Releases: NickvisionApps/Parabolic
V2023.8.1-rc1
A "We Cleared All Issues, Stop Opening More...Just Kidding" Tube Converter ‼️
Release candidate 1 of V2023.8.1 is here!
Compared to beta 2, we've improved the keyring and password dialogs allowing you to skip password entry and reset a locked keyring in case of a forgotten password. We also fixed an issue in which some opus files would fail to download and made it where if overwriting files is off and a download's file name exists, a numbered suffix will be attached to the end of the file name to prevent error.
A Message To Translators 🌏️
A stable release is planned for Friday August 11, 2023. Please have all translations updated before then to be included in the release!
Full Changelog 📃
- Added the option to prevent suspend while using Parabolic (#519)
- Added the ability to skip the password dialog when unlocking Keyring (#525)
- Added the ability to reset the Keyring when locked (#525)
- Improved bitrate used for audio-only downloads with the best quality (#507)
- Parabolic will now prefer videos with the h264 codec when downloading in the mp4 format. If space is a concern, users are recommended to download in the webm format which uses the vp* codec (#520)
- If overwriting files is off and a download's file name exists, a numbered suffix will be attached to the end of the file name to prevent error (#530)
- Fixed an issue where downloads with specific timeframes would download incorrectly (#509)
- Fixed an issue where opus downloads would sometimes fail (#534)
- Fixed an issue where Parabolic would be unusable on systems without NetworkManager installed (#513)
- Fixed an issue where Parabolic would say no active internet connection even though there was a connection established (#518)
- Updated translations (Thanks everyone on Weblate!)
Install 🧑💻
GNOME
flathub-beta:
flatpak remote-add --if-not-exists flathub-beta https://flathub.org/beta-repo/flathub-beta.flatpakrepo
flatpak install flathub-beta org.nickvision.tubeconverter
flatpak run org.nickvision.tubeconverter//beta
snap-store:
sudo snap install tube-converter --candidate
AUR
The parabolic-git package
Manually
- Download the
org.nickvision.tubeconverter-x64.flatpakfile from the assets below - Run
flatpak install org.nickvision.tubeconverter-x64.flatpakfrom the directory containing the .flatpak file - Run
flatpak run org.nickvision.tubeconverter//masterto start the app! (You should also see it in your app grid)
This is a beta version, bugs are expected. Please file a bug report for any issue found
V2023.8.1-beta2
A "We Cleared All Issues, Stop Opening More...Just Kidding" Tube Converter ‼️
Beta 2 of V2023.8.1 is here!
Compared to beta 1, this release adds the option to prevent system suspend while using Parabolic and tweaked the downloader to prefer h264 codec videos when downloading in the mp4 format. We also fixed an issue some users were experiencing where Parabolic claimed "No active internet connection" even though one was available.
Full Changelog 📃
- Added the option to prevent suspend while using Parabolic (#519)
- Improved bitrate used for audio-only downloads with the best quality (#507)
- Parabolic will now prefer videos with the h264 codec when downloading in the mp4 format. If space is a concern, users are recommended to download in the webm format which uses the vp* codec (#520)
- Fixed an issue where downloads with specific timeframes would download incorrectly (#509)
- Fixed an issue where Parabolic would be unusable on systems without NetworkManager installed (#513)
- Fixed an issue where Parabolic would say no active internet connection even though there was a connection established (#518)
- Updated translations (Thanks everyone on Weblate!)
Install 🧑💻
GNOME
flathub-beta:
flatpak remote-add --if-not-exists flathub-beta https://flathub.org/beta-repo/flathub-beta.flatpakrepo
flatpak install flathub-beta org.nickvision.tubeconverter
flatpak run org.nickvision.tubeconverter//beta
snap-store:
sudo snap install tube-converter --beta
AUR
The parabolic-git package
Manually
- Download the
org.nickvision.tubeconverter-x64.flatpakfile from the assets below - Run
flatpak install org.nickvision.tubeconverter-x64.flatpakfrom the directory containing the .flatpak file - Run
flatpak run org.nickvision.tubeconverter//masterto start the app! (You should also see it in your app grid)
This is a beta version, bugs are expected. Please file a bug report for any issue found
V2023.8.1-beta1
A "We Cleared All Issues, Stop Opening More...Just Kidding" Tube Converter ‼️
Beta 1 of V2023.8.1 is here!
This release brings many QOL improvements to Parabolic. Read more about them below :)
Full Changelog 📃
- Improved bitrate used for audio-only downloads with the best quality (#507)
- Fixed an issue where downloads with specific timeframes would download incorrectly (#509)
- Fixed an issue where Parabolic would be unusable on systems without NetworkManager installed (#513)
- Updated translations (Thanks everyone on Weblate!)
