Skip to content

Latest commit

 

History

History
61 lines (45 loc) · 1.44 KB

README.md

File metadata and controls

61 lines (45 loc) · 1.44 KB
Raw

Micro GSM Network

Header

Description

This project aims to use the LimeNET Micro Software Defined Radio to set up a public GSM network using Yate and YateBTS. The rationale for this project was to study and experiment mobile communications and the GSM protocol with a low-end device. It creates simple and basic GSM network for SMS and voice calls running on a LimeNET Micro with a Raspberry Pi CM3 board flashed with Ubuntu 20.04 LTS.

Table of Contents

Installation

Hardware Requirements

  • LimeNET Micro SDR
  • Antennas for 900MHz (EMEA GSM-900 band)
  • Raspberry Pi compute module 3

Software Requirements

  • Yate
  • YateBTS
  • LimeUtil

Steps

  1. Clone the Repository:

    git clone https://github.com/OxMarco/Micro-GSM-Network.git

  2. Install Dependencies:

    sudo apt-get update
sudo apt-get install yate yatebts

  3. Run Setup Script:

    ./setup.sh

Usage

  1. Init the Lime toolkit software:

    LimeUtil --update

  2. Run scripts: Run the .sh scripts one by one to initialise the GSM stack.

License

This project is licensed under the MIT License - see the LICENSE.md file for details.