser/WagoMounts) | Wago Mounts for Din Rail or 2020 Extrusion mounting. | V2.4, VSW, VT | 2023-07-14T13:24:54+00:00 | | Long | [Mantis Dual 5015 Toolhead](Long/Mantis_Dual_5015) | MGN12 Dual 5015 Toolhead for 2.4 & 1.8 | V1.8, V2.4 | 2023-12-21T00:45:44+00:00 | | Lukas | [SSD1306 Case Front Cover](Lukas/SSD1306_Case_Front_Cover) | SSD1306 Mount replacement for Mini12864 | V2.4, VT | 2023-07-14T13:24:54+00:00 | -| MCMBen | [Voron0 Block & Tackle Z Belt](MCMBen/Voron0_Block_and_Tackle_Z_Belt) | A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to... | V0.2 | 2023-07-13T14:30:27+00:00 | -| MSA | [Belt tension helper](MSA/V0-Belt-tension-helper) | Belt tension helper for V0.1 | V0.2 | 2023-07-14T13:24:54+00:00 | -| MSiemons | [Tophat Hinge V0](MSiemons/TophatHingeV0.1) | Simple hinge for V0 Tophat | V0.2 | 2023-07-14T13:24:54+00:00 | | Mac10goesBRRRT | [PiTFT Mount](Mac10goesBRRRT/BTT_PiTFT) | Mount for the BTT PiTFT Touchscreen | V2.4, VT | 2023-07-13T14:30:27+00:00 | +| madfabrications | [Vertical PSU Mount](madfabrications/Vertical_PSU_Mount) | Mounts the PSU vertically on the DIN rails | V2.4 | 2023-07-13T14:30:27+00:00 | +| madros | [V0 OLED-skirt](madros/V0_skirt_OLED) | V0 skirt with 0.96" OLED | V0.2 | 2023-07-15T11:51:22+00:00 | | Majarspeed | [Hartk board mount galileo](Majarspeed/Hartk_Mount_Galileo) | It hangs stuff on your tool | V2.4 | 2023-07-14T13:24:54+00:00 | | MakeALeft | [Switchwire Clean Center Grill](MakeALeft/Switchwire_Front_Grill) | Removed magnet holders on center panel for cleaner look | | 2023-07-13T14:30:27+00:00 | | MasturMynd | [Stealth Zero](MasturMynd/V0.1-Stealth_Zero) | A low poly gantry with front tensioners and optional front mounted... | V0.1 | 2023-10-26T05:29:07+00:00 | @@ -145,14 +263,28 @@ Printer mods for Voron 3D printers | | [MiniSB_Rapido](Maverick/MiniSB_Rapido) | Modified MiniSB to use a Rapido hotend | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | | | [MiniSB_Sharkfin](Maverick/MiniSB_Sharkfin) | Modified MiniSB to use a Sharkfin Extruder | V0.2, V1.8, V2.4, VSW, VT | 2023-07-14T13:24:54+00:00 | | | [V0.2 Stealth Skirts](Maverick/V0.2_Stealth_Skirts) | Juiced up skirts for the V0.2 | V0.2 | 2023-10-24T08:48:08+00:00 | +| maximilian-foerg | [Afterburner Turbo Mod](maximilian-foerg/AB_Turbo_Mod) | A purely cosmetic mod for Afterburner | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | +| | [Switchwire Double 60mm Fan Mount](maximilian-foerg/VSW_Double_60mm_Fan_Mount) | A mount for two (or four) 60mm fans in SW's electronics compartment | VSW | 2023-07-15T11:51:22+00:00 | | Mckurt | [Switchwire Y Belt Tensioner](Mckurt/Switchwire_Y_Belt_Tensioner) | Switchwie Y axis Belt Tensioner | VSW | 2023-07-13T14:30:27+00:00 | +| MCMBen | [Voron0 Block & Tackle Z Belt](MCMBen/Voron0_Block_and_Tackle_Z_Belt) | A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to... | V0.2 | 2023-07-13T14:30:27+00:00 | | Mellow | [V0 Fly-Gemini](Mellow/V0_Fly-Gemini) | Fly-Gemini adapted model for V0 | V0.2 | 2023-07-13T14:30:27+00:00 | +| mikepthomas | [MKS Mosfet Mount](mikepthomas/MKS_Mosfet_Mount) | MKS Mosfet Mount based of the Trident Raspberry Pi Mount. | V1.8, V2.4, VT | 2023-07-15T11:51:22+00:00 | | MikesMods | [LGX mount for V0.1 with 2nd X rail](MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail) | V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X... | V0.2 | 2023-07-13T14:30:27+00:00 | | Minsekt | [Rear Umbilical](Minsekt/Rear_Umbilical) | Rear Umbilical mounting solution including a relocated Y-Endstop | V2.4 | 2023-07-13T14:30:27+00:00 | +| mjoaris | [10x11 Cable Chain Endcaps](mjoaris/10x11_Cable_Chain_Endcaps) | Printable Endcaps for 10x11 Cable Chains | V1.8, V2.4 | 2023-07-15T11:51:22+00:00 | +| | [Mini12864 LCD Mount](mjoaris/Mini12864_LCD_Mount_for_V2.4) | Swiveling case for the Fysetc Mini12864 LCD | V2.4 | 2023-07-15T11:51:22+00:00 | +| mosher | [Door hinges with M3 screws shafts](mosher/m3_door_hinges) | Simple mod of print in place door hinges, which uses m3 screws as... | V2.4 | 2023-12-21T00:45:44+00:00 | +| mpfl | [V0.1 OLED-skirt](mpfl/V0.1_skirt_OLED) | V0.1 skirt with 0.96" OLED | V0.2 | 2023-07-13T14:30:27+00:00 | | MrBean66 | [SKR Pro DIN Mount](MrBean66/SKR_PRO_Mount) | Simple mod to mount the SKR Pro board from BTT to a DIN rails. | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | | MrDespair | [MiniAB Pinda Probe Mount](MrDespair/MiniAB_Pinda) | Replacement MiniAB Cowling to add a mount for a Pinda style probe. | V0.2 | 2023-07-14T13:24:54+00:00 | | Mrgl-Mrgl | [LGX Lite Mount](Mrgl-Mrgl/LGX_Lite_Mount) | a mount for the LGX Lite | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | +| MSA | [Belt tension helper](MSA/V0-Belt-tension-helper) | Belt tension helper for V0.1 | V0.2 | 2023-07-14T13:24:54+00:00 | +| MSiemons | [Tophat Hinge V0](MSiemons/TophatHingeV0.1) | Simple hinge for V0 Tophat | V0.2 | 2023-07-14T13:24:54+00:00 | +| muradir | [Zodiac BMO Stealthburner Toolhead](muradir/Zodiac_BMO_Stealthburner_Toolhead) | A Stealthburner toolhead for the Zodiac BMO Hotend, based on the... | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | | Nashuar | [V0 Dragon Toolhead M2.5x8](Nashuar/V0_Dragon_ToolheadStockScrews) | This toolhead uses the stock M2.5 screw that came with the dragon... | V0.2 | 2023-07-13T14:30:27+00:00 | +| natewalck | [V1.8 Jigs](natewalck/v1.8_Jigs) | Jigs for assembling V1.8 | V1.8 | 2023-07-13T14:30:27+00:00 | +| nhchiu | [V0.1 Movable Pulley Z Drive](nhchiu/V0.1_Movable_Pulley_Z) | A movable pulley system on the Z axis with 1:8 total speed ratio... | V0.1 | 2023-07-15T11:51:22+00:00 | +| nikolasbabetas | [Neopixel Holder](nikolasbabetas/Neopixel_Holder) | A holder to attach Neopixel/WS2812B Led Strips to the V0.1 | V0.1 | 2023-07-15T11:51:22+00:00 | | Nomsplease | [60mm Shaft Jig](Nomsplease/60mm_Shaft_Jig) | Simple jig for cutting and grinding 60mm Z shafts | V2.4 | 2023-07-13T14:30:27+00:00 | | | [Duet Wifi Mount](Nomsplease/V0_duet_wifi_mount) | Duet wifi mount in pocketwatch location | V0.2 | 2023-12-21T00:45:44+00:00 | | | [LED Mounts](Nomsplease/V0_led_mounts) | Basic LED mounts for 10 and 12mm strips | V0.2 | 2023-12-21T00:45:44+00:00 | @@ -164,189 +296,28 @@ Printer mods for Voron 3D