forked from JamesP6000/WsprryPi
-
Notifications
You must be signed in to change notification settings - Fork 0
/
README
251 lines (213 loc) · 10.9 KB
/
README
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
Raspberry Pi bareback LF/MF/HF/VHF WSPR transmitter
Makes a very simple WSPR beacon from your RasberryPi by connecting GPIO
port to Antenna (and LPF), operates on LF, MF, HF and VHF bands from
0 to 250 MHz.
Compatible with the original Raspberry Pi, the Raspberry Pi 2/3, and
the Pi Zero.
!!!!!!
2017-04-21
Do note that some users have been reporting lockups with recent OS versions.
I have not been able to reproduce the problems on my RPI1 and RPI3 running
the latest Jessie-Lite.
https://github.com/JamesP6000/WsprryPi/issues/6#issuecomment-296233932
!!!!!!
******
Installation / update:
******
Download and compile code:
sudo apt-get install git
git clone https://github.com/JamesP6000/WsprryPi.git
cd WsprryPi
make
Install to /usr/local/bin:
sudo make install
Uninstall:
sudo make uninstall
******
Usage: (WSPR --help output):
******
Usage:
wspr [options] callsign locator tx_pwr_dBm f1 <f2> <f3> ...
OR
wspr [options] --test-tone f
Options:
-h --help
Print out this help screen.
-p --ppm ppm
Known PPM correction to 19.2MHz RPi nominal crystal frequency.
-s --self-calibration
Check NTP before every transmission to obtain the PPM error of the
crystal (default setting!).
-f --free-running
Do not use NTP to correct frequency error of RPi crystal.
-r --repeat
Repeatedly, and in order, transmit on all the specified command line
freqs.
-x --terminate <n>
Terminate after n transmissions have been completed.
-o --offset
Add a random frequency offset to each transmission:
+/- 80 Hz for WSPR
+/- 8 Hz for WSPR-15
-t --test-tone freq
Simply output a test tone at the specified frequency. Only used
for debugging and to verify calibration.
-n --no-delay
Transmit immediately, do not wait for a WSPR TX window. Used
for testing only.
Frequencies can be specified either as an absolute TX carrier frequency, or
using one of the following strings. If a string is used, the transmission
will happen in the middle of the WSPR region of the selected band.
LF LF-15 MF MF-15 160m 160m-15 80m 60m 40m 30m 20m 17m 15m 12m 10m 6m 4m 2m
<B>-15 indicates the WSPR-15 region of band <B>.
Transmission gaps can be created by specifying a TX frequency of 0
Note that 'callsign', 'locator', and 'tx_power_dBm' are simply used to fill
in the appropriate fields of the WSPR message. Normally, tx_power_dBm should
be 10, representing the signal power coming out of the Pi. Set this value
appropriately if you are using an external amplifier.
******
Radio licensing / RF:
******
In order to transmit legally, a HAM Radio License is REQUIRED for running
this experiment. The output is a square wave so a low pass filter is REQUIRED.
Connect a low-pass filter (via decoupling C) to GPIO4 (GPCLK0) and Ground pin
of your Raspberry Pi, connect an antenna to the LPF. The GPIO4 and GND pins
are found on header P1 pin 7 and 9 respectively, the pin closest to P1 label
is pin 1 and its 3rd and 4th neighbour is pin 7 and 9 respectively. See this
link for pin layout: http://elinux.org/RPi_Low-level_peripherals
Examples of low-pass filters can be found here:
http://www.gqrp.com/harmonic_filters.pdf
TAPR makes a very nice shield for the Raspberry Pi that is pre-assembled,
performs the appropriate filtering for the 20m band, and also increases
the power output to 20dBm! Just connect your antenna and you're good-to-go!
https://www.tapr.org/kits_20M-wspr-pi.html
The expected power output is 10mW (+10dBm) in a 50 Ohm load. This looks
neglible, but when connected to a simple dipole antenna this may result in
reception reports ranging up to several thousands of kilometers.
As the Raspberry Pi does not attenuate ripple and noise components from the
5V USB power supply, it is RECOMMENDED to use a regulated supply that has
sufficient ripple supression. Supply ripple might be seen as mixing products
products centered around the transmit carrier typically at 100/120Hz.
DO NOT expose GPIO4 to voltages or currents that are above the specified
Absolute Maximum limits. GPIO4 outputs a digital clock in 3V3 logic, with a
maximum current of 16mA. As there is no current protection available and a DC
component of 1.6V, DO NOT short-circuit or place a resistive (dummy) load
straight on the GPIO4 pin, as it may draw too much current. Instead, use a
decoupling capacitor to remove DC component when connecting the output dummy
loads, transformers, antennas, etc. DO NOT expose GPIO4 to electro- static
voltages or voltages exceeding the 0 to 3.3V logic range; connecting an
antenna directly to GPIO4 may damage your RPi due to transient voltages such
as lightning or static buildup as well as RF from other transmitters
operating into nearby antennas. Therefore it is RECOMMENDED to add some form
of isolation, e.g. by using a RF transformer, a simple buffer/driver/PA
stage, two schottky small signal diodes back to back.