Install 🧑💻
GNOME
flathub-beta:
flatpak remote-add --if-not-exists flathub-beta https://flathub.org/beta-repo/flathub-beta.flatpakrepo
flatpak install flathub-beta org.nickvision.tubeconverter
flatpak run org.nickvision.tubeconverter//beta
snap-store:
sudo snap install tube-converter --beta
AUR
The parabolic-git package
Manually
- Download the
org.nickvision.tubeconverter-x64.flatpakfile from the assets below - Run
flatpak install org.nickvision.tubeconverter-x64.flatpakfrom the directory containing the .flatpak file - Run
flatpak run org.nickvision.tubeconverter//masterto start the app! (You should also see it in your app grid)
This is a beta version, bugs are expected. Please file a bug report for any issue found
V2023.8.0
A More Useful Tube Converter (I mean Parabolic) ‼️
V2023.8.0 is here!
In this release we've added select and deselect all buttons to a download's playlist page and added a proxy url setting in Preferences. We've also added a network connection monitor to Parabolic. On the side of bugs, we fixed an issue where docs were not available when running via snap and an issue where History wasn't saved correctly in json.
Full Changelog 📃
- Added buttons to select or deselect all items in a playlist (#478)
- Added a proxy setting in Preferences (#485)
- Parabolic will now check for an active network connection (#476)
- Fixed an issue where docs were not available when running Parabolic via snap (#492)
- Fixed an issue where History wasn't saved correctly in json (#494)
- Updated translations (Thanks everyone on Weblate!)
Install 🧑💻
GNOME
Flathub
flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
flatpak install flathub org.nickvision.tubeconverter
flatpak run org.nickvision.tubeconverter
Snap
sudo snap install tube-converter
AUR
The parabolic package
Manually
- Download the
org.nickvision.tubeconverter-x64.flatpakfile from the assets below - Run
flatpak install org.nickvision.tubeconverter-x64.flatpakfrom the directory containing the .flatpak file - Run
flatpak run org.nickvision.tubeconverter//masterto start the app! (You should also see it in your app grid)
V2023.8.0-rc3
A More Useful Tube Converter ‼️
Release Candidate 3 of V2023.8.0 is here!
This release fixes an issue in which the new proxy setting wasn't working.
RC1 Notes
In this release we've added select and deselect all buttons to a download's playlist page and added a proxy url setting in Preferences. We've also added a network connection monitor to Parabolic and fixed an issue where docs were not available when running via snap.
A Message To Translators 🌎️
A stable release is planned for Friday August 4. Please have all translations updated before then to be included in the release :)
Full Changelog 📃
- Added buttons to select or deselect all items in a playlist (#478)
- Added a proxy setting in Preferences (#485)
- Parabolic will now check for an active network connection (#476)
- Fixed an issue where docs were not available when running Parabolic via snap (#492)
- Updated translations (Thanks everyone on Weblate!)
Install 🧑💻
GNOME
flathub-beta:
flatpak remote-add --if-not-exists flathub-beta https://flathub.org/beta-repo/flathub-beta.flatpakrepo
flatpak install flathub-beta org.nickvision.tubeconverter
flatpak run org.nickvision.tubeconverter//beta
snap-store:
sudo snap install tube-converter --candidate
AUR
The parabolic-git package
Manually
- Download the
org.nickvision.tubeconverter-x64.flatpakfile from the assets below - Run
flatpak install org.nickvision.tubeconverter-x64.flatpakfrom the directory containing the .flatpak file - Run
flatpak run org.nickvision.tubeconverter//masterto start the app! (You should also see it in your app grid)
This is a beta version, bugs are expected. Please file a bug report for any issue found
V2023.8.0-rc2
A More Useful Tube Converter ‼️
Release Candidate 2 of V2023.8.0 is here!
This release fixes an issue in which the new proxy setting wasn't working.
RC1 Notes
In this release we've added select and deselect all buttons to a download's playlist page and added a proxy url setting in Preferences. We've also added a network connection monitor to Parabolic and fixed an issue where docs were not available when running via snap.
A Message To Translators 🌎️
A stable release is planned for Friday August 4. Please have all translations updated before then to be included in the release :)
Full Changelog 📃
- Added buttons to select or deselect all items in a playlist (#478)
- Added a proxy setting in Preferences (#485)
- Parabolic will now check for an active network connection (#476)
- Fixed an issue where docs were not available when running Parabolic via snap (#492)
- Updated translations (Thanks everyone on Weblate!)
Install 🧑💻
GNOME
flathub-beta:
flatpak remote-add --if-not-exists flathub-beta https://flathub.org/beta-repo/flathub-beta.flatpakrepo
flatpak install flathub-beta org.nickvision.tubeconverter
flatpak run org.nickvision.tubeconverter//beta
snap-store:
sudo snap install tube-converter --candidate
AUR
The parabolic-git package
Manually
- Download the
org.nickvision.tubeconverter-x64.flatpakfile from the assets below - Run
flatpak install org.nickvision.tubeconverter-x64.flatpakfrom the directory containing the .flatpak file - Run
flatpak run org.nickvision.tubeconverter//masterto start the app! (You should also see it in your app grid)
This is a beta version, bugs are expected. Please file a bug report for any issue found
V2023.8.0-rc1
A More Useful Tube Converter ‼️
Release Candidate 1 of V2023.8.0 is here!
In this release we've added select and deselect all buttons to a download's playlist page and added a proxy url setting in Preferences. We've also added a network connection monitor to Parabolic and fixed an issue where docs were not available when running via snap.