printers | | [RPI Metal DIN Mount](Oakman/RPI_Metal_DIN_Mount) | Adapter for metal DIN mounting the Raspberry Pi | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | | OboMaker3D | [C17-EXT Filter HEPA Carbon](OboMaker3D/C17-EXT) | Replaces standard filter with new HEPA Crabon and 120mm fan V1.1 | V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | | | [C17-EXT-CARTRIDGE for C17-EXT...](OboMaker3D/C17-EXT-CARTRIDGE) | Alternative to a commercial cartridge for the C17-EXT filter | V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | +| ommy | [roller brackets](ommy/roller_brackets) | Brackets to help rolling V2 on its side. | V2.4 | 2023-11-13T15:23:59+00:00 | +| oxno | [RBP Zero Bracket](oxno/rbp_zero_braket) | Bracket for Raspberry pi zero. | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | +| padok | [Chain Anchor - ADXL345 mount Mod](padok/chain_anchor-ADXL345_mount) | A ADXL345 mount for the Afterburner | V2.4 | 2023-07-15T11:51:22+00:00 | | Phalanx | ["Other" Idlers Mod](Phalanx/Other-V2-Idlers) | Allow usage of wider toolheads on the V2 | V2.4 | 2023-07-14T13:24:54+00:00 | +| piet206 | [V1.8 Z Rails Mod](piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion | V1.8 | 2023-10-24T11:32:29+00:00 | | Polar-Ted | [V0.1 Z nozzle endstop switch](Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch) | Sexbolt style switch for V0 | V0.2 | 2023-07-13T14:30:27+00:00 | | | [V0.1 Two Piece Back Panel](Polar-Ted/V0_Two_Piece_Back_Panel) | Vented 2 piece back panel for V0 | V0.2 | 2023-07-13T14:30:27+00:00 | | Polared | [Power Inlet with Keystone Insert](Polared/Power_Inlet_w_Keystone_Insert) | Voron 0.1 Power inlet with keystone insert slot | V0.2 | 2023-07-13T14:30:27+00:00 | +| ponkotsu1 | [V0 Launchpad Skirt](ponkotsu1/V0_Launchpad_Skirt) | Another style V0 skirt | V0 | 2023-12-21T00:45:44+00:00 | +| prasadp4009 | [StealthBurner CR Touch Mod](prasadp4009/SW_SB_CRTouch) | Voron SW StealthBurner CR Touch Mod | VSW | 2023-07-13T14:30:27+00:00 | | Printopal | [Magnetic top panel](Printopal/Magnetic_top_panel) | Top panel with magnets allows for quick installation and removal | V1.8, V2.4 | 2023-07-14T13:24:54+00:00 | | PsychoShaft | [C92X_PsycHoShafts_Mount](PsychoShaft/C92X_PsycHoShafts_Mount) | 2020 Top profile 920 camera mount / 2 point axis pivot | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | | QuackProfit | [V0 Adafruit NeoPixel LED Mounts](QuackProfit/V0-Adafruit-Y_Rails) | Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions | V0.2 | 2023-07-14T13:24:54+00:00 | -| Rhastlyn | [60mm Fan Cover](Rhastlyn/60mmFanCover) | A easy to install cover for spec 60mm fans originally designed for... | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Wansview 1080p Camera Mount](Rhastlyn/WansviewCameraMount) | A camera mount that replaces the OEM part to allow the camera to be... | V2.4 | 2023-07-14T13:24:54+00:00 | -| RockNLol | [RockNRoll](RockNLol/RockNRoll) | Rockers to roll the printer on its back for easier access to the... | V2.4 | 2023-07-14T13:24:54+00:00 | -| ScramblerUSA | [Side Skirt Power Switch](ScramblerUSA/SideSkirtPowerSwitch) | Skirt-mounted rocker switch for easy access for Voron 2.4 | V2.4 | 2023-07-14T13:24:54+00:00 | -| See1807 | [TopHat Exhaust and LED Light](See1807/Voron_V0_Exhaust_and_LED_Mod) | A mount for 10mm LED strips and Exhaust for Voron V0 | V0.2 | 2023-07-13T14:30:27+00:00 | -| Shiftingtech | [Trident Dual Power Switch](Shiftingtech/Trident_dual_power_switch) | A replacement skirt, allowing 2 power switches | VT | 2023-07-13T14:30:27+00:00 | -| ShinyPants | [OrangePi 3 LTS DIN Rail bracket](ShinyPants/Orange_Pi_3_LTS_DIN) | A DIN rail mount for OrangePi LTS 3 | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | -| Shteeeeeve | [V0.1 LED Tophat](Shteeeeeve/V01-LED-Tophat) | V0.1 LED Tophat w/ 24V LED Lightstrip | V0.2 | 2023-07-14T13:24:54+00:00 | -| Slidr | [PanzerBalls 2.4](Slidr/PanzerBalls2.4) | Squash Ball Feet for V2.4 | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [PanzerChain 2.4](Slidr/PanzerChain2.4) | Energychain for V2.4 | V2.4 | 2023-07-13T14:30:27+00:00 | -| Spaghetti-Bolognese | [LCD Case Mod](Spaghetti-Bolognese/LCD_case_mod) | Improvements to the V2.4 mini12864 LCD case inc E-stop button cover | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [Simplified Z Drive Motor Mount](Spaghetti-Bolognese/Z_drive_motor_mount) | Z drive motor mount bracket mod to improve pulley to belt alignment | V2.4 | 2023-12-21T00:45:44+00:00 | -| StvPtrsn | [Skirts for a 320mm Build](StvPtrsn/320mm_Build) | Skirts for a 320mm build | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [Keystone Jack for Filtered Mains...](StvPtrsn/Keystone_Jack_Filtered_Mains_Panel) | Add a keystone jack to your filtered mains plug panel | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Parts_Jigs and Mods](StvPtrsn/Parts_Jigs_and_Mods) | Parts, Jigs and modifications I use for my builds | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| | [Side Fan Support, No Tape](StvPtrsn/Side_Fan_Support_No_Tape) | Mount the 60mm side fans and inserts without tape | V2.4 | 2023-07-14T13:24:54+00:00 | -| Takuya | [WANSVIEW USB Camera Mount](Takuya/USBCameraMount) | WANSVIEW 1080p Camera Mount for Voron 2.4 | V2.4 | 2023-07-13T14:30:27+00:00 | -| TheSquiffy | [V0 Belts holder](TheSquiffy/V0_Belts_holder) | V0 Belts Holder | V0.2 | 2023-07-14T13:24:54+00:00 | -| TiagoBarata | [Logitech C270 Mount](TiagoBarata/Logitech_C270_Mount) | Logitech C270 Top Center Mount | V2.4 | 2023-07-14T13:24:54+00:00 | -| Tircown | [DIN mount RS-15-5 PSU](Tircown/DIN_mount_RS-15-5) | A DIN mount for the RS-15-5 | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Display mount 5"](Tircown/Display_mount_5inch) | Tiltable mount for a 5" tactile display | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [Raspberry in plug panel](Tircown/Raspberry_plug_panel) | Raspberry mount vertically in the plug panel, allow easy access to... | V2.4 | 2023-07-14T13:24:54+00:00 | -| | [V0.1 Skirt buttons](Tircown/V01_skirt_buttons) | Buttons for V0.1 spec skirts | V0.2 | 2023-07-14T13:24:54+00:00 | -| Triano | [Ender 3 Pro or V2 to Switchwire Mod](Triano/Ender_3Pro_Switchwire) | Convesion of an Ender 