******
TX Timing:
******
This software is using system time to determine the start of WSPR
transmissions, so keep the system time synchronised within 1sec precision,
i.e. use NTP network time synchronisation or set time manually with date
command. A WSPR broadcast starts on an even minute and takes 2 minutes for
WSPR-2 or starts at :00,:15,:30,:45 and takes 15 minutes for WSPR-15. It
contains a callsign, 4-digit Maidenhead square locator and transmission
power. Reception reports can be viewed on Weak Signal Propagation Reporter
Network at: http://wsprnet.org/drupal/wsprnet/spots
******
Calibration:
******
As of 2017-02, NTP calibration is enabled by default and produces a
frequency error of about 0.1 PPM after the Pi has temperature stabilized
and the NTP loop has converged.
Frequency calibration is REQUIRED to ensure that the WSPR-2 transmission
occurs within the narrow 200 Hz band. The reference crystal on your RPi might
have an frequency error (which in addition is temp. dependent -1.3Hz/degC
@10MHz). To calibrate, the frequency might be manually corrected on the
command line or a PPM correction could be specified on the command line.
NTP calibration:
NTP automatically tracks and calculates a PPM frequency correction. If you
are running NTP on your Pi, you can use the --self-calibration option to
have this program querry NTP for the latest frequency correction before
each WSPR transmission. Some residual frequency error may still be present
due to delays in the NTP measurement loop and this method works best if your
Pi has been on for a long time, the crystal's temperature has stabilized,
and the NTP control loop has converged.
AM calibration:
A practical way to calibrate is to tune the transmitter on the same frequency
of a medium wave AM broadcast station; keep tuning until zero beat (the
constant audio tone disappears when the transmitter is exactly on the same
frequency as the broadcast station), and determine the frequency difference
with the broadcast station. This is the frequency error that can be applied
for correction while tuning on a WSPR frequency.
Suppose your local AM radio station is at 780kHz. Use the --test-tone option
to produce different tones around 780kHz (eg 780100 Hz) until you can
successfully zero beat the AM station. If the zero beat tone specified on the
command line is F, calculate the PPM correction required as:
ppm=(F/780000-1)*1e6 In the future, specify this value as the argument to the
--ppm option on the comman line. You can verify that the ppm value has been
set correction by specifying --test-tone 780000 --ppm <ppm> on the command
line and confirming that the Pi is still zero beating the AM station.
******
PWM Peripheral:
******
The code uses the RPi PWM peripheral to time the frequency transitions
of the output clock. This peripheral is also used by the RPi sound system
and hence any sound events that occur during a WSPR transmission will
interfere with WSPR transmissions. Sound can be permanently disabled
by editing /etc/modules and commenting out the snd-bcm2835 device.
******
Example usage: ******
Brief help screen
./wspr --help
Transmit a constant test tone at 780 kHz.
sudo ./wspr --test-tone 780e3
Using callsign N9NNN, locator EM10, and TX power 33 dBm, transmit a single
WSPR transmission on the 20m band using NTP based frequency offset
calibration.
sudo ./wspr N9NNN EM10 33 20m
The same as above, but without NTP calibration:
sudo ./wspr --free-running N9NNN EM10 33 20m
Transmit a WSPR transmission slightly off-center on 30m every 10 minutes for
a total of 7 transmissions, and using a fixed PPM correction value.
sudo ./wspr --repeat --terminate 7 --ppm 43.17 N9NNN EM10 33 10140210 0 0 0 0
Transmit repeatedly on 40m, use NTP based frequency offset calibration,
and add a random frequency offset to each transmission to minimize collisions
with other transmitters.
sudo ./wspr --repeat --offset --self-calibration N9NNN EM10 33 40m
******
Reference documentation:
******
http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
http://www.scribd.com/doc/127599939/BCM2835-Audio-clocks
http://www.scribd.com/doc/101830961/GPIO-Pads-Control2
https://github.com/mgottschlag/vctools/blob/master/vcdb/cm.yaml
https://www.kernel.org/doc/Documentation/vm/pagemap.txt
******
Credits:
******
Credits goes to Oliver Mattos and Oskar Weigl who implemented PiFM [1]
based on the idea of exploiting RPi DPLL as FM transmitter.
Dan MD1CLV combined this effort with WSPR encoding algorithm from F8CHK,
resulting in WsprryPi a WSPR beacon for LF and MF bands.
Guido PE1NNZ <[email protected]> extended this effort with DMA based PWM
modulation of fractional divider that was part of PiFM, allowing to operate
the WSPR beacon also on HF and VHF bands. In addition time-synchronisation
and double amount of power output was implemented.
James Peroulas <[email protected]> added several command line options, a
makefile, improved frequency generation precision so as to be able to
precisely generate a tone at a fraction of a Hz, and added a self calibration
feature where the code attempts to derrive frequency calibration information
from an installed NTP deamon. Furthermore, the TX length of the WSPR symbols
is more precise and does not vary based on system load or PWM clock
frequency.
Michael Tatarinov for adding a patch to get PPM info directly from the
kernel.
Retzler András (HA7ILM) for the massive changes that were required to
incorporate the mailbox code so that the RPi2 and RPi3 could be supported.
[1] PiFM code from
http://www.icrobotics.co.uk/wiki/index.php/Turning_the_Raspberry_Pi_Into_an_FM_Transmitter
[2] Original WSPR Pi transmitter code by Dan:
https://github.com/DanAnkers/WsprryPi
[3] Fork created by Guido:
https://github.com/threeme3/WsprryPi
[4] This fork created by James:
https://github.com/JamesP6000/WsprryPi