A Message To Translators 🌎️
A stable release is planned for Friday August 4. Please have all translations updated before then to be included in the release :)
Full Changelog 📃
- Added buttons to select or deselect all items in a playlist (#478)
- Added a proxy setting in Preferences (#485)
- Parabolic will now check for an active network connection (#476)
- Fixed an issue where docs were not available when running Parabolic via snap (#492)
- Updated translations (Thanks everyone on Weblate!)
Install 🧑💻
GNOME
flathub-beta:
flatpak remote-add --if-not-exists flathub-beta https://flathub.org/beta-repo/flathub-beta.flatpakrepo
flatpak install flathub-beta org.nickvision.tubeconverter
flatpak run org.nickvision.tubeconverter//beta
snap-store:
sudo snap install tube-converter --candidate
AUR
The parabolic-git package
Manually
- Download the
org.nickvision.tubeconverter-x64.flatpakfile from the assets below - Run
flatpak install org.nickvision.tubeconverter-x64.flatpakfrom the directory containing the .flatpak file - Run
flatpak run org.nickvision.tubeconverter//masterto start the app! (You should also see it in your app grid)
This is a beta version, bugs are expected. Please file a bug report for any issue found
V2023.7.3
A Cleaner Tube Converter 🧹
V2023.7.3 is here!
In this release we improved the design of the Keyring dialog making it cleaner and more user friendly. We also added a History dialog that allows users to manage previously downloaded videos!
Behind the scenes, we upgraded to gir.core V0.4.0 which brings many improvements to using GTK and asynchronous programming in C#. As a result of this update, our code is a lot cleaner and easier to read.
Full Changelog 📃
- Added a History dialog to manage previously downloaded videos (#453)
- Improved Keyring Dialog design (#454)
- Improved backend's parsing of video resolutions (#481)
- Updated translations (Thanks everyone on Weblate!)
Install 🧑💻
GNOME
Flathub
flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
flatpak install flathub org.nickvision.tubeconverter
flatpak run org.nickvision.tubeconverter
Snap
sudo snap install tube-converter
AUR
The parabolic package
Manually
- Download the
org.nickvision.tubeconverter-x64.flatpakfile from the assets below - Run
flatpak install org.nickvision.tubeconverter-x64.flatpakfrom the directory containing the .flatpak file - Run
flatpak run org.nickvision.tubeconverter//masterto start the app! (You should also see it in your app grid)
V2023.7.3-rc1
A Cleaner Tube Converter 🧹
Release Candidate 1 of V2023.7.3 is here!
Compared to beta 1, we added a History dialog that allows users to manage previously downloaded videos!
A Message To Translators 🌎️
A stable release is planned for Wednesday July 26. Please have all translations updated before then to be included in the release :)
Full Changelog 📃
- Added a History dialog to manage previously downloaded videos (#453)
- Improved Keyring Dialog design (#454)
- Updated translations (Thanks everyone on Weblate!)
Install 🧑💻
GNOME
flathub-beta:
flatpak remote-add --if-not-exists flathub-beta https://flathub.org/beta-repo/flathub-beta.flatpakrepo
flatpak install flathub-beta org.nickvision.tubeconverter
flatpak run org.nickvision.tubeconverter//beta
snap-store:
sudo snap install tube-converter --candidate
AUR
The parabolic-git package
Manually
- Download the
org.nickvision.tubeconverter-x64.flatpakfile from the assets below - Run
flatpak install org.nickvision.tubeconverter-x64.flatpakfrom the directory containing the .flatpak file - Run
flatpak run org.nickvision.tubeconverter//masterto start the app! (You should also see it in your app grid)
This is a beta version, bugs are expected. Please file a bug report for any issue found
V2023.7.3-beta1
A Cleaner Tube Converter 🧹
Beta 1 of V2023.7.3 is here!
In this release we improved the design of the Keyring dialog making it cleaner and more user friendly.
Behind the scenes, we upgraded to gir.core V0.4.0 which brings many improvements to using GTK and asynchronous programming in C#. As a result of this update, our code is a lot cleaner and easier to read.
Because this is such a big change, we urge all willing users to give this beta a shot and make sure everything still works correctly :)
Full Changelog 📃
- Improved Keyring Dialog design (#454)
- Updated translations (Thanks everyone on Weblate!)
Install 🧑💻
GNOME
flathub-beta:
flatpak remote-add --if-not-exists flathub-beta https://flathub.org/beta-repo/flathub-beta.flatpakrepo
flatpak install flathub-beta org.nickvision.tubeconverter
flatpak run org.nickvision.tubeconverter//beta
snap-store:
sudo snap install tube-converter --beta
Manually
- Download the
org.nickvision.tubeconverter-x64.flatpakfile from the assets below - Run
flatpak install org.nickvision.tubeconverter-x64.flatpakfrom the directory containing the .flatpak file - Run
flatpak run org.nickvision.tubeconverter//masterto start the app! (You should also see it in your app grid)
This is a beta version, bugs are expected. Please file a bug report for any issue found