3 Pro or V2 to a Switchwire | VSW | 2023-07-14T13:24:54+00:00 | -| Ultrawaffles | [Ender 3 to SW conversion](Ultrawaffles/Ender_3_to_SW) | A conversion mod for the ender 3 to switchwire. Designed to allow... | VSW | 2023-10-24T11:32:29+00:00 | -| VinnyCordeiro | [RGB LED grid for Stealthburner](VinnyCordeiro/RGB_LED_grid_for_SB) | A small RGB LED grid for Stealthburner's logo | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| Weaslus | [Electronics Bay and Enclosure...](Weaslus/Electronics-Bay-Seperator) | Better enclose chamber and keep heat from electronics | V0.2 | 2023-07-13T14:30:27+00:00 | -| ZZP8202 | [Pull-out electrical store](ZZP8202/Pull-out_electrical_store) | Voron 2.4 Pull-out electrical store（350mm only） | V2.4 | 2023-07-14T13:24:54+00:00 | -| Zen3D | [V0 1515 T-nut](Zen3D/V0_1515_T-nut) | M3 square and hex nuts for Voron0 1515 frame | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [V0 Handle](Zen3D/V0_Handle) | Voron0 Handle for 3mm panels | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [V0 MidPanel HexPattern](Zen3D/V0_MidPanel_HexPattern) | Voron0 MidPanel with Hex pattern and Wire cover | V0.2 | 2023-07-14T13:24:54+00:00 | -| | [V0 Skirt set](Zen3D/V0_Skirt) | SSR, PowerSwitch, Adxl, Nameplate and color change printing | V0.2 | 2023-07-14T13:24:54+00:00 | -| aTinyShellScript | [RS PSU DIN Bracket](aTinyShellScript/RS_PSU_DIN_Brackets) | DIN brackets for MeanWell RS PSUs with 80mm spacing. | V2.4 | 2023-07-15T11:51:22+00:00 | -| ademuri | [Lights, Camera, Voron](ademuri/Lights_Camera_Voron) | A mount for LED strips and Picam for the V0.1 | V0.2 | 2023-07-13T14:30:27+00:00 | -| aeresov | [MeanWell UHP-xxx DIN mount](aeresov/MeanWell_UHP_DIN_mount) | A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount... | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Raspberry Pi DIN mount](aeresov/Raspberry_Pi_DIN_mount) | A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or... | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [SKR 1.3/1.4 DIN mount](aeresov/SKR_DIN_mount) | A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or... | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [TL filament sensor bracket](aeresov/TL_filament_sensor_bracket) | A bracket for TL filament sensor to mount near stock spool holder. | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [cable tie DIN mount](aeresov/cable_tie_DIN_mount) | A bracket for cable ties to route cables across DIN rails. | V2.4 | 2023-07-13T14:30:27+00:00 | -| al3ph | [Analog Timer Mount](al3ph/analog_timer_mount) | A skirt mount for analog timer | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Filament Runout Sensor](al3ph/filament_runout) | A simple filament runout sensor | V0.2, V1.8, V2.4, VSW | 2023-07-13T14:30:27+00:00 | -| | [LED Mount](al3ph/led_mount) | A mount for 10mm LED WS2812 strips | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [PL05 Sensor Mount](al3ph/pl05_mount) | A mount PL05 inductive sensor | V0.2 | 2023-07-13T14:30:27+00:00 | -| alanho | [BTT PITFT50 v2 Mount](alanho/BTT_PITFT50_v2_Mount) | A mount for the BTT PITFT50 v2 Touch Display | V2.4 | 2023-10-24T08:48:08+00:00 | -| albert | [IKEA Dioder Led Mount](albert/IKEA_Dioder_Led_Mount) | A mount for the IKEA Dioder LED strip | V2.4 | 2023-12-21T00:45:44+00:00 | -| antoinecellerier | [DS18B20 Sensor Mount](antoinecellerier/ds18b20-sensor-mount) | DS18B20 temperature sensor mount | V0.2 | 2023-07-15T11:51:22+00:00 | -| ardichoke | [V0 Long Thumb Nut](ardichoke/v0-long-thumb-nut) | Taller thumb nuts for V0 bed | V0.2 | 2023-07-15T11:51:22+00:00 | -| arkeet | [Dial test indicator mount](arkeet/dti-mount) | A toolhead mount for a dial test indicator, where the tip is... | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Magnetic hotend fan cover](arkeet/magnet-fan-cover) | A replacement hotend fan cover, held with magnets instead of screws. | V1.8, V2.4, VSW | 2023-07-13T14:30:27+00:00 | -| | [MGN12 X-axis](arkeet/mgn12) | Replaces the dual MGN9H rails with a single MGN12H. | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [V0 DC inlet](arkeet/v0-dc-inlet) | Skirt inlet for external 24V DC power supply. | V0.2 | 2023-07-13T14:30:27+00:00 | -| baccula | [Revo Nozzle Holder for v2.4 350](baccula/revo_skirt_nozzle_holder) | A remix of Andre's design allowing for skirt storage of 4 E3D Revo... | V2.4 | 2023-07-13T14:30:27+00:00 | -| beaugalbraith | [Nova Printhead](beaugalbraith/Nova_Printhead) | Use Nova Hotend with Afterburner | V2.4 | 2023-07-13T14:30:27+00:00 | -| bobbleheed | [Filament Runout Sensor](bobbleheed/Filament_Runout) | Filament runout sensor that replaces the stock bowden retainer | V1.8, V2.4, VT | 2023-07-15T11:51:22+00:00 | -| | [Magnetic Panels](bobbleheed/Magnetic_Panels) | Magnetic clips to allow for easy removal and installation of panels | V2.4 | 2023-07-13T14:30:27+00:00 | -| btp | [Galileo chain mount (befenybay)](btp/Galileo_Switchwire_Chain_Mount) | Modified chain mount position to cater for difference with Galileo... | VSW | 2023-12-21T00:45:44+00:00 | -| buzzdalf | [v1.8/2.4 Afterburner connector...](buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | V1.8, V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Ender 3 Switchwire Taller Z Mod](buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | VSW | 2023-07-15T11:51:22+00:00 | -| | [Ender 3 Switchwire Y Tensioner Mod](buzzdalf/ytension) | Y Tension Mod | VSW | 2023-07-15T11:51:22+00:00 | -| bythorsthunder | [MGN9 Backers Idlers](bythorsthunder/MGN9_Backers) | New idler uppers for MGN9 Extrusion backers | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Stealthburner Rapido UHF](bythorsthunder/Stealthburner_Rapido_Uhf) | Stealthburner mod for Rapido UHF | V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| chirpy | [V0.1 Nozzle Wiper](chirpy/NozzleWiper) | Servo powered nozzle wiper and purge bucket | V0.2 | 2023-07-15T11:51:22+00:00 | -| | [Runout UnKlicky Sensor](chirpy/RunoutUnklicky) | Runout UnKlicky Sensor is a filament runout sensor with mounts for... | V0.2, V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| | [V0.1 Raised Tophat](chirpy/TipTophat) | Alternative Tophat design that uses stock panels and raises height... | V0.2 | 2023-07-15T11:51:22+00:00 | -| chri.kai.in | [20x20mm Profile Covers](chri.kai.in/20x20mm_Profile_Covers) | Provide overlapping and flush slot covers for 20x20mm slot6... | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| | [Angry CAM USB](chri.kai.in/Angry_CAM_USB) | Housing for small USB camera module, allowing mounting to gantry or... | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Exhaust Adapter 100mm](chri.kai.in/Exhaust_Adapter_100mm) | Replace 60mm exhaust fan with 100mm ventilation system adapter | V1.8, V2.4, VT | 2023-07-15T11:51:22+00:00 | -| chrisrgonzales | [270° Front Panel Hinge](chrisrgonzales/270_degree_hinge) | Hinges that have 270° of swivel, parametric CAD included | V2.4 | 2023-07-15T11:51:22+00:00 | -| christophmueller | [Phaetus and Zodiac Dragonfly BMO...](christophmueller/Phaetus_Dragonfly_BMO_Afterburner) | Covers both the original Phaetus variant as well as the Zodiac one. | V1.8, V2.4, VSW | 2023-07-15T11:51:22+00:00 | -| claytono | [Voron 2.4 Extrusion Jig](claytono/2.4-extrusion-jig) | A jig help align extrusions to get a properly square frame | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Fysetc S6 V2 Mount](claytono/fysetc-s6-v2-mount) | DIN Mount for the Fysetc S6 V2 controller | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| | [V0 Zip Tie Skirts](claytono/v0-zip-tie-skirts) | V0 skirts with small loops added along the top to allow zip tyiing... | V0.2 | 2023-07-13T14:30:27+00:00 | -| clee | [Monster8 DIN Rail Mounts](clee/Monster8_heatsert_mount) | DIN mount for Makerbase Monster8 V1/V2 controller | V2.4, VT | 2023-07-15T11:51:22+00:00 | -| cmrny | [V0.1 Motor Panel Modification](cmrny/v01_motor_panel_no_rub) | V0.1 Motor panel modification to keep umbilical and bowden tube... | V0.2 | 2023-07-13T14:30:27+00:00 | -| conqueror433 | [Voron Parts Logo](conqueror433/Voron_Parts_Logo) | Voron Parts Logo for your back panels, 3D Print or Laser Cut | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Voron V0.1 Parts Logo](conqueror433/Voron_V0.1_Parts_Logo) | Voron Parts Logo for your V0 deck panel | V0.2 | 2023-07-15T11:51:22+00:00 | -| consibonsi | [Y-Mod SW 9mm](consibonsi/Y-Mod_SW_9mm) | 9mm Y belt mod for SW | VSW | 2023-07-13T14:30:27+00:00 | -| csch0 | [SW Fan Mount No Tape](csch0/SW_FanMount_No_Tape) | 60x20 Fan Mount for SW without tape | VSW | 2023-07-15T11:51:22+00:00 | -| d3nny | [Filtered Power Plug with...](d3nny/mains_plug_panel_for_RND_165-00057) | Filtered Power Plug for RND 165-00057 and CAT6-Plug | V2.4 | 2023-07-13T14:30:27+00:00 | -| davidauvergne | [Center_cable_management_duct](davidauvergne/Center_cable_management_duct) | Mod for a centered cable management | V2.4 | 2023-07-15T11:51:22+00:00 | -| dePrintinator | [HEPA Exhaust](dePrintinator/HEPA_Filter_Exhaust) | HEPA filter chamber exhaust replacement. | V1.8, V2.4, VT | 2023-07-15T11:51:22+00:00 | -| deepfriedheroin | [v0 Wago Bed Mounts](deepfriedheroin/v0_bed_wagos) | Easy to install Wago mounts for the v0 | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [v0 Power Wagos](deepfriedheroin/v0_power_wagos) | Easy to install Wago mounts for v0 mains | V0.2 | 2023-12-21T00:45:44+00:00 | -| | [V2 Bed Wagos](deepfriedheroin/v2_bed_wagos) | Wire management for the v2 bed | V2.4 | 2023-07-13T14:30:27+00:00 | -| doubletrouble | [V0 Skirt Mod](doubletrouble/V0_Skirt_Mod) | V0 Skirt Mod | V0.2 | 2023-07-13T14:30:27+00:00 | -| eamars | [Stealthburner (RC1) Dragon...](eamars/stealthburner_crazy_dragon_toolhead) | The Stealthburner toolhead mount for Mellow Crazy, TriangleLab... | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| eddie | [LED Bar Clip](eddie/LED_Bar_Clip) | Modular LED Clip for mounting LED Strip to 2020 Extrusions | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | -| | [V1.8 12mm Z Mod](eddie/V1.8_12mm_Z_Mod) | Add V1.8 option for 12mm Z rods | V1.8 | 2023-12-21T00:45:44+00:00 | -| edwardyeeks | [Tridentified V2.4 Power Inlet](edwardyeeks/Tridentified_V2.4_Power_Inlet) | Trident style side power inlet for V2.4 using Z Drive Motor... | V2.4 | 2023-07-13T14:30:27+00:00 | -| elcrni | [Trident Internal Spool Holder](elcrni/Trident_Internal_Spool_Holder) | Internal spool holder for 300 and 350 Tridents. Supports full size... | VT | 2023-12-21T00:45:44+00:00 | -| | [V.24/Trident Spool Holder](elcrni/V2.4-Trident-Spool-Holders) | Spool holder that mounts on top for "too close to the wall" printers | V1.8, V2.4, VT | 2023-12-21T14:04:19+00:00 | -| evandepol | [Crydom GN Terminal Guard](evandepol/Crydom-GN-Guard) | A simple safety guard for the terminals on a Crydom GN SSR | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Voron 2.4 cable clamps](evandepol/Voron2.4-Cable-clamps) | A set of 2020-mounted cable guards to organize and dress the wiring... | V2.4 | 2023-07-15T11:51:22+00:00 | -| falo | [LGX Lite CAN Side Mount](falo/lgx_lite_side_can) | A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| | [Magnetic Exhaust Grill Cover](falo/magnetic_grill_cover) | A magnetic cover to seal the filtered exhaust | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Toolhead PCB to CAN Mount Adaptor](falo/toolhead_pcb_to_can) | A mount to enable side mounting of a CAN board (Huvud/SHT42) in... | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| filotto78 | [6mm slot cover](filotto78/6mm_slot_cover) | Simple cover for extrusion with 6mm slot width | V2.4 | 2023-07-13T14:30:27+00:00 | -| frankaf | [Euclid Probe Carriage](frankaf/mgn12-euclid) | A MGN-12 carriage with an inset mount for a Euclid Probe | V1.8, V2.4, VT | 2023-07-17T22:40:39+00:00 | -| gamebofh | [Laser cut door panels](gamebofh/door-panels) | Files to allow you to create laser cut door panels with some... | VSW | 2023-07-15T11:51:22+00:00 | -| gauravmm | [Crazy Mozzie HF toolhead SB+CW2](gauravmm/crazy_mozzie_cw2) | Toolhead for Crazy Mozzie HF, compatible with Stealthburner and... | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| gen2eng | [Switchwire LED wire pass through](gen2eng/z_carriage_stop_pass_through) | Z Carriage Stop modification that makes pass through of wires for... | VSW | 2023-07-15T11:51:22+00:00 | -| geoffreyyoung | [Dual Rail Installation Guide](geoffreyyoung/dual_rail_guide) | Rail installation guide that also works for the 2.4 dual rail... | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [LGX Info, Links, and Models](geoffreyyoung/lgx) | Useful information and models for using the Bondtech LGX extruder... | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| gerritwellen | [Manta M8P Mount](gerritwellen/manta-m8p-bracket) | Mounting Bracket for BTT Manta M8P | V2.4, VT | 2023-07-13T14:30:27+00:00 | -| golas | [V0.1 Extended tophat hinge](golas/v0-extended-tophat-hinge) | Extended tophat for v0.1 with hinges (integrated or screwed ones). | V0.2 | 2023-07-15T11:51:22+00:00 | -| | [V0.1 Trident skirt remix with...](golas/v0-trident-skirt-mix) | Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain... | V0.2 | 2023-07-15T11:51:22+00:00 | -| hartk1213 | [Voron0.2 2.8 Waveshare Display](hartk1213/Voron0.2_2.8_WaveshareDisplay) | 2.8 Waveshare display for V0.2 | V0.2 | 2023-07-15T11:51:22+00:00 | -| | [Voron0.2 Rear Keystone Skirt](hartk1213/Voron0.2_Rear_Keystone_Skirt) | Added keystone slot on rear skirt for V0.2 | V0.2 | 2023-07-13T14:30:27+00:00 | -| | [Voron0 C14Inlet](hartk1213/Voron0_C14Inlet) | Added a new Power inlet that uses a Fused C14 plug and switch that... | V0.1 | 2023-12-21T00:45:44+00:00 | -| | [Voron0 ExtendedLegs](hartk1213/Voron0_ExtendedLegs) | New extended legs to raise the printer up a tiny bit more | V0.1 | 2023-07-15T11:51:22+00:00 | -| | [Voron0 ExtrusionSkirt](hartk1213/Voron0_ExtrusionSkirt) | Created a new skirt design that uses 50mm extrusions as legs and it... | V0.1 | 2023-07-15T11:51:22+00:00 | -| | [Voron0 Hinged Top Hat](hartk1213/Voron0_Hinged_Top_Hat) | Created a new hinged top hat design for the V0 so it can fold away... | V0.1 | 2023-07-15T11:51:22+00:00 | -| | [Voron0 MGN9C X Axis](hartk1213/Voron0_MGN9C_X_Axis) | This mod, replaces the stock MGN7H for MGN9C on the V0 | V0.1 | 2023-07-15T11:51:22+00:00 | -| | [Voron0 deck panel](hartk1213/Voron0_deck_panel_with_logo_and_VORON0) | Used @Kruppes blank deck panel to add the logo as well as the name... | V0.1 | 2023-10-24T11:32:29+00:00 | -| | [Voron0 display dualcolor](hartk1213/Voron0_display_dualcolor) | Added a dual color file for the Voron Display Front housing | V0.1 | 2023-07-15T11:51:22+00:00 | -| | [Voron2.4 GE5C](hartk1213/Voron2.4_GE5C) | This mod replaces the stack of printed z joints with a metal... | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Voron2.4 SexBolt ZEndstop](hartk1213/Voron2.4_SexBolt_ZEndstop) | This mod replaces stock V2 Z endstop with a different style | V2.4, VT | 2023-07-15T11:51:22+00:00 | -| | [Voron2.4 and Trident Pins Mod](hartk1213/Voron2.4_Trident_Pins_Mod) | This mod replaces all the M5 screws for all idlers/pulleys/bearings... | V2.4, VT | 2023-07-15T11:51:22+00:00 | -| | [Voron2.4 Y Endstop Relocation](hartk1213/Voron2.4_Y_Endstop_Relocation) | This mod relocates the Y endstop to the top A drive piece | V2.4 | 2023-07-15T11:51:22+00:00 | -| henrikssn | [Parametric Spool Holder](henrikssn/parametric_spool_holder) | Spool holder where the length is a parameter. | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | -| | [Plug Panel Mod for Generic...](henrikssn/plug_panel_generic) | v2.4 plug panel for generic unfiltered modules with 66mm x 27mm... | V2.4 | 2023-07-13T14:30:27+00:00 | -| hergtoler | [Exhaust Housing for 120mm Fan...](hergtoler/exhaust_120mm_duct) | v2.4 Exhaust Housing for 120mm Fan and 4in Duct | V2.4 | 2023-07-15T11:51:22+00:00 | -| hernsl | [Bottom Panel Mag Clip](hernsl/bottom_panel_mag_clip) | v2.4 magnetic clips to retain bottom panel | V2.4 | 2023-07-15T11:51:22+00:00 | -| hhammarstrand | [Afterburner connector cover for...](hhammarstrand/afterburner_connector_cover_42STH20-1004AS) | Connector cover for 42STH20-1004AS | VSW | 2023-10-24T11:32:29+00:00 | -| hijax_pl | [Corner panel clip](hijax_pl/corner_panel_clip) | V2 panel corner frames using 3-way L brackets in the corners | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Din Rail mount](hijax_pl/din_rail_mount) | Adapter to attach DIN Rail to 2020 extrusion. | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [Controler Board adapters](hijax_pl/ender_compatible_controller_mount) | DIN (rotated) and legacy adapters for boards like SKR mini E3. | V2.4 | 2023-07-13T14:30:27+00:00 | -| hoschi | [FYSETC Spider DIN Rail Mount](hoschi/FYSETC_Spider_DIN_Mount) | DIN rail mount for FYSETC Spider | V2.4 | 2023-07-15T11:51:22+00:00 | -| hymness1 | [10x11mm chain VSW](hymness1/10x11mm_chain_VSW) | Printable and openable 10x11mm chain | V0.2, VSW | 2023-07-13T14:30:27+00:00 | -| | [Quickdraw probe Voron Switchwire](hymness1/Quickdraw_probe_Voron_Switchwire) | Detachable magnetic probe with docking system for VSW | VSW | 2023-07-15T11:51:22+00:00 | -| iblue | [V0.1 Tophat Extractor](iblue/TophatExtractor) | Tophat Extractor for the Voron V0.1 with activated charcoal and... | V0.2 | 2023-07-13T14:30:27+00:00 | -| jangrewe | [Bitter USB Cam](jangrewe/Bitter_USB_Cam) | Modification of the "Angry Cam USB v2.0" webcam mount for 1515... | V0 | 2023-10-24T08:41:48+00:00 | -| jappaj | [V0.1 FanSaver](jappaj/FanSaver) | A printable fix for overheating V0.1 blower fans | V0.2 | 2023-07-15T11:51:22+00:00 | -| jasonc | [V2.4 Z-Idler Shoulder Bolt Mod](jasonc/Z_Idler_Shoulder_Bolt) | Modification to the idler carriers to accept a 25mm shoulder bolt.... | V2.4 | 2023-07-15T11:51:22+00:00 | -| jatson | [Plug panel mod for Schurter...](jatson/plug_panel_schurter) | A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151... | V2.4 | 2023-07-13T14:30:27+00:00 | -| jaysuk | [4.3 Fly Screen Mount](jaysuk/4.3_fly_screen_mount) | A mount for a 4.3" Fly Screen | V0, V0.1 | 2023-07-15T11:51:22+00:00 | -| jeoje | [4.3" Touchscreen Mount](jeoje/4.3_Inch_Touchscreen_Mount) | Mounts a [Waveshare 4.3inch Capacitive Touch... | V2.4, VSW | 2023-07-13T14:30:27+00:00 | -| | [Molex MLX and Microfit 3.0 Bed...](jeoje/Molex_MLX_Microfit_Bed_Connector_Mount) | Solid mount your bed connectors | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Sturdy Handles](jeoje/Sturdy_Handles) | Modified v2.2 handles with no panel rest and with 4 anchor points | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [V2.4 Z Chain Guide with...](jeoje/Z_Chain_Guide_Thermistor_Mount) | Modifies the Z chain guide to hold a chamber thermistor | V2.4 | 2023-07-15T11:51:22+00:00 | -| jgehrig | [V0 LCD Touchscreen Skirt](jgehrig/v0_lcdskirt) | 3.2" LCD Touch Screen Skirt | V0.2 | 2023-07-15T11:51:22+00:00 | -| johanncc | [Raspberry Pi Camera Mount](johanncc/Raspberry_Pi_Camera_Mount) | Low profile raspberry pi camera mount | V0.2 | 2023-07-15T11:51:22+00:00 | -| joposter | [V0 Clippable LED Caselight](joposter/v0_clippable_ledmounts) | LED Case light for the V0 that clips into the extrusions | V0.2 | 2023-07-15T11:51:22+00:00 | -| khay | [Fan for V2-200mm²](khay/V2-200_4020_Electronics_Fan) | Middle Skirt for V2-200mm² Electronics Compartment | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [3x Keystone PlugPanel](khay/V2_3x_Keystone_Plugpanel) | PlugPanel with Options for 3 Keystones | V2.4 | 2023-07-15T11:51:22+00:00 | -| | [V0 Micro Backplate](khay/micro_backplate) | Minimalistic backplate for cooler motors and electronics | V0.2 | 2023-07-15T11:51:22+00:00 | -| kirby | [V0 Sherpa Mini Direct Drive Mod](kirby/v0_sherpa_mini_direct_drive) | A direct drive mod for the V0 using the Annex Sherpa Mini extruder | V0.2 | 2023-07-13T14:30:27+00:00 | -| lakai | [Bruag Skirts](lakai/Bruag_Skirts) | V2 350mm skirts inspired by Bruag Facades | V2.4 | 2023-07-13T14:30:27+00:00 | -| leandromarceddu | [PowerSkirt](leandromarceddu/PowerSkirt) | Modified skirtpiece for a digital power monitor | V2.4 | 2023-07-13T14:30:27+00:00 | -| littleferris | [V0 c14 Skirt Inlet](littleferris/V0_Skirt_Inlet) | V0 C14 Skirt inlet | V0.2 | 2023-07-13T14:30:27+00:00 | -| madfabrications | [Vertical PSU Mount](madfabrications/Vertical_PSU_Mount) | Mounts the PSU vertically on the DIN rails | V2.4 | 2023-07-13T14:30:27+00:00 | -| madros | [V0 OLED-skirt](madros/V0_skirt_OLED) | V0 skirt with 0.96" OLED | V0.2 | 2023-07-15T11:51:22+00:00 | -| maximilian-foerg | [Afterburner Turbo Mod](maximilian-foerg/AB_Turbo_Mod) | A purely cosmetic mod for Afterburner | V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | -| | [Switchwire Double 60mm Fan Mount](maximilian-foerg/VSW_Double_60mm_Fan_Mount) | A mount for two (or four) 60mm fans in SW's electronics compartment | VSW | 2023-07-15T11:51:22+00:00 | -| mikepthomas | [MKS Mosfet Mount](mikepthomas/MKS_Mosfet_Mount) | MKS Mosfet Mount based of the Trident Raspberry Pi Mount. | V1.8, V2.4, VT | 2023-07-15T11:51:22+00:00 | -| mjoaris | [10x11 Cable Chain Endcaps](mjoaris/10x11_Cable_Chain_Endcaps) | Printable Endcaps for 10x11 Cable Chains | V1.8, V2.4 | 2023-07-15T11:51:22+00:00 | -| | [Mini12864 LCD Mount](mjoaris/Mini12864_LCD_Mount_for_V2.4) | Swiveling case for the Fysetc Mini12864 LCD | V2.4 | 2023-07-15T11:51:22+00:00 | -| mosher | [Door hinges with M3 screws shafts](mosher/m3_door_hinges) | Simple mod of print in place door hinges, which uses m3 screws as... | V2.4 | 2023-12-21T00:45:44+00:00 | -| mpfl | [V0.1 OLED-skirt](mpfl/V0.1_skirt_OLED) | V0.1 skirt with 0.96" OLED | V0.2 | 2023-07-13T14:30:27+00:00 | -| muradir | [Zodiac BMO Stealthburner Toolhead](muradir/Zodiac_BMO_Stealthburner_Toolhead) | A Stealthburner toolhead for the Zodiac BMO Hotend, based on the... | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | -| natewalck | [V1.8 Jigs](natewalck/v1.8_Jigs) | Jigs for assembling V1.8 | V1.8 | 2023-07-13T14:30:27+00:00 | -| nhchiu | [V0.1 Movable Pulley Z Drive](nhchiu/V0.1_Movable_Pulley_Z) | A movable pulley system on the Z axis with 1:8 total speed ratio... | V0.1 | 2023-07-15T11:51:22+00:00 | -| nikolasbabetas | [Neopixel Holder](nikolasbabetas/Neopixel_Holder) | A holder to attach Neopixel/WS2812B Led Strips to the V0.1 | V0.1 | 2023-07-15T11:51:22+00:00 | -| ommy | [roller brackets](ommy/roller_brackets) | Brackets to help rolling V2 on its side. | V2.4 | 2023-11-13T15:23:59+00:00 | -| oxno | [RBP Zero Bracket](oxno/rbp_zero_braket) | Bracket for Raspberry pi zero. | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| padok | [Chain Anchor - ADXL345 mount Mod](padok/chain_anchor-ADXL345_mount) | A ADXL345 mount for the Afterburner | V2.4 | 2023-07-15T11:51:22+00:00 | -| piet206 | [V1.8 Z Rails Mod](piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion | V1.8 | 2023-10-24T11:32:29+00:00 | -| ponkotsu1 | [V0 Launchpad Skirt](ponkotsu1/V0_Launchpad_Skirt) | Another style V0 skirt | V0 | 2023-12-21T00:45:44+00:00 | -| prasadp4009 | [StealthBurner CR Touch Mod](prasadp4009/SW_SB_CRTouch) | Voron SW StealthBurner CR Touch Mod | VSW | 2023-07-13T14:30:27+00:00 | | quattroerik | [V2.4 Door Hinge M3 3mm 180deg](quattroerik/front_door_m3_180_deg_3mm) | Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw... | V2.4, VT | 2023-07-15T11:51:22+00:00 | | randell | [Door Hinges](randell/Door_Hinges) | Door hinges that use an M3 bolt for a pin and bolts thru the panel | V2.4 | 2023-07-15T11:51:22+00:00 | | | [Microswitch Pod for PCB](randell/Microswitch_Endstop) | Modified endstop pod for use of endstop switches mounted on a PCB | V2.4 | 2023-07-15T11:51:22+00:00 | | raymondh | [Large Spool Holders](raymondh/LargeSpoolHolders) | Larger spool holders for KVP spools | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | -| reQu1em00 | [Kirigami LED Bed Front](reQu1em00/Kirigami_LED_Bed_Front) | Kirigami bed front with space for a single LED or Neopixel button | V0.2 | 2023-10-24T11:32:29+00:00 | | reapola | [MKS CANable Pro DIN Mount](reapola/MKS_CANable_Pro_mount) | MKS CANable Pro mount which mounts on a DIN rail | V0.2, V1.8, V2.4, VSW, VT | 2023-07-15T11:51:22+00:00 | +| reQu1em00 | [Kirigami LED Bed Front](reQu1em00/Kirigami_LED_Bed_Front) | Kirigami bed front with space for a single LED or Neopixel button | V0.2 | 2023-10-24T11:32:29+00:00 | | revnull | [Raspberry Pi 7inch Display Mount](revnull/rpi_7in_display_mount) | An articulating mount for the offical Raspberry Pi 7inch touch screen | V2.4 | 2023-07-15T11:51:22+00:00 | +| Rhastlyn | [60mm Fan Cover](Rhastlyn/60mmFanCover) | A easy to install cover for spec 60mm fans originally designed for... | V2.4 | 2023-07-13T14:30:27+00:00 | +| | [Wansview 1080p Camera Mount](Rhastlyn/WansviewCameraMount) | A camera mount that replaces the OEM part to allow the camera to be... | V2.4 | 2023-07-14T13:24:54+00:00 | | richardjm | [ADXL drag chain mount](richardjm/adxl-chain) | Permanent mount for ADXL boards on the back of the motor, replacing... | V2.4 | 2023-07-15T11:51:22+00:00 | | | [Back blanking plate](richardjm/back-plate) | Back blanking plate that can be used instead of the exhaust filter... | V2.4 | 2023-07-13T14:30:27+00:00 | | | [LED 15.5mm quarter round mounts](richardjm/led-mounts) | Mounting corners with integrated cable runs for 15.5mm quarter... | V2.4 | 2023-07-13T14:30:27+00:00 | @@ -354,6 +325,7 @@ Printer mods for Voron 3D printers | | [Printable snap latches for 2020...](richardjm/snap-latch-2020) | Quick release panel latch inspired by the work of others. | V2.4 | 2023-12-21T00:45:44+00:00 | | rngSplat | [Printable Switchwire Deck Plate](rngSplat/SW_Deck_Plate) | Print a deck plate for Switchwire with debossed Voron logo | VSW | 2023-10-24T11:32:29+00:00 | | roboticator24 | [Touchscreen for OctoDash](roboticator24/4inch_touchscreen_mount_for_v2.4) | Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual... | V2.4 | 2023-10-24T11:32:29+00:00 | +| RockNLol | [RockNRoll](RockNLol/RockNRoll) | Rockers to roll the printer on its back for easier access to the... | V2.4 | 2023-07-14T13:24:54+00:00 | | rsheng118 | [BTT octopus DIN vertical mount](rsheng118/BTT_octopus_DIN_vertical_mount) | DIN vertical mount for Big Tech Tree Octopus board | V2.4 | 2023-07-15T11:51:22+00:00 | | ruiqimao | [V0.2 MGN9C X Axis](ruiqimao/V0.2_MGN9C_X) | MGN9C linear rail for the X axis on V0.2 | V0 | 2023-10-26T04:44:49+00:00 | | ryandam | [Cable Management Duct](ryandam/Cable_management_duct) | Zip tie mount intergrated cable duct to hide your cable | V0.2 | 2023-07-13T14:30:27+00:00 | @@ -367,14 +339,28 @@ Printer mods for Voron 3D printers | | [Microfit 2x3 Skirt Connector (ADXL)](samwiseg0/microfit_2x3_skirt_connector_adxl) | Mod for a Microfit 2x3 connector to be mounted in a skirt | V2.4 | 2023-07-15T11:51:22+00:00 | | | [Corsair Flash Voyager GTX Din Mount](samwiseg0/voyager_gtx_din_mount) | Din carrier for a Corsair Flash Voyager GTX | V2.4, VT | 2023-07-15T11:51:22+00:00 | | scanlory | [Clip-On Front Door Frame](scanlory/clip_on_door_frame) | Clip-on frame to stiffen and seal front door panels when using... | V2.4 | 2023-07-13T14:30:27+00:00 | +| ScramblerUSA | [Side Skirt Power Switch](ScramblerUSA/SideSkirtPowerSwitch) | Skirt-mounted rocker switch for easy access for Voron 2.4 | V2.4 | 2023-07-14T13:24:54+00:00 | +| See1807 | [TopHat Exhaust and LED Light](See1807/Voron_V0_Exhaust_and_LED_Mod) | A mount for 10mm LED strips and Exhaust for Voron V0 | V0.2 | 2023-07-13T14:30:27+00:00 | +| Shiftingtech | [Trident Dual Power Switch](Shiftingtech/Trident_dual_power_switch) | A replacement skirt, allowing 2 power switches | VT | 2023-07-13T14:30:27+00:00 | +| ShinyPants | [OrangePi 3 LTS DIN Rail bracket](ShinyPants/Orange_Pi_3_LTS_DIN) | A DIN rail mount for OrangePi LTS 3 | V1.8, V2.4, VT | 2023-07-13T14:30:27+00:00 | +| Shteeeeeve | [V0.1 LED Tophat](Shteeeeeve/V01-LED-Tophat) | V0.1 LED Tophat w/ 24V LED Lightstrip | V0.2 | 2023-07-14T13:24:54+00:00 | +| Slidr | [PanzerBalls 2.4](Slidr/PanzerBalls2.4) | Squash Ball Feet for V2.4 | V2.4 | 2023-07-14T13:24:54+00:00 | +| | [PanzerChain 2.4](Slidr/PanzerChain2.4) | Energychain for V2.4 | V2.4 | 2023-07-13T14:30:27+00:00 | | slitte | [PCB_Probe](slitte/PCB_Probe) | PCB for BAT85 and pull up resistor | V2.4, VT | 2023-07-13T14:30:27+00:00 | | | [ssd_bracket](slitte/ssd_bracket) | bracket for mounting a 2.5" ssd to a din rail | V2.4, VT | 2023-07-13T14:30:27+00:00 | | sloscotty | [Switchwire Wall Plate](sloscotty/SW_Wall_Plate) | SW plate for enclosure | VSW | 2023-07-15T11:51:22+00:00 | | | [NoNutz TopHat Cam Extension](sloscotty/TopHat_Cam_Extension) | Tophat extension with integrated webcam for V0/0.1 | V0.2 | 2023-07-15T11:51:22+00:00 | | spacelab2021 | [Orbiter Clockwork Mount](spacelab2021/Orbiter-Clockwork) | A clockwork adaptor for the Orbiter v1.5 Extruder with full... | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | +| Spaghetti-Bolognese | [LCD Case Mod](Spaghetti-Bolognese/LCD_case_mod) | Improvements to the V2.4 mini12864 LCD case inc E-stop button cover | V2.4 | 2023-07-14T13:24:54+00:00 | +| | [Simplified Z Drive Motor Mount](Spaghetti-Bolognese/Z_drive_motor_mount) | Z drive motor mount bracket mod to improve pulley to belt alignment | V2.4 | 2023-12-21T00:45:44+00:00 | | sse018 | [Octopus DIN Rail bracket](sse018/Octopus_DIN_Rail_bracket) | A Din rail mount for BTT Octopus board | V2.4 | 2023-07-13T14:30:27+00:00 | | strayr | [Creality toolhead for stealthburner](strayr/stealthburner_creality_toolhead) | Use a creality ender 3 style hotend with stealthburner | V1.8, V2.4, VSW | 2023-07-15T11:51:22+00:00 | | sttts | [Waveshare 5.5inch HDMI AMOLED Mount](sttts/Waveshare-5.5-inch-HDMI-AMOLED) | Mod to mount a Waveshare 5.5inch full HD display on a V2 | V2.4, VSW | 2023-07-15T11:51:22+00:00 | +| StvPtrsn | [Skirts for a 320mm Build](StvPtrsn/320mm_Build) | Skirts for a 320mm build | V2.4 | 2023-07-14T13:24:54+00:00 | +| | [Keystone Jack for Filtered Mains...](StvPtrsn/Keystone_Jack_Filtered_Mains_Panel) | Add a keystone jack to your filtered mains plug panel | V2.4 | 2023-07-13T14:30:27+00:00 | +| | [Parts_Jigs and Mods](StvPtrsn/Parts_Jigs_and_Mods) | Parts, Jigs and modifications I use for my builds | V0.2, V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | +| | [Side Fan Support, No Tape](StvPtrsn/Side_Fan_Support_No_Tape) | Mount the 60mm side fans and inserts without tape | V2.4 | 2023-07-14T13:24:54+00:00 | +| Takuya | [WANSVIEW USB Camera Mount](Takuya/USBCameraMount) | WANSVIEW 1080p Camera Mount for Voron 2.4 | V2.4 | 2023-07-13T14:30:27+00:00 | | tallman5 | [Z Locks](tallman5/z-locks) | Helping hands curing v2.4 build, replaces long zip ties. | V2.4 | 2023-07-15T11:51:22+00:00 | | tameike | [Din Rail 2020 Holder](tameike/DIN_Rail_2020_holder) | Attaching DIN Rails to 2020 | V2.4 | 2023-12-21T00:45:44+00:00 | | | [Din Rail SKR 90 deg](tameike/DIN_Rail_SKR_1.3_90deg) | SKR V1.3 bracket turned 90 degrees | V2.4 | 2023-10-24T11:32:29+00:00 | @@ -384,9 +370,19 @@ Printer mods for Voron 3D printers | teookie | [AB dial indicator mount](teookie/AB_dial_indicator_mount) | Mount for attaching standard dial indicators to AB | V1.8, V2.4, VSW | 2023-07-13T14:30:27+00:00 | | | [SKR Brace](teookie/skr_brace) | Rigidize and stabilize SKR 1.4 mounts | V2.4 | 2023-07-15T11:51:22+00:00 | | th0mpy | [BEEFY Din Clips](th0mpy/beefy-din) | Two piece BEEFY Din Clips, holds stronger | V2.4 | 2023-07-15T11:51:22+00:00 | +| TheSquiffy | [V0 Belts holder](TheSquiffy/V0_Belts_holder) | V0 Belts Holder | V0.2 | 2023-07-14T13:24:54+00:00 | +| TiagoBarata | [Logitech C270 Mount](TiagoBarata/Logitech_C270_Mount) | Logitech C270 Top Center Mount | V2.4 | 2023-07-14T13:24:54+00:00 | +| Tircown | [DIN mount RS-15-5 PSU](Tircown/DIN_mount_RS-15-5) | A DIN mount for the RS-15-5 | V2.4 | 2023-07-13T14:30:27+00:00 | +| | [Display mount 5"](Tircown/Display_mount_5inch) | Tiltable mount for a 5" tactile display | V2.4 | 2023-07-14T13:24:54+00:00 | +| | [Raspberry in plug panel](Tircown/Raspberry_plug_panel) | Raspberry mount vertically in the plug panel, allow easy access to... | V2.4 | 2023-07-14T13:24:54+00:00 | +| | [V0.1 Skirt buttons](Tircown/V01_skirt_buttons) | Buttons for V0.1 spec skirts | V0.2 | 2023-07-14T13:24:54+00:00 | | togi | [Exhaust housing side fitting](togi/exhaust_housing_side_fitting) | Moves the exhaust housing bowden fitting 90 degrees to allow the... | V2.4 | 2023-12-21T00:45:44+00:00 | | top_gun_de | [mount_for_umbilical](top_gun_de/mount_for_umbilical) | Umbilical guide that goes on the chain anchor | V2.4 | 2023-07-13T14:30:27+00:00 | +| Triano | [Ender 3 Pro or V2 to Switchwire Mod](Triano/Ender_3Pro_Switchwire) | Convesion of an Ender 3 Pro or V2 to a Switchwire | VSW | 2023-07-14T13:24:54+00:00 | +| Ultrawaffles | [Ender 3 to SW conversion](Ultrawaffles/Ender_3_to_SW) | A conversion mod for the ender 3 to switchwire. Designed to allow... | VSW | 2023-10-24T11:32:29+00:00 | +| VinnyCordeiro | [RGB LED grid for Stealthburner](VinnyCordeiro/RGB_LED_grid_for_SB) | A small RGB LED grid for Stealthburner's logo | V1.8, V2.4, VSW, VT | 2023-07-13T14:30:27+00:00 | | warriorofwire | [Slenderfan for Afterburner](warriorofwire/slenderfan) | Lighter, quieter, smaller Afterburner | V2.4 | 2023-07-15T11:51:22+00:00 | +| Weaslus | [Electronics Bay and Enclosure...](Weaslus/Electronics-Bay-Seperator) | Better enclose chamber and keep heat from electronics | V0.2 | 2023-07-13T14:30:27+00:00 | | whoppingpochard | [Extrusion Backers](whoppingpochard/extrusion_backers) | Laser-cut metal pieces to counteract bimetallic frame warping | V2.4 | 2023-07-13T14:30:27+00:00 | | wile-e1 | [Deck Panel Support Clips](wile-e1/Deck_Panel_Support_Clips) | Clips to help support lower deck panels to prevent (or fix) warping: | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | | | [Stealthburner + CW1 + PCB Cover](wile-e1/Stealthburner_CW1_PCB_Cover) | Low-poly for Stealthburner + CW1 + PCB installations: | V1.8, V2.4, VSW | 2023-07-15T11:51:22+00:00 | @@ -397,8 +393,8 @@ Printer mods for Voron 3D printers | | [DuetZero](xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | V0.2, V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | | | [Easy Access Rear Panels](xbst_/Easy_Access_Rear_Panels_v0) | New rear panels designed to expose the extruder for easy filament... | V0.2 | 2023-07-13T14:30:27+00:00 | | | [Flat V2.4 Skirts](xbst_/Flat_Skirts) | Flat V2.4 Skirts so a panel without cutouts can be used | V2.4 | 2023-07-13T14:30:27+00:00 | -| | [HOYMK SSR Mount](xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | V0.2 | 2023-07-13T14:30:27+00:00 | | | [Hat LED Mount](xbst_/Hat_LED_Mount) | Top Hat LED module mount | V0.2 | 2023-07-13T14:30:27+00:00 | +| | [HOYMK SSR Mount](xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | V0.2 | 2023-07-13T14:30:27+00:00 | | | [PCB LED Holder](xbst_/LED_Holder) | Very simple mount for some (?) PCB LED Bars | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | | | [DIN Mount Max31865](xbst_/Max31865_DIN_Mount) | A simple DIN rail mount for the Adafruit (or SAME SIZE clone)... | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | | | [DIN Mount Omron Relay](xbst_/Omron_DIN_Mount) | A simple DIN rail mount for the BOM Relay | V1.8, V2.4 | 2023-07-13T14:30:27+00:00 | @@ -415,4 +411,9 @@ Printer mods for Voron 3D printers | yenda | [SW More Robust XZ Belt Paths](yenda/vsw_more_robust_belt_paths) | Small mods to belt routing components to ensure a better/more... | VSW | 2023-12-23T00:20:10+00:00 | | yeri | [V0 Magnetic Panels](yeri/V0_Magnetic_Panels) | Mount V0 panels with magnets, removes need for hinges and lets you... | V0.2 | 2023-07-13T14:30:27+00:00 | | | [V1 3Z](yeri/V1_3Z) | 3Z mod for V1 | V1.8 | 2023-07-15T11:51:22+00:00 | +| Zen3D | [V0 1515 T-nut](Zen3D/V0_1515_T-nut) | M3 square and hex nuts for Voron0 1515 frame | V0.2 | 2023-07-14T13:24:54+00:00 | +| | [V0 Handle](Zen3D/V0_Handle) | Voron0 Handle for 3mm panels | V0.2 | 2023-07-13T14:30:27+00:00 | +| | [V0 MidPanel HexPattern](Zen3D/V0_MidPanel_HexPattern) | Voron0 MidPanel with Hex pattern and Wire cover | V0.2 | 2023-07-14T13:24:54+00:00 | +| | [V0 Skirt set](Zen3D/V0_Skirt) | SSR, PowerSwitch, Adxl, Nameplate and color change printing | V0.2 | 2023-07-14T13:24:54+00:00 | | zruncho | [V0 No-Drop Nuts](zruncho/V0_No_Drop_Nuts) | Voron0 nut inserts which auto-align (LDO frames only) | V0.2 | 2023-07-15T11:51:22+00:00 | +| ZZP8202 | [Pull-out electrical store](ZZP8202/Pull-out_electrical_store) | Voron 2.4 Pull-out electrical store（350mm only） | V2.4 | 2023-07-14T13:24:54+00:00 | diff --git a/printer_mods/mods.json b/printer_mods/mods.json index 83f25b26c0..d20c0288cb 100644 --- a/printer_mods/mods.json +++ b/printer_mods/mods.json @@ -895,6 +895,14 @@ "printer_compatibility": "V1.8, V2.4, VT", "last_changed": "2023-07-14T13:24:54+00:00" }, + { + "path": "Liselotte111/Red_Lizard_K1_UHF", + "title": "Red Lizard K1 UHF toolhead", + "creator": "Liselotte111", + "description": "SB toolhead for Red Lizard K1 UHF", + "printer_compatibility": "V2, VT", + "last_changed": "2023-12-23T00:44:28+00:00" + }, { "path": "LoCoCNC/3mm_tophat_panel_parts", "title": "3mm Top Hat Panels Clips",